Mini Dual Gigabit Ethernet Base Board / Mini-Computer Kit Designed for Raspberry Pi Compute Module 5 (NOT Included), For All Variants Of CM5

$23.99 - $43.99

Version Options

the Base Board + Metal Case + Power Supply the Base Board only

Power Plug

EU None UK US

Details

Mini Dual Gigabit Ethernet Base Board / Mini-Computer Kit Designed for Raspberry Pi Compute Module 5 (NOT Included), For All Variants Of CM5

Dual Gigabit Ethernet Base Board For CM5

Mini, Practical And Neat

Suitable For Evaluating The Raspberry Pi CM5 Or Being Integrated Into End Products

Version Options

* Please refer to the Package Content for detailed part list

CM5-DUAL-ETH-MINI
the dual Gigabit Ethernet base board only

CM5-DUAL-ETH-MINI-BOX
In addition to the dual Gigabit Ethernet base board, it is equipped with Aluminum Alloy case and 27W power supply

Optional Black Metal Case

Provides better protection for the base board along with efficient heat dissipation

for reference only, CM5 is NOT included.

Specifications

CM5 socket	suitable for all variants of Compute Module 5
Networking	Dual Gigabit Ethernet RJ45 connectors
USB	USB 3.0 port
PIN HEADER	Raspberry Pi 40PIN GPIO header
Storage	TF card socket for Compute Module 5 Lite (without eMMC) variants
Fan header	4-wire SH1.0 port, allows speed adjustment and measurement, 5V
Power input	5V, Type-C interface
Dimensions	the base board: 55.0 × 68.0mm
Dimensions	with metal case: 61.0 × 75.0 × 27.5mm

What's the differences

CM5 Base Board	Interface count and specifications
CM5 Base Board	PoE	Gigabit ETH	40PIN GPIO	PCIe	USB①	MIPI	HDMI	RTC	Fan Header②	Power Input	Features
NANO A			√		3.0×1	×2		SH1.0	√	5V	CM5 sized
NANO B		×1	√	16PIN PCIe	3.0×1	×2	√	SH1.0	√	5V	CM5 sized
mini Base A		×1	√	16PIN PCIe	3.0×2 2.0×2	×2	×2	ML/CR1220	√	5V	mini size
mini Base B		×1	√	M.2 M KEY	3.0×2 2.0×2	×2	×2	ML/CR1220	√	5V	mini size, onboard EEPROM and encryption chip
Mini Dual Gigabit		×2	√		3.0×1			SH1.0	√	5V	dual ETH
PoE Base	√	×1	√	M.2 M	3.0×2 2.0×2	×2	×2	ML/CR1220	√	5V	USB×4
Raspberry Pi official	③	×1	√	M.2 M	3.0×2	×2	×2	ML/CR1220	√	5V	Official IO base board
Note	① USB 3.0 is equivalent to USB 3.2 Gen1. ② Unless otherwise specified, the Fan header usually is JST-SH type connector. ③ There's PoE header only on the Raspberry Pi official IO board without PoE circuit, which means additional PoE module is required for the official IO board to enable PoE feature. Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A).

Connecting with Compute Module 5

standard CM5 socket and 40PIN GPIO header
suitable for Compute Module 5 Lite/eMMC series module

for reference only, CM5 is NOT included.

Precise cut-out with clear label

each cut-out is completely aligned with the connector

Comes with anti-slip rubber (unassembled)
PSW button, for system power ON/OFF control without frequent plugging and unplugging of the power supply
Antenna connector, for connecting antenna to build a wireless router

Magnetic Design

Adopts Magnetic removable top with location columns, easy to fix and
better protection for the GPIO pins

Heat Dissipation Design

Metal case for large area thermal conductivity and heat dissipation
Combined with heatsink fins for more efficient cooling

Application example

Suitable for Raspberry Pi or other industrial occasions with special function requirements

Assembly Guide

1. Remove the bottom screws then the bottom panel.

2. Gently push the Ethernet port and take out the CM5 mini base board.

3. Paste the thermal tapes on the front and back sides of the CM5, then install the CM5 to the base board

4. Install the base board to the metal case, fix the bottom panel, then insert the TF card and power on.

for reference only, CM5 is NOT included.

What's On Board

40PIN GPIO header
for connecting sorts of HAT
CM5 socket
suitable for all variants of Compute Module 5
PSW button
BOOT button
RTC battery header
for connecting rechargeable RTC battery
FAN header
for connecting cooling fan, allows speed adjustment and measurement
RJ45 Gigabit Ethernet ports
Dual RJ45 Gigabit Ethernet ports, 10/100/1000M compatible
ETHERNET 0: CM5 original network port
ETHERNET 1: PCIe extended network port

USB3.2 Gen1 Type-A port
for connecting sorts of USB devices
Type-C port
5V power supply, or used for eMMC programming
TF card slot
for connecting a TF card with pre-burnt image (Lite variant ONLY)
RTL8111H
Gigabit NIC chip
SYSTEM switch
EEPROM_WP: Prevent EEPROM from being overwritten
WiFi_DIS: WiFi disabled, only for CM5 versions with wireless
BT_DIS: Bluetooth disabled, only for CM5 versions with wireless
Indicators
Red light: indicating the power supply status of Raspberry Pi
Green light: indicating the working status of Raspberry Pi

Outline dimensions

About Compute Module 5

Newly upgraded, more powerful

Upgraded processor BCM2712, quad-core Cortex-A76 64-bit SoC, more powerful performance
More options for RAM (2GB / 4GB / 8GB / 16GB)
More options for eMMC Flash (0GB (Lite) / 8GB / 16GB / 32GB / 64GB)
Faster eMMC Flash storage, up to 200 Mbps data rate
Optional for certified radio module, supports either PCB trace antenna or external antenna, more suitable for industrial applications
Adopts B to B connectors, most compatible with Compute Module 4
Onboard Gigabit Ethernet PHY supporting IEEE1588, suitable for network applications
Onboard PCIe Gen 2 x1 interface, allows connecting more useful modules