Details
Industrial 2.5MPa pressure transmitter, grade-A diffused silicon transducer, RS485 bus, hydraulic / barometric / oil pressure sensor
Industrial pressure transmitter
wide range input voltage, non-linear correction, high accuracy
Small Size, Easy Installation

Features at a glance
- Digital output, via RS485 (standard Modbus-RTU protocol)
- Film isolation technology, features corrosion-resistant and obstruction-proof, effectively extend the instrument lifespan
- Integrated chip, small size, easy installation, and wide range input voltage
- IP65 protection rate,cut-off frequency design, strong anti-interference capability
- Protections including: current limited, voltage limited, reverse proof (limited output current)
- Measurement accuracy up to 0.5% FS
Specifications
Measured medium | Liquid, gas (compatible with contact material) | Overload | 200% full range |
---|---|---|---|
Pressure range | 0~2.5MPa gauge pressure | Accuracy | 0.5% FS |
Power supply | 12~24V DC | Stability | ±0.2% FS/year |
Output signal | RS485 (standard Modbus-RTU protocol) | Protection rating | IP65 |
Temp. compensation | -10~70℃ | Full weight | 190±5g |
Temp. drift | ±0.2% FS/℃ (in compensation range) | Shock resistant | 10g (20~2000HZ) |
Operating environment | Medium temperature: -40~85℃ Ambient temperature: -40~85℃ Ambient humidity: 0%~95% RH (non-condensing, non-frosting) |
||
Material | Film: 316L stainless steel (contacted) Intermediate junction: 304 stainless steel (contacted) Shell: 304 stainless steel Sealing: Buna-N rubber (contacted) Hirschmann connector: ABS engineering plastics |
Digital output
using RS485 bus, standard Modbus-RTU protocol

The USB TO RS485 in the photo is NOT included.
Accurate measurement
up to 0.5%FS accuracy

High ingress protection rating
IP65 protection rating, protected from dust and low pressure water jets from any direction

Details show

Application examples

Connection example

The cable in the photo is NOT included.
Outline dimensions

Weight: 0.224 kg
Quick Overview
- WSSP08A x1
