RP2350 2inch Capacitive Touch Display Development Board, 240×320 Pixels, IPS Panel, 262K Color, Onboard Camera Interface

$14.99 - $19.99
OV5640 camera module
Related Products:

Details

RP2350 2inch Capacitive Touch Display Development Board, 240×320 Pixels, IPS Panel, 262K Color, Onboard Camera Interface, Optional for OV5640 Camera
RP2350-Touch-LCD-2

Based on Raspberry Pi RP2350

RP2350 2inch touch display development board, front view RP2350 2inch touch display development board, features
Version Options
RP2350-Touch-LCD-2

RP2350-Touch-LCD-2
Standard version

RP2350-Touch-LCD-2-C

RP2350-Touch-LCD-2-C
Comes with an OV5640 camera

Features

RP2350-Touch-LCD-2 is a low-cost, high-performance MCU board designed by Waveshare, tiny size, with onboard 2inch capacitive touch LCD, camera interface, TF card slot, Lithium battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and so on, which makes it easy for you to develop and integrate it into the products quickly.

Key features include:

  • RP2350 microcontroller chip designed by Raspberry Pi in the United Kingdom
  • Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz
  • 520KB SRAM and 16MB onboard Flash memory
  • Type-C connector, improving device compatibility, easier to use
  • Onboard 2inch capacitive touch display, 240 × 320 resolution, 262K color
  • Onboard camera interface, compatible with mainstream cameras such as OV2640 and OV5640 for image and video acquisition
  • Lithium battery recharge/discharge header, suitable for mobile devices
  • USB 1.1 with device and host support
  • Low-power sleep and dormant modes
  • Drag-and-drop programming using mass storage over USB
  • Adapting 22 × GPIO pins for flexible configuration of pin function
  • 2 × SPI, 2 × I2C, 2 × UART, 2 × 12-bit ADC, 14 × controllable PWM channels
  • Accurate clock and timer on-chip
  • Temperature sensor
  • 12 × Programmable I/O (PIO) state machines for custom peripheral support


IPS Display Panel

Excellent display performance, 262K color, wide viewing angle

RP2350 2inch Touch LCD, adopts IPS display panel
Supports OV2640 / 0V5640 and other mainstream cameras

Optional for OV5640 5MP camera module, suitable for image capture, video monitoring and other applications to meet different needs

RP2350 2inch touch display development board, supports OV2640 / 0V5640 and other mainstream cameras
usage example
RP2350 2inch touch display development board, usage example

* Note: the OV5640 camera is optional.


dual-core, dual-architecture

The unique dual-core, dual-architecture capability of RP2350 allows users to choose between a pair of industry-standard Arm Cortex-M33 cores, and a pair of open-hardware Hazard3 cores, giving developers a chance to experiment with the RISC-V architecture in a stable, well-supported environment

RP2350 2inch display development board, onboard Dual-Core Arm processor

Supports C/C++, MicroPython, Arduino IDE

Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started


What's On Board
RP2350 2inch touch display development board, onboard components

Pin Definition
RP2350 2inch touch display development board, pin definition

outline dimensions
RP2350 2inch touch display development board, outline dimensions
Resources & Services
Pico Product Selection
PRODUCTVoltage regulator chipUSBFlashLithium battery headerOnboard LCD
RP2350 chip

Raspberry Pi Pico 2
DC-DC, 800mA Micro USB 4MB - -

Raspberry Pi Pico 2 W
DC-DC, 800mA Micro USB 4MB - with WIFI and Bluetooth

Type-A ver.
LDO, 500mA Type-A 4MB - -

Type-C ver.
LDO, 800mA Type-C 4MB - -

Tiny ver.
LDO, 800mA Separate Type-C port adapter 4MB - Separate adapter board design, adapting USB Type-C port via FPC

ETH Port ver.
LDO, 800mA Type-C 4MB - with Ethernet port

USB ver.
LDO, 500mA Type-A, Type-C 2MB - with PIO-USB Type-A and USB Type-C port

1.28inch Round LCD ver.
LDO, 300mA Type-C 4MB Support(allows recharging the battery and powering the board at the same time) 1.28inch IPS LCD

1.28inch Round Touch LCD ver.
LDO, 300mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.28inch IPS touch LCD

1.43inch Round Touch AMOLED ver.
DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.43inch AMOLED Touch LCD

1.69inch Touch LCD ver.
LDO, 500mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.69inch Touch LCD

2inch Touch LCD ver.
DC-DC, 2000mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 2inch Touch LCD

2.8inch Touch LCD ver.
LDO, 800mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 2.8inch IPS Touch LCD

0.96 LCD ver.
DC-DC, 2000mA Type-C 4MB Support(allows recharging the battery and powering the board at the same time) 0.96inch IPS LCD

Plus ver.
DC-DC, 2000mA Type-C 4MB/16MB Support(allows recharging the battery and powering the board at the same time) -
RP2040 chip

Raspberry Pi Pico W
DC-DC, 3000mA Micro USB 2MB - with WIFI

Raspberry Pi Pico WH
DC-DC, 3000mA Micro USB 2MB - with WIFI

Raspberry Pi Pico
DC-DC, 800mA Micro USB 2MB - -

Raspberry Pi Pico H
DC-DC, 800mA Micro USB 2MB - -

Type-A ver.
LDO, 500mA Type-A 4MB - -

Mini ver.
LDO, 800mA Type-C 2MB - -

Tiny ver.
LDO, 500mA Separate Type-C port adapter 2MB - Separate adapter board design, adapting USB Type-C port via FPC

RGB Matrix ver.
LDO, 500mA Type-C 2MB - Onboard 5×5 RGB LED matrix

BLE ver.
LDO, 300mA Separate Type-C port adapter 2MB - Supports Bluetooth 5.1, separate adapter board design, adapting USB Type-C port via FPC

ETH Port ver.
LDO, 500mA Type-C 4MB - with Ethernet port

0.99inch Round LCD with case ver.
LDO, 500mA Type-C 2MB - 0.99inch IPS LCD, CNC metal case

1.28inch Round LCD ver.
LDO, 300mA Type-C 2MB Support(allows recharging the battery and powering the board at the same time) 1.28inch IPS LCD

1.28inch Round LCD with case ver.
LDO, 300mA Type-C 2MB Support(allows recharging the battery and powering the board at the same time) 1.28inch IPS LCD, CNC metal case

1.28inch Round Touch LCD ver.
LDO, 500mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.28inch Touch LCD

1.28inch Round Touch LCD with case ver.
LDO, 500mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.28inch Touch LCD, CNC metal case

1.69inch Touch LCD ver.
LDO, 500mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) 1.69inch Touch LCD

0.96 LCD ver.
DC-DC, 1800mA Type-C 2MB Support(allows recharging the battery and powering the board at the same time) 0.96inch IPS LCD

Plus ver.
DC-DC, 1800mA Type-C 4MB/16MB Support(allows recharging the battery and powering the board at the same time) -

DVI port ver.
LDO, 300mA Type-C 16MB Support(allows recharging the battery and powering the board at the same time) Onboard DVI interface, TF card slot and PIO-USB port

Cam & LCD ver.
- Type-C 16MB - Onboard grayscale camera and 1.14inch IPS LCD display

Quick Overview

  1. RP2350-Touch-LCD-2 x 1
  2. OPTIONS OV5640 camera x 1
1RP2350-Touch-LCD-2
2OV5640 camera