|caption=4inch Resistive Touch Screen LCD, HDMI interface, IPS Screen, Designed for Raspberry Pi
4inch Resistive Touch Screen LCD, HDMI interface, IPS Screen, Designed for Raspberry Pi.
3 KB (501 words) - 06:42, 4 September 2023
SPI is another communication interface on Raspberry Pi.
This section explains how to use a SPI interface on the Pi.
5 KB (535 words) - 02:10, 23 August 2016
|caption=4inch Resistive Touch Screen LCD(C), HDMI interface, IPS Screen, Designed for Raspberry Pi
{{FAQ|How to solve the abnormal BOOT interface when the Raspberry Pi 4B is connected?
3 KB (421 words) - 12:04, 20 October 2023
|caption=4.3inch capacitive Touch Screen LCD<br/>HDMI interface, supports various systems
4.3-inch Capacitive Touch Screen LCD, HDMI interface, with a resolution of 800 × 480 and a capacitive touch panel, which suppor
3 KB (421 words) - 06:49, 4 September 2023
*PCIE interface is not enabled on the Raspberry Pi by default.
1: Enable PCIE interface:
3 KB (558 words) - 03:13, 19 March 2024
·Type-C Interface: Power interface, require 5V/3A power adapter.
·40PIN GPIO: Standart 40PIn GPIO for accessories.
3 KB (396 words) - 03:20, 7 December 2023
*Standard Raspberry Pi 40PIN
GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
*<AD/DA> PCF8591, 8-bit resolution, screw terminal IO
interface.
3 KB (412 words) - 07:28, 1 September 2023
|interface=GPIO
*Standard 40PIN GPIO header, directly pluggable onto the Jetson Nano.
2 KB (234 words) - 03:56, 6 December 2023
·Type-C Interface: Power interface, require 5V/3A power adapter.
·40PIN GPIO: Standart 40PIn GPIO for accessories.
2 KB (331 words) - 10:29, 16 August 2023
Enable 1-Wire interface with the raspi-config tool.
...r instance, because GPIO 4 (BCM numbering, can be checked by this command: gpio readall) is used for I/O by default so "gpiopin=4" is not usually required.
7 KB (1,004 words) - 12:21, 10 November 2023
*Make sure that the HDMI interface of the PC can output normally.
*The overall thickness of the screen and PCB board (including the HDMI interface) is about 13.8mm.
5 KB (698 words) - 07:29, 15 September 2023
...y Pi to connect two cameras. You can switch the cameras by controlling the GPIO.
...etween the HDMI1 interface and the audio jack. If you use Pi zero, the CSI interface is on the side of the Power port. Here is the diagram of Pi 4.<br />
4 KB (618 words) - 02:10, 27 February 2024
...h Raspberry Pi Compute Module 4. Although it is tiny, it can bring out the interface of Raspberry Pi Compute Module 4 with an onboard camera.
3. The USB Type-C interface can be used as a power supply or as a USB SLAVE interface to program the image.<br/>
5 KB (736 words) - 07:10, 16 April 2024
*Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B.
*OLED control interface: I2C
5 KB (750 words) - 08:32, 23 March 2024
|caption=4.3inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi
4.3inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi.
3 KB (441 words) - 06:42, 4 September 2023
·Type-C Interface: Power interface, require 5V/3A power adapter.
·40PIN GPIO: Standart 40PIn GPIO for accessories.
3 KB (436 words) - 03:17, 7 December 2023
Onboard 4-ch USB interface, Fast Ethernet port and HDMI port, Raspberry Pi Zero 2W To 3B Adapter is an
*Onboard Raspberry Pi 40 Pin GPIO interface pad, suitable for Raspberry Pi series expansion boards<br />
3 KB (379 words) - 08:01, 17 August 2023
|caption=Serial Expansion HAT for Raspberry Pi, I2C Interface
|interface3 = GPIO
2 KB (297 words) - 09:04, 26 February 2024
==I2C Interface==
...Nano onboards 2-ch I2C interface, OLED on the JetBot is controlled by I2C interface. We can check the I2C device by i2ctool. The last parameter of the command
3 KB (544 words) - 07:54, 5 July 2022
...f industrial isolated interface resources (such as CAN, RS485, RS232, ADC, GPIO, etc.), which is suitable for various industrial IoT applications.
...tiation Ethernet port, supports power via the PoE Ethernet interface (RJ45 interface specification).
7 KB (919 words) - 08:29, 19 April 2024
