Details
Nano Base Board (A) for Raspberry Pi Compute Module 5, Same Size As The CM5
Nano Base Board (A) for CM5
Suitable For Evaluating The Raspberry Pi CM5 Or Being Integrated Into End Products
Base Board for Compute Module 5 Lite / eMMC
Same Size As The CM5
Compact size and fully functional, With Multiple Peripheral Interfaces, Suitable for Narrow Application Environments
Note: the CM5 is NOT included. Please buy it separately.
Specifications
| CM5 socket | suitable for all variants of Compute Module 5 |
|---|---|
| Connector | Raspberry Pi 40PIN GPIO interface × 1 |
| USB | USB 3.2 Gen1 Type A port × 1 |
| MIPI | MIPI 4-lane interface × 2 (22pin 0.5mm FPC connector) |
| Storage | TF card socket for Compute Module 5 Lite (without eMMC) variants |
| Power input | 5V |
| Dimensions | 55 × 40mm |
What's On Board
- CM5 socket
suitable for all variants of Compute Module 5 - USB port
USB 3.2 Gen1 high speed interface, for connecting sorts of USB devices - TF card slot
for connecting a TF card with pre-burnt image (Lite variant ONLY) - Power supply / Programming
5V power supply, or used for eMMC burning - FAN header
4PIN JST-SH PWM fan header for connecting a cooling fan - PSW button
power button - BOOT button
Press before powering on and release after powering on to enter the burning mode
- 2PIN JST-SH RTC battery header
- 40PIN GPIO interface
suitable for connecting to various HAT modules - Dual MIPI interfaces
for connecting to DSI displays or CSI cameras - Special function pins
CM5 core power enable and ETH SYNC signal - IO-VREF selection
CM5 IO logic level: 3.3V or 1.8V - Function enable pins
Enabled by default, can be disabled by shorting the corresponding pads - Dual-color LED indicator
Red light: Raspberry Pi power indicator
Green light: Raspberry Pi working status indicator
Outline dimensions
About Compute Module 5
Newly upgraded, more powerful
- Upgraded processor BCM2712, quad-core Cortex-A76 64-bit SoC, more powerful performance
- More options for RAM (2GB / 4GB / 8GB / 16GB)
- More options for eMMC Flash (0GB (Lite) / 8GB / 16GB / 32GB / 64GB)
- Faster eMMC Flash storage, up to 200 Mbps data rate
- Optional for certified radio module, supports either PCB trace antenna or external antenna, more suitable for industrial applications
- Adopts B to B connectors, most compatible with Compute Module 4
- Onboard Gigabit Ethernet PHY supporting IEEE1588, suitable for network applications
- Onboard PCIe Gen 2 x1 interface, allows connecting more useful modules
Resources & Services
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
What's the differences
| CM5 Base Board | Interface count and specifications | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PoE | Gigabit ETH | 40PIN GPIO | PCIe | USB① | MIPI | HDMI | RTC | Fan Header② | Power Input | Features | ||
 NANO A |
√ | 3.0×1 | ×2 | SH1.0 | √ | 5V | CM5 sized | |||||
 mini Base A |
×1 | √ | 16PIN PCIe | 3.0×2 2.0×2 |
×2 | ×2 | ML/CR1220 | √ | 5V | mini size | ||
 PoE Base |
√ | ×1 | √ | M.2 M | 3.0×2 2.0×2 |
×2 | ×2 | ML/CR1220 | √ | 5V | USB×4 | |
 Raspberry Pi official |
③ | ×1 | √ | M.2 M | 3.0×2 | ×2 | ×2 | ML/CR1220 | √ | 5V | Official IO base board | |
| Note | ① USB 3.0 is equivalent to USB 3.2 Gen1. ② Unless otherwise specified, the Fan header usually is JST-SH type connector. ③ There's PoE header only on the Raspberry Pi official IO board without PoE circuit, which means additional PoE module is required for the official IO board to enable PoE feature. Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A). |
|||||||||||
Weight: 0.015 kg
Quick Overview
- CM5-NANO-A x1
- 2*20PIN color-coded straight pinheader x1
1
2
