The most basic kit, comes with two additional adapters, allows the Zero to connect more different devices via standard HDMI port or USB-A port.

The starter kit for newbies, comes with 16GB micro SD card for storaging and running the OS, also includes the adapters in Package A for connecting more different devices, together with a classic Raspberry Pi official red/white case, nice-looking and practical.

This is a vision kit, includes the official Raspberry Pi Zero-specific 5MP mini camera, make it easy to play around with the picture captureing or video recording functions by using Raspberry Pi.

Raspberry Pi Zero Camera overview:

• 5MP sensor, 2592 × 1944 still picture resolution
• 1/4inch CMOS, F2.8 aperture, 3.21mm focal length, 69.8° FoV
• Support 1080p30, 720p60 and 640x480p60/90 video record

This is a USB HUB kit for Raspberry Pi Zero 2 W, extending 4x USB ports, the pogo pin design allows the HUB HAT to be direct connected with Zero, and the combination can be stuffed into the dedicated red/white case to build a mini computer, keeping the dust away from your lovely Zero.

USB-HUB-BOX overview:

• Pogo pin design for the HAT, compatible with Zero / Zero 2 W
• 4x extended USB ports, USB 2.0 / 1.1 compliant
• Quality ABS material, dull polish surface, anti-fingerprint; Angle rounded design, smooth hand feeling, "simple snap" case lid
• Comes with two different lids, changing as you like
• for more info, click: USB-HUB-BOX

This is also a USB HUB kit with RJ45 Ethernet connection enabled, extending 3x USB ports. If your project happens to be Ethernet required and needs more USB ports, this kit just fits.

ETH-USB-HUB-BOX overview:

• Pogo pin design for the HAT, compatible with Zero / Zero 2 W
• 3x extended USB ports, USB 2.0 / 1.1 compliant
• Incorporates RTL8152B Ethernet chip, supports 1x RJ45 Ethernet port, 10/100M auto-negotiation
• Quality ABS material, dull polish surface, anti-fingerprint; Angle rounded design, smooth hand feeling, "simple snap" case lid
• Comes with two different lids, changing as you like
• for more info, click: ETH-USB-HUB-BOX

Package F is essentially the upgraded version of Package E, it features the additional PoE (Power over Ethernet) function, which makes it possible to power the Raspberry Pi through Ethernet connection. That is the reason why there's no extra power supply in the kit, and the size is pretty much taller to squeeze into more necessary components.

PoE-ETH-USB-HUB-BOX overview:

• Pogo pin design for the HAT, compatible with Zero / Zero 2 W
• 3x extended USB ports, USB 2.0 / 1.1 compliant
• Incorporates RTL8152B Ethernet chip, supports 1x RJ45 Ethernet port, 10/100M auto-negotiation
• PoE (Power over Ethernet) feature, 802.3af-compliant
• Quality ABS material, dull polish surface, anti-fingerprint; Angle rounded design, smooth hand feeling, "simple snap" case lid
• Comes with two different lids, changing as you like
• for more info, click: PoE-ETH-USB-HUB-BOX

Package G consists of a UPS HAT and an LCD display, it is a solution that allows the Raspberry Pi Zero to work with portable projects. Recharge the battery, and take it anywhere you go. Surely you can recharge it and run the Raspberry Pi at the same time, there're multi battery protection circuits on the UPS HAT to ensure stable and safe operation. Recharge it anytime you need.

1.3inch IPS LCD overview:

• Standard Raspberry Pi 40PIN GPIO extension header, direct connect with Zero via soldered pinheader
• 1.3″ IPS display, 240 × 240 pixels, 65K colorful, SPI communication
• 1x joystick, 3x pushbuttons, handy and useful
• for more info, click: 1.3inch LCD HAT

UPS HAT overview:

• Incorporates 1000mAh 3.7V 803040 Li-po battery, with voltage boost chip, providing regulated 5V power output
• Spring pogo pin connection design, no more messy wiring
• Li-po battery recharge chip, with dynamic path management, more stable power supply
• I2C bus communication, monitoring the battery voltage, current, power, and remaining capacity in real time
• for more info, click: UPS HAT (C)

This is an EINK display kit, isn't it a nice idea to attach the Zero on the back of the e-paper to build a tiny EINK monitor? Put the little one on your desk, for displaying weather forecast, a poem, a maxim, or a picture, so cool.

2.13inch Touch E-Paper overview:

• 2.13″ capacitive touch e-Paper display, 250×122 pixels, 5-point touch, user-defined gesture to wakeup
• 2s full refresh time, supports partial refresh
• Toughened glass panel, angle rounded design ABS case, smooth hand feeling
• for more info, click: 2.13inch Touch e-Paper HAT (with case)