Zero-to-CM3-Adapter
From Waveshare Wiki
| ||
Overview
Introduction
Zero 2 W to Compute Module 3 only supports Zero 2 w but not the first generation Zero.
Onboard Resource Comparison
| Zero-to-CM3-Adapter | Zero 2W |
| HDMI | HDMI |
| GPIO0~27 | GPIO0~27 |
| GPIO44, GPIO45 | GPIO44（SDA0), GPIO45（SCL0） |
| GPIO32, GPIO33 | CAM_GPIO0, CAM_GPIO1 |
| GPIO28~31, GPIO34~43 | NC |
| CSI0 | NC |
| CSI1 | CAM |
| DSI0 | NC |
| DSI1 | NC |
| USB2.0 | USB2.0 |
| SDIO | SDIO |
Onboard Resource
- Camera interface: for connecting to the CAM of zero 2w.
- USB pogo pin: used to connect the USB signal line of zero 2w.
- HDMI interface: used to connect the HDMI of zero 2w.
- Micro SD card slot adapter: used to lead out the data cable of the SD card in Zero 2 w.
- GPIO: connect to the 40Pin pin of zero 2w, and lead to GPIO0~27.
Resource
Schematic
Raspberry Pi Zero 2 W Documents
- Raspberry Pi Zero 2 W Introduction
- Raspberry Pi Zero 2 W Schematic
- Raspberry Pi Zero 2 W Dimensions
- Raspberry Pi Zero 2 W Test Introduction
- Raspberry Pi Official Link
Software
Support
Technical Support
If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)