- Description
- Package Content
Details
Supports Charging and Power Output At the Same Time, Stable 5V Output
- Mini UPS expansion board for easy soldering or integration into mobile robots and industrial control equipments
- I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
- Onboard multiple function pins, provides two charging and discharging methods via pads and pin headers
- Multiple battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
- Onboard 5V regulator, up to 2.5A continuous output current
- Onboard warning indicators, easy to check if the battery is connected correctly and charging status
- Comes with online development resources and manual
Output voltage | 5V 2.5A |
---|---|
Charger | Support 5V 3A |
Control bus | I2C |
Battery support | 10440 Lithium battery × 3 (in parallel, NOT included) |
Dimensions | 61 × 38mm |
It is able to charge the batteries and provide power output at the same time from external power supply
Automatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble
monitoring the batteries voltage, current, power, and remaining capacity via I2C interface
for reference only, please refer to the part list for detailed package content
Protection circuits for over charge/discharge, over current, short circuit, and reverse
along with the equalizing charge feature, more safe and stable
- ETA1188
5V voltage regulator - ETA6953
Battery charge/discharge chip - INA219
Voltage/current monitoring chip - S8261
Battery protection chip - RT9193
3.3V voltage regulator - AO4402
Battery protection MOS tube - UPS ON/OFF switch
Control UPS output
- Boot button
Batteries activation - Power indicator
Lights up when the UPS switch is turned on - Charge indicator
Light up: when batteries are charging
Blinking: when batteries are abnormal or no battery connected
Light off: when charging completed or not charging - Reverse warning indicators
will light up if the related battery is reversely connected - Charging pad
5V 3A - UPS output pad
5V 2.5A - Multi-functional pin headers
IN | Power input (5V 3A) |
---|---|
OUT | UPS output (5V 2.5A) |
GND | ground |
UPS OFF | turn off UPS power output when connected to PWR pin |
BOOT | Batteries activation (pull low for 500ms and then pull high) |
CHARGE | Charge indication (low level indicates charging) |
SCL | I2C clock |
SDA | I2C data |
PWR | UPS ON/OFF (In the case of the onboard UPS switch being off, the UPS power output will be turned off when PWR is connected to the UPS OFF pin, and will be turned on when connected to the GND pin) |
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
SAFETY CAUTIONS
- Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they're not properly recharged or used.
- Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery.
- Do not mix use old batteries with new ones, avoid using batteries of different brands.
- When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.
- Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.
- Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.
Model | Device Support | Battery Support | feature |
---|---|---|---|
Pico-UPS-A |
Raspberry Pi Pico | 14500 Li-ion battery (NOT included) | Provides power supply via pin header |
Pico-UPS-B |
600mAh 3.7V Li-po battery | Provides power supply via pin header | |
UPS HAT (C) |
Raspberry Pi Zero | 803040 Li-po battery 1000mAh 3.7V | Provides power supply via Pogo pins |
Li-ion Battery HAT |
14500 Li-ion battery (NOT included) | UPS not supported | |
UPS HAT (B) |
Raspberry Pi 5/4B/3B+ | 18650 Li battery × 2 (NOT included), up to 5A output current, with 8.4V battery charger | Provides power supply via Pogo pins, with 5V USB output |
UPS HAT (E) |
21700 Li battery × 4 (in series, NOT included), up to 5V 6A output current, 40W bi-directional fast charging Type-C port | Provides power supply via Pogo pins, with 5V USB output | |
UPS HAT |
Raspberry Pi 4B/3B+ | 18650 Li battery × 2 (NOT included), up to 2.5A output current, with 8.4V battery charger | Provides power supply via pin header, with 5V USB output |
UPS HAT (D) |
21700 Li battery × 2 (in parallel, NOT included), up to 2.5A output current, with 5V Type-C port battery charger | Provides power supply via Pogo pins, with 5V USB output | |
Li-polymer Battery HAT |
3.7V 3000mAh 104060 Li-polymer battery, up to 2A output current | Provides power supply via pin header, UPS not supported | |
UPS Power Module |
Jetson Nano | 18650 Li battery × 4 (NOT included), up to 2.5A output current, with 8.4V battery charger | Provides power supply via 6PIN cable, with OLED screen |
UPS Power Module (B) |
18650 Li battery × 4 (NOT included), up to 5A output current, with 8.4V battery charger | Provides power supply via Pogo pins | |
UPS Module 3S |
Suitable for the devices with Type-C power port | 18650 Li battery × 3 (in series, NOT included), up to 5V 5A output, with 12.6V battery charger | Adapting various interfaces via cables |
UPS Module Mini |
Suitable for CM4-IO-WIRELESS-BASE-B base board, etc. | 10440 Lithium battery × 3 (in parallel, NOT included), up to 5V 2.5A output | Provides power supply via pads or pin header |
Weight: 0.023 kg
Quick Overview
UPS Module Mini x1