Raspberry Pi Pico 2 Microcontroller Board, Based on Official RP2350 Chip, Dual-core & Dual-architecture Design, Various Development Kit Options

$5.99 - $51.99

Pico 2 Single Board or Dev Kits

Pico 2 Original Pico 2 with pre-soldered header (mono)Pico 2 with pre-soldered header (color-coded)Pico 2 Starter Kit Pico 2 Basic Kit Pico 2 Evaluation Kit Pico 2 Sensor Kit

Description
Package Content

Details

Raspberry Pi Pico 2 Microcontroller Board, Based on Official RP2350 Chip, Dual-core & Dual-architecture Design, Various Development Kit Options

Raspberry Pi Pico 2

a tiny, fast, and versatile microcontroller board

Built Using RP2350 Microcontroller Chip Designed By Raspberry Pi

Board specifications

Raspberry Pi Pico 2 is a low-cost, high-performance microcontroller board with flexible digital interfaces. It incorporates Raspberry Pi's own RP2350 microcontroller chip, with unique dual-core and dual-architecture design, running up to 150 MHz, embedded 520KB of SRAM and 4MB of on-board Flash memory, as well as 26x multi-function GPIO pins.

For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available. There're also complete development resources and tutorials to help you get started easily, and integrate it into end products quickly.

Key features include:

RP2350 microcontroller chip designed by Raspberry Pi in the United Kingdom
Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz
520KB of SRAM, and 4MB of on-board Flash memory
Castellated module allows soldering direct to carrier boards
USB 1.1 with device and host support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
26 × multi-function GPIO pins
2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 24 × controllable PWM channels
Temperature sensor
12 × Programmable I/O (PIO) state machines for custom peripheral support

Pico Comparison

Model	Raspberry Pi Pico 2	Raspberry Pi Pico
processor	Dual-core ARM Cortex-M33 or dual-core Hazard3 RISC-V @150MHz	Dual-core ARM Cortex-M0+ @133MHz
SRAM	520KB	264KB
Flash	4MB	2MB
Security	Signed boot support, OTP storage for boot decryption key, and hardware SHA-256 accelerator, etc.	-
Peripherals	2 × UART 2 × SPI 2 × I2C 3 × ADC 1 × USB 1.1 and PHY
	12 × PIO state machines	8 × PIO state machines
	24 × PWM	16 × PWM
	1 × HSTX	-
GPIO pins	26

Version Options

Kit Selection Guide

Pico 2 Starter Kit

This kit includes the Raspberry Pi Pico 2 with pre-soldered header (mono), a experimental board, jumper wires, and a clear Acrylic protection case, which is more convenient to get started and begin your DIY creations.

Pico 2 Basic Kit

On the basis of the starter kit, this kit includes LCD1602 RGB Module, PIR motion sensor, RGB LED, alarm, single-joint potentiometer, and 5mm LED, etc. With the official tutorial, fast getting started with MicroPython programming.

Pico 2 Evaluation Kit

On the basis of the starter kit, this kit includes Pico-LCD-1.3, Pico-10DOF-IMU and Pico-Dual-Expander, etc. Simply connect the Pico 2 and these two Pico HAT to the GPIO expander board, you can quickly set up a fully functional evaluation platform and start your innovation journey.

Pico 2 Sensor Kit

On the basis of the starter kit, equipped with entry-level Raspberry Pi Pico 2 Sensor Kit which is including 15 common modules such as LED, button, buzzer, etc. All-in-one design, all modules are connected to Pico 2 via PCB castellated holes, no soldering or wiring required. Each module can be easily separated for individual use, offering more flexibility for your experiments and projects. Standard Raspberry Pi Pico 2 header, plug-and-play, also comes with clear Acrylic protection case, this kit is your ideal choice to quickly build prototypes or explore the functionality of various sensors

The Raspberry Pi Pico Sensor Kit includes

Standard Raspberry Pi Pico 2 header
1.5inch OLED Module
6-Axis Motion Sensor
Potentiometer Module
Photosensitive Resistor Module
Sound Sensor Module
RGB LED Module
Buzzer Module

VOC Sensor Module
IR Receiver Module
IR Transmitter Module
Button Module
LED Module
Temperature/Humidity Sensor Module
EEPROM Module
Motor Drive Module

C/C++, MicroPython support

Comprehensive SDK, dev resources, tutorials to help you easily get started

dual-core, dual-architecture

The unique dual-core, dual-architecture capability of RP2350 allows users to choose between a pair of industry-standard Arm Cortex-M33 cores, and a pair of open-hardware Hazard3 cores, giving developers a chance to experiment with the RISC-V architecture in a stable, well-supported environment

26 × multi-function GPIO pins

configurable pin function, allows flexible development and integration

outline dimensions

Resources & Services

Wiki: www.waveshare.com/wiki/Raspberry_Pi_Pico_2

Pico Product Selection

PRODUCT	Voltage regulator chip	USB	Flash	Lithium battery header	Onboard LCD
RP2350 chip
Raspberry Pi Pico 2	DC-DC, 800mA	Micro USB	4MB	-	-
RP2040 chip
Raspberry Pi Pico W	DC-DC, 3000mA	Micro USB	2MB	-	with WIFI
Raspberry Pi Pico WH	DC-DC, 3000mA	Micro USB	2MB	-	with WIFI
Raspberry Pi Pico	DC-DC, 800mA	Micro USB	2MB	-	-
Raspberry Pi Pico H	DC-DC, 800mA	Micro USB	2MB	-	-
Type-A ver.	LDO, 500mA	Type-A	4MB	-	-
Mini ver.	LDO, 800mA	Type-C	2MB	-	-
Tiny ver.	LDO, 500mA	Separate Type-C port adapter	2MB	-	Separate adapter board design, adapting USB Type-C port via FPC
RGB Matrix ver.	LDO, 500mA	Type-C	2MB	-	Onboard 5×5 RGB LED matrix
BLE ver.	LDO, 300mA	Separate Type-C port adapter	2MB	-	Supports Bluetooth 5.1, separate adapter board design, adapting USB Type-C port via FPC
ETH Port ver.	LDO, 500mA	Type-C	4MB	-	with Ethernet port
0.99inch Round LCD with case ver.	LDO, 500mA	Type-C	2MB	-	0.99inch IPS LCD, CNC metal case
1.28inch Round LCD ver.	LDO, 300mA	Type-C	2MB	Support(allows recharging the battery and powering the board at the same time)	1.28inch IPS LCD
1.28inch Round LCD with case ver.	LDO, 300mA	Type-C	2MB	Support(allows recharging the battery and powering the board at the same time)	1.28inch IPS LCD, CNC metal case
1.28inch Round Touch LCD ver.	LDO, 500mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	1.28inch Touch LCD
1.28inch Round Touch LCD with case ver.	LDO, 500mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	1.28inch Touch LCD, CNC metal case
1.69inch Touch LCD ver.	LDO, 500mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	1.69inch Touch LCD
0.96 LCD ver.	DC-DC, 1800mA	Type-C	2MB	Support(allows recharging the battery and powering the board at the same time)	0.96inch IPS LCD
Plus ver.	DC-DC, 1800mA	Type-C	4MB/16MB	Support(allows recharging the battery and powering the board at the same time)	-
DVI port ver.	LDO, 300mA	Type-C	16MB	Support(allows recharging the battery and powering the board at the same time)	Onboard DVI interface, TF card slot and PIO-USB port
Cam & LCD ver.	-	Type-C	16MB	-	Onboard grayscale camera and 1.14inch IPS LCD display