PI4-CASE-NANOSOUND-ONE
| ||
Note:Please assemble the case before you insert the Micro SD card!!!
Install VOLUMIO System
1、 Hardware required:Micro SD card, card reader.
2、 Install image from Volumio website
3、 Use SDFormatter.exe software to format the micro sd card.
4、 Use Win32DiskImager.exe software to write image.
600px
Access VOLUMIO
Method 1: Connect wired network, and access VOLUMIO by browser
1、Check the IP address of Raspberry Pi in router manager page (or connect a display and check it)
600px
2、 Access VILUMIO by browser.
600px
Method 2: Connect wireless network and access VLOLUMIOby browser
1、Use telephone to connect VOLUMIO hotspot, and go to http://volumio.local or 192.168.211.1 by browser.
300px
300px
300px
2、Check the IP address of Raspberry Pi in router manager page.
600px
3、Access VOLUMIOby browser
600px
Install Plugins
1、Access volumio and click Plugins, choose Search Plugins->Miscellanea, install NanoSound One tools.
600px
600px
2、Click the Plugins installed to enable the function点击已安装的插件打开对应的插件功能
600px
Power Button：
| Status of Raspberry Pi | Behaviour | Function |
|---|---|---|
| OFF | Single press | Start |
| ON | Long-press (>3s) | Shutdown |
| ON | Long-press (< 3s) | No function |
| ON | Double-click | reboot |
| ON | Long-press (>5s)上 | Force shutdown |
Install Display Plugins
1、Access volumio and click Plugsins, choose Search Plugins->Miscellanea, and install Touch Display plugins.
600px
2、Enable the display function, connect a displays and test
600px
600px
Upload music to volumio by network
1、Open a file manager and enter the share path.(\\IP_Address_Raspberry), enter the Internal Storage directory and upload music.
600px
2、Enter Misic Library and play music
600px
