Jetson Nano Developer Kit

Jetson Nano Module NVIDIA Jetson Nano Module with 16G EMMC

Jetson Nano Developer Kit NVIDIA Jetson Nano Developer Kit.

{{{name3}}}

{{{name4}}}

{{{name5}}}

{{{name6}}}

Primary Attribute Category: {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: NVIDIA

Website International: Website Chinese: 中文官网

Onboard Interfaces

Related Products Jetson Nano Module JETSON-NANO-DEV-KIT Jetson Nano Developer Kit (B01) Jetson Nano 2GB Developer Kit Jetson TX2 NX Jetson AGX Xavier Developer Kit Jetson Xavier NX Jetson Xavier NX Developer Kit

Overview

The NVIDIA® Jetson Nano™ Developer Kit is an AI computer for makers, learners, and developers that brings the power of modern artificial intelligence to a low-power, easy-to-use platform. Get started quickly with out-of-the-box support for many popular peripherals, add-ons, and ready-to-use projects.

Video

Resources

Software

• Panasonic_SDFormatter
• Win32DiskImager
• putty

Jetson Official Resources

• Jetson Nano Developer Kit User Guide
• Jetson Nano Get Start
• Jetson Nano 3D Drawing
• Jetson Nano Deverloper Kit 3D Drawing
• Jetson Download Center
• Jetson Nano Forum
• Jetson Github

Course

• Free AI courses based on Jetson Nano

FAQ

Question:What are the account and password in the image programmed in the SD card?

 Answer:

In general, only if the customer has a remark in advance and needs to help burn the image, the image will be pre-burned in the SD card purchased by the customer. The user name and password of the image are waveshare.

{{{3}}}

{{{4}}}

{{{5}}}

Question:How to connect the DC power?

 Answer:

Please use the jumper cap to short-circuit the J48, and then you can directly use the DC power to insert the circular power interface.

{{{3}}}

{{{4}}}

{{{5}}}

Question:After the image is programmed normally, the Jetson Nano can be powered on normally, but the HDMI does not display?

 Answer:

1. The Jetson Nano Developer Kit supports HDMI and DP interface output. If you use the HDMI to other interface connection methods, there may be compatibility problems. It is necessary to switch to the screen of the HDMI interface or the screen test of the DP interface.
2. The Jetson Nano Developer Kit (B01) version can only use the image of JetPack 4.3 or later. It may be that the image version you are using is too old. You need to go to NVIDIA's Jetson download center, download the latest Jetson nano image, and re-burn the image.

{{{3}}}

{{{4}}}

{{{5}}}

Question:After flashing the image of Jetson Nano, the TF card cannot be recognized on a Windows computer?

 Answer:

Due to the partition problem, the TF card with the image of the Jetson Nano programmed cannot recognize the drive letter normally on the Windows computer. If you need to reformat it, search for Disk Management in the search bar of Windows and open the Disk Management interface. Find the mobile disk where the TF card is located (be careful not to mistake it for another disk), right-click and select Delete Volume, then create a new volume and format it by default. After the default format, the drive letter of TF will be recognized again. At this time, the space and memory of the TF card are incorrect. Note that you need to use the formatting software to quickly format the new drive letter again. After formatting, if the memory space of the TF card is normal, the new image can be re-programmed normally.

{{{3}}}

{{{4}}}

{{{5}}}

Question:Why doesn't the board be powered by the DC power adapter?

 Answer:

Please short the J48 pins with the provided jumper and test it again, Note that the jumper attaches to one of the J48 pins.

{{{3}}}

{{{4}}}

{{{5}}}

Question:The display cannot work after booting?

 Answer:

Please check if you have connected the display tightly, and please use HDMI or DP display. And please use the newest image and test it again.

{{{3}}}

{{{4}}}

{{{5}}}

Question: Why the default image installed the eMMC does not include CUDA?

 Answer:

You need to set the OS to boot from the SD card by modifying the dtb first and changing the boot order.
After that, you can install the jetpack SDK in the nano by command directly.
Please check this guide to enable the SD card first.

http://note.youdao.com/noteshare?id=40f16617360e371a7ea2031473f9901f&sub=AB18484C67224E7DBEAF8D173DDA7B21 

{{{5}}}

Support

Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)

Submit Now