- Description
- Package Content
Details
a Pico-like MCU board based on Raspberry Pi RP2040
Compatible with most of the Raspberry Pi Pico add-on modules
RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip, as same as the one on Raspberry Pi Pico. For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly.
In additional, there're also onboard 0.96inch IPS display, Lithium battery recharge/discharge header, and high efficiency DC-DC buck-boost chip.
Key features include:
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of on-board Flash memory
- USB-C connector, keeps it up to date, easier to use
- 0.96inch 160×80 pixels 65K colorful IPS LCD display
- Lithium battery recharge/discharge header, suitable for mobile devices
- Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current
- Castellated module allows soldering direct to carrier boards (there should be dedicated cut-out for embedding the bottom components)
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 8 × Programmable I/O (PIO) state machines for custom peripheral support
Comprehensive SDK, dev resources, tutorials to help you easily get started
Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
configurable pin function, allows flexible development and integration
- USB Type-C connector
- BOOT button
press it when resetting to enter download mode - RESET button
- 0.96inch IPS LCD display
160 × 80 pixels, 65K colorful - Battery header
MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time - MP28164
high efficiency DC-DC buck-boost chip
- ETA6096
high efficiency Lithium battery recharge manager - RP2040
dual-core processor, up to 133MHz operating frequency - W25Q16JVUXIQ
2MB NOR-Flash - DEBUG points
- Pinout
compatible with Raspberry Pi Pico
PRODUCT | Voltage regulator chip | USB | Flash | Lithium battery header | Onboard LCD |
---|---|---|---|---|---|
RP2350 chip | |||||
Raspberry Pi Pico 2 |
DC-DC, 800mA | Micro USB | 4MB | - | - |
Type-C ver. |
LDO, 800mA | Type-C | 4MB | - | - |
ETH Port ver. |
LDO, 800mA | Type-C | 4MB | - | with Ethernet port |
1.28inch Round LCD ver. |
LDO, 300mA | Type-C | 4MB | Support(allows recharging the battery and powering the board at the same time) | 1.28inch IPS LCD |
1.28inch Round Touch LCD ver. |
LDO, 300mA | Type-C | 16MB | Support(allows recharging the battery and powering the board at the same time) | 1.28inch IPS touch LCD |
Plus ver. |
DC-DC, 2000mA | Type-C | 4MB | Support(allows recharging the battery and powering the board at the same time) | - |
RP2040 chip | |||||
Raspberry Pi Pico W |
DC-DC, 3000mA | Micro USB | 2MB | - | with WIFI |
Raspberry Pi Pico WH |
DC-DC, 3000mA | Micro USB | 2MB | - | with WIFI |
Raspberry Pi Pico |
DC-DC, 800mA | Micro USB | 2MB | - | - |
Raspberry Pi Pico H |
DC-DC, 800mA | Micro USB | 2MB | - | - |
Type-A ver. |
LDO, 500mA | Type-A | 4MB | - | - |
Mini ver. |
LDO, 800mA | Type-C | 2MB | - | - |
Tiny ver. |
LDO, 500mA | Separate Type-C port adapter | 2MB | - | Separate adapter board design, adapting USB Type-C port via FPC |
RGB Matrix ver. |
LDO, 500mA | Type-C | 2MB | - | Onboard 5×5 RGB LED matrix |
BLE ver. |
LDO, 300mA | Separate Type-C port adapter | 2MB | - | Supports Bluetooth 5.1, separate adapter board design, adapting USB Type-C port via FPC |
ETH Port ver. |
LDO, 500mA | Type-C | 4MB | - | with Ethernet port |
0.99inch Round LCD with case ver. |
LDO, 500mA | Type-C | 2MB | - | 0.99inch IPS LCD, CNC metal case |
1.28inch Round LCD ver. |
LDO, 300mA | Type-C | 2MB | Support(allows recharging the battery and powering the board at the same time) | 1.28inch IPS LCD |
1.28inch Round LCD with case ver. |
LDO, 300mA | Type-C | 2MB | Support(allows recharging the battery and powering the board at the same time) | 1.28inch IPS LCD, CNC metal case |
1.28inch Round Touch LCD ver. |
LDO, 500mA | Type-C | 16MB | Support(allows recharging the battery and powering the board at the same time) | 1.28inch Touch LCD |
1.28inch Round Touch LCD with case ver. |
LDO, 500mA | Type-C | 16MB | Support(allows recharging the battery and powering the board at the same time) | 1.28inch Touch LCD, CNC metal case |
1.69inch Touch LCD ver. |
LDO, 500mA | Type-C | 16MB | Support(allows recharging the battery and powering the board at the same time) | 1.69inch Touch LCD |
0.96 LCD ver. |
DC-DC, 1800mA | Type-C | 2MB | Support(allows recharging the battery and powering the board at the same time) | 0.96inch IPS LCD |
Plus ver. |
DC-DC, 1800mA | Type-C | 4MB/16MB | Support(allows recharging the battery and powering the board at the same time) | - |
DVI port ver. |
LDO, 300mA | Type-C | 16MB | Support(allows recharging the battery and powering the board at the same time) | Onboard DVI interface, TF card slot and PIO-USB port |
Cam & LCD ver. |
- | Type-C | 16MB | - | Onboard grayscale camera and 1.14inch IPS LCD display |
Quick Overview
RP2040-LCD-0.96
- RP2040-LCD-0.96 x1
RP2040-LCD-0.96-M
- RP2040-LCD-0.96 with pre-soldered header x1