Uninterruptible Power Supply Module, Supports charging And Power output at the same time, 3S & 5V 5A Output
Power / Relays / SCR, Power Supply

Uninterruptible Power Supply Module, Supports charging And Power output at the same time, 3S & 5V 5A Output

$21.99
Power plug
USUKEU
Share:
Description

Details

Uninterruptible Power Supply (UPS) Module, Supports charging And Power output at the same time, 3S & 5V 5A Output
Uninterruptible Power Supply Module 3S

Supports charging and power output at the same time, 3S * & 5V 5A output

* 3S indicates that powered by 3x 18650 Li batteries in series, the output range is about 9V~12.6V

SAFETY CAUTIONS

  • Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they're not properly recharged or used.
  • Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery.
  • Do not mix use old batteries with new ones, avoid using batteries of different brands.
  • When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.
  • Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.
  • Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.
Features at a glance
  • Adapting various interfaces via cables, easy to integrate into mobile robots or industrial control equipment
  • I2C bus communication, monitoring the batteries voltage, current, power in real time
  • Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
  • Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi and Jetson Nano
  • Batteries warning indicators, easy to check if the battery is connected correctly
  • Comes with online development resources and manual

Specifications
Output voltage Batteries series voltage; 5V 5A; 3.3V 300mA
Control interface I2C
Battery support 3 x 18650 Li batteries (in series, NOT included)
Charger 12.6V 2A
Dimensions 60 × 93mm
Mounting hole size 3.0mm

suitable for Raspberry Pi series

Connecting with Raspberry Pi 5

Connecting with Raspberry Pi 4B

* for reference only, please refer to the Package Content for detailed part list


Uninterruptible Power

It is able to charge the batteries and provide power output at the same time from external power supply
Automatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble





Real time monitoring

monitoring the batteries voltage, current and power via I2C

for reference only, the Raspberry Pi 4B and the batteries are NOT included.

Safe and stable circuit design

Protection circuits for over charge/discharge, over current, short circuit, and reverse
along with the equalizing charge feature, more safe and stable



Adapting various interfaces via cables

Easy to integrate into mobile robots or industrial control equipment




Battery warning indicators

easy to check if the battery is connected correctly


Interface Definition

What's On Board

Chips

  1. S-8254AA
    Li battery protection
  2. SY8286
    5V voltage regulator
  3. HY2213
    Equalizing charge
  4. INA219
    Voltage/current monitoring
  5. RT9193
    3.3V voltage regulator
  6. NDC7002N
    Voltage translator

Others

  1. AO4407A
    Battery protection MOS tube
  2. Power port
    12.6 2A power input
  3. Power output switch
  4. Batteries series power output
  5. 5V power output
  6. Reverse warning indicators
  7. Multi-functional expansion header
  8. I2C level selection
    3.3V (default) / 5V

Easy To Install


Product Show

Outline dimensions
Resources & Services

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.


Selection guide
ModelDevice SupportBattery Supportfeature

Pico-UPS-A		 Raspberry Pi Pico 14500 Li-ion battery (NOT included) Provides power supply via pin header

Pico-UPS-B		 600mAh 3.7V Li-po battery Provides power supply via pin header

UPS HAT (C)		 Raspberry Pi Zero 803040 Li-po battery 1000mAh 3.7V Provides power supply via Pogo pins

Li-ion Battery HAT		 14500 Li-ion battery (NOT included) UPS not supported

UPS HAT (B)		 Raspberry Pi 5/4B/3B+ 18650 Li battery × 2 (NOT included), up to 5A output current, with 8.4V battery charger Provides power supply via Pogo pins, with 5V USB output

UPS HAT (E)		 21700 Li battery × 4 (in series, NOT included), up to 5V 6A output current, 40W bi-directional fast charging Type-C port Provides power supply via Pogo pins, with 5V USB output

UPS HAT		 Raspberry Pi 4B/3B+ 18650 Li battery × 2 (NOT included), up to 2.5A output current, with 8.4V battery charger Provides power supply via pin header, with 5V USB output

UPS HAT (D)		 21700 Li battery × 2 (in parallel, NOT included), up to 2.5A output current, with 5V Type-C port battery charger Provides power supply via Pogo pins, with 5V USB output

Li-polymer Battery HAT		 3.7V 3000mAh 104060 Li-polymer battery, up to 2A output current Provides power supply via pin header, UPS not supported

UPS Power Module		 Jetson Nano 18650 Li battery × 4 (NOT included), up to 2.5A output current, with 8.4V battery charger Provides power supply via 6PIN cable, with OLED screen

UPS Power Module (B)		 18650 Li battery × 4 (NOT included), up to 5A output current, with 8.4V battery charger Provides power supply via Pogo pins

UPS Module 3S		 Suitable for the devices with Type-C power port 18650 Li battery × 3 (in series, NOT included), up to 5V 5A output, with 12.6V battery charger Adapting various interfaces via cables

UPS Module Mini		 Suitable for CM4-IO-WIRELESS-BASE-B base board, etc. 10440 Lithium battery × 3 (in parallel, NOT included), up to 5V 2.5A output Provides power supply via pads or pin header

Quick Overview

  • The 18650 batteries are NOT included
  • Please note that the battery length SHOULD be less than 67mm, some batteries with protection plate in the market are NOT supported, learn more
  1. UPS Module 3S x1
  2. XH2.54 male self lock button switch ~15cm ×1
  3. XH2.54 male to DC5521 female cable ~15cm x1
  4. XH2.54 dual connector cable ~15cm ×1
  5. XH2.54 male to Type-C cable ~20cm x1
  6. Acrylic protection panels x1
  7. Screws pack ×1
  8. OPTIONS 12.6V 2A Battery Charger x1