ESP32-C6 1.9inch Display Development Board, 170×320 Pixels, 262K Color, 160MHz Running Frequency RISC-V Single-core Processor, WiFi 6 & Bluetooth, Optional For Touch Function, ESP32 With Display

SKU:30937
Part No.:ESP32-C6-LCD-1.9
Brand:Waveshare

$15.99
PriceQuantity
1
$15.592
$15.393
$15.314+

Details

ESP32-C6 1.9inch Display Development Board, 170×320 Pixels, 262K Color, 160MHz Running Frequency RISC-V Single-core Processor, WiFi 6 & Bluetooth, Supports 90° Hardware Rotation, Optional For Touch Function, ESP32 With Display
ESP32-C6 1.9inch LCD Display
Development Board

170 × 320, Embedded with ST7789V2 Display Driver, Supports 90° Hardware Rotation

ESP32-C6 Touch LCD 1.9, front view and features
Version options
ESP32-C6-LCD-1.9

ESP32-C6-LCD-1.9
without touch control

ESP32-C6-Touch-LCD-1.9

ESP32-C6-Touch-LCD-1.9
with touch control


Features

This product adopts ESP32-C6FH8 chip with 2.4GHz Wi-Fi 6 and Bluetooth BLE 5 support, integrates 8MB Flash. Onboard 1.9inch LCD display which can smoothly run GUI programs such as LVGL. Onboard QMI8658 6-axis IMU, TF card slot, Lithium battery header, etc. Compatible with Pico header, offering strong compatibility and expandability. It is suitable for the quick development of the HMI and other ESP32-C6 applications.

  • Equipped with a high-performance 32-bit RISC-V processor with clock speed up to 160 MHz
  • Supports 2.4GHz Wi-Fi 6 (802.11 b/g/n) and Bluetooth 5 (LE), with an onboard antenna
  • Built-in 512KB HP SRAM, 16KB LP SRAM, and 320KB ROM, integrates 8MB Flash
  • Onboard 1.9inch LCD display, 170 × 320 resolution, 262K color, delivering clear and vivid color image display
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.
  • Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use
  • Onboard 3.7V MX1.25 Lithium battery recharge/discharge header
  • Onboard TF card slot for external TF card storage of pictures or files
  • Compatible with Pico header, onboard multiple peripheral interfaces, offering strong compatibility and expandability


LCD parameters
Display Panel LCD Display Size 1.9 inch
Resolution 170×320 Display Colors 262K
Brightness 500 cd/㎡ Contrast Ratio 900:1
Communication Interface SPI Driver IC ST7789V2
Touch Supported (Touch Version Only) Touch IC CST816 (Touch Version Only)

Application Scenarios
ESP32-C6 Touch LCD 1.9, application scenarios
Supports ESP-IDF, Arduino IDE

Comprehensive SDK, dev resources, tutorials to help you easily get started

ESP32-C6 Touch LCD 1.9, supports ESP-IDF ESP32-C6 Touch LCD 1.9, supports Arduino

Wi-Fi 6 and BLE 5 support

ESP32-C6 integrates 2.4 GHz Wi-Fi 6 (802.11 ax/b/g/n) with 40 MHz bandwidth support. Its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh

ESP32-C6 Touch LCD 1.9, with Wi-Fi 6 and BLE 5 support
interface definition

Compatible with Pico header, can be used with some Raspberry Pi Pico HATs, offering strong compatibility and expandability

ESP32-C6 LCD 1.9, interface definition ESP32-C6 LCD 1.9, display pin definition ESP32-C6 Touch LCD 1.9, touch control pin definition

What's On Board
ESP32-C6 Touch LCD 1.9, onboard components
  1. ESP32-C6FH8
    integrates 8MB Flash, up to 160MHz operating frequency
  2. TCA9554
    8-ch GPIO expander chip, enhances IO flexibility
  3. MX1.25 battery header
    MX1.25 2PIN connector, for 3.7V Lithium battery, supports charging and discharging
  4. RESET button
  5. USB Type-C port
    for power input and data transmission
  6. TF card slot (on the back side)
    Supports TF card for extended storage
  7. Charge indicator
    Lithium battery charge indicator, lights up when charging, off when fully charged
  1. BOOT button
    for downloading program or entering boot mode
  2. WS2812 RGB LED (for non-touch version only)
    for colorful lighting effects, on the back side of the PCB
  3. QMI8658 sensor (on the back side)
    6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer
  4. IPEX1 connector (for touch version only)
    Switching to use external antenna via resoldering an onboard resistor
  5. Onboard ceramic antenna
    Onboard antenna design for space saving and signal stability


outline dimensions

without touch version

ESP32-C6 LCD 1.9, outline dimensions

with touch version

ESP32-C6 Touch LCD 1.9, outline dimensions
Resources & Services
resources and services
ESP32 LCD Selection
Modeldisplayonboard resourcesPeripheral interfaces
pixelsInterfaceDisplayTouchIMURTCTFBuzzerSpeakermicbattery
header
antenna
AMOLED display

ESP32-S3-Touch-AMOLED-2.41
600 × 450 QSPI RM690B0 FT6336 - - - I2C, UART, USB, 34PIN GPIO header

ESP32-S3-Touch-AMOLED-2.41-B
600 × 450 QSPI RM690B0 FT6336 - - - I2C, UART, USB, 34PIN GPIO header, with case

ESP32-S3-Touch-AMOLED-1.91
240 × 536 QSPI RM67162 FT3168 - - - - 40PIN header

ESP32-S3-AMOLED-1.91
240 × 536 QSPI RM67162 - - - - - 40PIN header

ESP32-S3-Touch-AMOLED-1.8
368 × 448 QSPI SH8601 FT3168 - I2C, UART, GPIO pads

ESP32-S3-Touch-AMOLED-1.43
466 × 466 QSPI SH8601/C05300 FT3168 - - - I2C, UART, USB, 2 × 14PIN headers

ESP32-S3-Touch-AMOLED-1.43-B
466 × 466 QSPI SH8601/C05300 FT3168 - - - I2C, UART, USB, 2 × 14PIN headers
LCD display

ESP32-S3-Touch-LCD-3.5
320 × 480 SPI ST7789 FT6336 - 2 × SH1.0 12PIN GPIO header, camera interface

ESP32-S3-Touch-LCD-2.8
240 × 320 SPI ST7789 CST328 - - I2C, UART, SH1.0 12PIN header

ESP32-S3-LCD-2.8
240 × 320 SPI ST7789 - - - I2C, UART, SH1.0 12PIN header

ESP32-S3-LCD-2.8B
480 × 640 SPI ST7701 - - - 20PIN header

ESP32-S3-Touch-LCD-2.8B
480 × 640 SPI ST7701 GT911 - - 20PIN header

ESP32-S3-LCD-2.8C
480 × 480 RGB ST7701 - - - I2C, UART, SH1.0 12PIN header

ESP32-S3-Touch-LCD-2.8C
480 × 480 RGB ST7701 GT911 - - I2C, UART, SH1.0 12PIN header

ESP32-S3-Touch-LCD-2.1
480 × 480 RGB ST7701 CST820 - - I2C, UART, SH1.0 12PIN header

ESP32-S3-Touch-LCD-2.1B
480 × 480 RGB ST7701 CST820 - - I2C, UART, SH1.0 12PIN header

ESP32-S3-Touch-LCD-2
240 × 320 SPI ST7789T3 CST816 - - - - 28PIN header, camera interface

ESP32-S3-LCD-2
240 × 320 SPI ST7789T3 - - - - - 28PIN header, camera interface

ESP32-S3-LCD-1.9
170 × 320 SPI ST7789 - - - - - 40PIN header, compatible with Pico header

ESP32-S3-Touch-LCD-1.9
170 × 320 SPI ST7789 CST816 - - - - 40PIN header, compatible with Pico header

ESP32-C6-LCD-1.9
170 × 320 SPI ST7789 - - - - - 40PIN header, compatible with Pico header

ESP32-C6-Touch-LCD-1.9
170 × 320 SPI ST7789 CST816 - - - - 40PIN header, compatible with Pico header

ESP32-S3-Touch-LCD-1.85C
360 × 360 QSPI ST77916 CST816 - - I2C, UART, 2×14PIN header (1.27mm pitch)

ESP32-S3-Touch-LCD-1.85C-BOX
360 × 360 QSPI ST77916 CST816 - - I2C, UART, 2×14PIN header (1.27mm pitch)

ESP32-S3-Touch-LCD-1.85
360 × 360 QSPI ST77916 CST816 - I2C, UART, GPIO pads

ESP32-S3-LCD-1.85
360 × 360 QSPI ST77916 - - I2C, UART, GPIO pads

ESP32-S3-Touch-LCD-1.69
240 × 280 SPI ST7789 CST816 - - - I2C, UART, GPIO pads

ESP32-S3-LCD-1.69
240 × 280 SPI ST7789 - - - - SH1.0 12PIN header

ESP32-S3-LCD-1.47
172 × 320 SPI ST7789 - - - - - - - 18PIN header

ESP32-C6-LCD-1.47
172 × 320 SPI ST7789 - - - - - - - 18PIN header

ESP32-S3-Touch-LCD-1.46B
412 × 412 QSPI SPD2010 SPD2010 - 20pin GPIO header

ESP32-S3-Touch-LCD-1.46
412 × 412 QSPI SPD2010 SPD2010 - 20pin GPIO header

ESP32-S3-LCD-1.3
240 × 240 SPI ST7789 - - - - - 2.54mm 13PIN header

ESP32-S3-LCD-1.3-B
240 × 240 SPI ST7789 - - - - - 2.54mm 13PIN header, with case

ESP32-S3-LCD-1.3-C
240 × 240 SPI ST7789 - - - - - 2.54mm 13PIN header, with case and prism cube

ESP32-S3-Touch-LCD-1.28
240 × 240 SPI GC9A01A CST816 - - - - - SH1.0 12PIN header

ESP32-S3-LCD-1.28
240 × 240 SPI GC9A01A - - - - - - 2 × 20PIN header (1.27mm pitch)

ESP32-C3-LCD-0.71
160 × 160 SPI GC9D01 - - - - - - - 12PIN GPIO pads

ESP32-S3-GEEK
240 × 135 SPI GC9A01A - - - - - - - I2C, UART, GPIO

Weight: 0.014 kg

Quick Overview

ESP32-C6-LCD-1.9

ESP32-C6-LCD-1.9 x1

ESP32-C6-LCD-1.9

ESP32-C6-Touch-LCD-1.9

ESP32-C6-Touch-LCD-1.9 x1

ESP32-C6-Touch-LCD-1.9