Template: Infrared Temperature Sensor Arduino Guide

The Arduino example is written for the Arduino UNO. If you want to connect it to other Arduino boards, you may need to change the connection.

Arduino

Hardware connection

Sensor	Arduino	Description
VCC	5V	Power input
GMD	GND	Power ground
SDA	SDA	I2C data input
SCL	SCL	I2C clock pin

Examples

• Download the demo codes to your PC and unzip them.
• Install the Arduino IDE on your PC.
• Go into Infrared-Temperature-Sensor-Code/Arduino/WaveShare_MLX90614.
• Run the WaveShare_MLX90614.ino file.
• Select the correct Board and the Port.

• Build the project and upload it to the board.
• Open the serial monitor of the Arduino IDE or the SSCOM software and check the serial data.