3.2inch RPi LCD (B)
| ||
Overview
Introduction
3.2-inch Resistive Touch Screen TFT LCD is designed for Raspberry Pi and provides Raspbian IMG.
| More |
Features
- The hardware resolution is 320 × 240.
- Resistive touch control.
- It is compatible and can be directly inserted into any version of Raspberry Pi.
- Drivers provided (works with your own Raspbian/Ubuntu/Kali and Retropie system directly).
- Support FBCP software driver, can set the software resolution and dual-screen display.
- Immersion gold design,, fine carving.
Getting Started
Hardware Connection
- There are 40 pins on Raspberry Pi, but there are 26 pins on the LCD, so you should pay attention to connecting the pins to your Pi accordingly.
Install the touch driver
The RPi LCD can be driven in two ways: Method 1. Install the driver to your Raspbian OS. Method 2. Use the Ready-to-use image file of which the LCD driver was pre-installed.
Method 1. Driver installation
Please download the Bullseye 32bit image on the Raspberry Pi official website.
1) Download the compressed image file to the PC, and unzip it to get the .img file.
2) Connect the TF card to the PC, open the Win32DiskImager software, select the system image downloaded in step 1, and click 'Write' to write the system image. (How to write an image to a micro SD card for your Pi? See RPi Image Installation Guides for more details.)
3) Connect the TF card to the Raspberry Pi, and start the Raspberry Pi. The LCD will display after booting up, and then log in to the Raspberry Pi terminal,(You may need to connect a keyboard and HDMI LCD to Pi for driver installation, or log in remotely with SSH).
4) Then open the terminal of Raspberry Pi to install the touch driver.
git clone https://github.com/waveshare/LCD-show.git cd LCD-show/
Note: The Raspberry Pi must be connected to the network, or else the touch driver won't be successfully installed.
chmod +x LCD32-show ./LCD32-show
The touch function will work after restart. For ease of use, you can set the screen orientation, see: #Screen orientation settings.
Notes:
- 1. Executing apt-get upgrade will cause the LCD to fail to work properly. In this case, you need to edit the config.txt file in the SD card and delete this sentence: dtoverlay=ads7846.
- 2. Using Raspbian-lite, the command of the touch driver installation should be:
./LCD32-show lite
For Bullseye 64bit and Bookworm systems, you need to configure it manually: 3.2inch RPi LCD (B) Manual Configuration
Method 2. Using Ready-to-use image
The image file with the pre-installed driver is located in the IMAGE directory of the CD, or you can download it from #Image. Extract the .7z file and you will get an .img file. Write the image to your micro SD card (How to write an image to a micro SD card for your Pi? See RPi Image Installation Guides for more details). Then insert the card into your Pi, power up, and enjoy it.
Screen orientation settings
After installing the touch driver, you can modify the screen rotation direction by running the following commands.
cd LCD-show/ #X can be 0, 90, 180, and 270. Indicates that the LCD rotates 0 degrees, 90 degrees, 180 degrees, and 270 degrees, respectively. sudo ./LCD32-show X
The rotation command under Raspbian-lite is as follows:
cd LCD-show/ #X can be 0, 90, 180, and 270. Indicates that the LCD rotates 0 degrees, 90 degrees, 180 degrees, and 270 degrees, respectively. sudo ./LCD32-show lite X
Touch screen calibration
- This LCD can be calibrated with the "xinput-calibrator" demo.
- Run the following command to install:
sudo apt-get install xinput-calibrator
- Click the "Menu" button on the taskbar, choose "Preference" -> "Calibrate Touchscreen".
- Finish the touch calibration following the prompts.
- You can create a "99-calibration.conf" file at the following path to save the touch parameters (not necessary if the file exists).
/etc/X11/xorg.conf.d/99-calibration.conf
- Save the touch parameters (The following data varies due to different LCDs) to "99-calibration.conf".
Install Virtual Keyboard
1. Install matchbox-keyboard.
sudo apt-get install update sudo apt-get install matchbox-keyboard sudo nano /usr/bin/toggle-matchbox-keyboard.sh
2. Copy the statements below to toggle-matchbox-keyboard.sh and save.
#!/bin/bash #This script toggle the virtual keyboard PID=`pidof matchbox-keyboard` if [ ! -e $PID ]; then killall matchbox-keyboard else matchbox-keyboard -s 50 extended& fi
3. Execute the commands:
sudo chmod +x /usr/bin/toggle-matchbox-keyboard.sh sudo mkdir /usr/local/share/applications sudo nano /usr/local/share/applications/toggle-matchbox-keyboard.desktop
4. Copy the statements to toggle-matchbox-keyboard.desktop and save.
[Desktop Entry] Name=Toggle Matchbox Keyboard Comment=Toggle Matchbox Keyboard` Exec=toggle-matchbox-keyboard.sh Type=Application Icon=matchbox-keyboard.png Categories=Panel;Utility;MB X-MB-INPUT-MECHANSIM=True
5. Execute commands as below. Note that you need to use "Pi " user permission instead of root to execute this command.
sudo nano /etc/xdg/lxpanel/LXDE-pi/panels/panel
6. Find the statement which is similar to below: (It may be different in different versions.)
Plugin {
type = launchbar
Config {
Button {
id=lxde-screenlock.desktop
}
Button {
id=lxde-logout.desktop
}
}
7. Append these statements to add a button option:
Button {
id=/usr/local/share/applications/toggle-matchbox-keyboard.desktop
}
8. Reboot your Raspberry Pi. If the virtual keyboard is installed correctly, you can find that there is a keyboard icon on the left of the bar.
sudo reboot
Interface
| PIN NO. | SYMBOL | DESCRIPTION |
|---|---|---|
| 1, 17 | 3.3V | Power positive (3.3V power input) |
| 2, 4 | 5V | Power positive (5V power input) |
| 3, 5, 7, 8, 10, 22 | NC | NC |
| 6, 9, 14, 20, 25 | GND | Ground |
| 11 | TP_IRQ | Touch Panel interrupt, low level while the Touch Panel detects touching |
| 12 | KEY1 | button |
| 13 | RST | Reset |
| 15 | LCD_RS | Command/data register selection, low-level select command, high-level select data. |
| 16 | KEY2 | button |
| 18 | KEY3 | button |
| 19 | LCD_SI / TP_SI | LCD display/SPI data input of Touch Panel |
| 21 | TP_SO | SPI data output of Touch Panel |
| 23 | LCD_SCK / TP_SCK | LCD display/SPI clock of Touch Panel |
| 24 | LCD_CS | LCD chip selection, low active |
| 26 | TP_CS | Touch Panel chip selection, low active |
Resource
User Manual
Image
Description: if you felt hard to install the driver, try the image with the driver pre-installed.
Driver
The driver can be downloaded from github
git clone https://github.com/waveshare/LCD-show.git
Software
LCD Panel Dimension
FAQ
{{{5}}}
Since the Raspberry Pi image and version are frequently updated, if you encounter a situation where the LCD cannot be used normally, please download the latest version of the image provided by us or from the official website of Raspberry Pi and install the latest driver provided by us.
- Make sure the hardware connection is correct and the contact is good.
- Make sure that TF card programming is normal.
- When the Raspberry Pi starts normally, the PWR light is always on, and the ACT light is flashing. If it is found that both lights are always on, it may be that the TF card is not successfully programmed to the image or the TF card is in poor contact with the Raspberry Pi.
- It is recommended to use a 5V 2.5A power adapter for the Raspberry Pi. If the Raspberry Pi is powered by the USB port of the PC, the Raspberry Pi may not be able to start normally due to an insufficient power supply.
{{{5}}}
{{{5}}}
75mA.
{{{5}}}
Support
Technical Support
If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)