ETH/USB HUB HAT
| ||
| ||
Instructions
Ethernet / USB HUB HAT for Raspberry Pi, 1x RJ45 Ethernet Port, 3x USB Ports
How to use it
- Insert the ETH/USB HUB HAT into Raspberry Pi. Connect the USB interface of Raspberry Pi to the micro USB interface of ETH/USB HUB HAT.
- Connect Network cable to RJ45 interface of ETH/USB HUB HAT.
- Power on Raspberry Pi, the PWR indicator lights on and the ACT indicator is flashing. Now you can check the network and USB ports.
- When USB devices are connected to USB1~USB3 ports, related LED D1-D3 light on.
Interfaces
| SYMBOL | Description |
|---|---|
| USB | USB interface, should be connected to the USB port of the Raspberry Pi |
| USB1~USB3 | Extended USB ports, can be connected to external USB devices |
| ETH | RJ45 port, can be connected to a wired network |
Resources
FAQ
In addition, if the USB port of the Raspberry Pi ZERO is set to a wired network card, the USB HUB will not be recognized.
The USB 2.0 of the CM4 is disabled by default. If you need to open it, you can add it in config.txt.
dtoverlay=dwc2,dr_mode host
Connect the USB HUT interface to the computer with a USB cable to see if the computer can recognize the USB HUB. If the module can be recognized it should work fine. Check the USB connector for poor contact.
In addition, if the USB port of the Raspberry Pi ZERO is set to a wired network card, the USB HUB will not be recognized.
{{{5}}}
Support
Technical Support
If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)