STLINK-V3SET

STLINK-V3SET SWIM, JTAG/SWD

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

{{{name6}}}

Primary Attribute Category: {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: Website Chinese: 官网

Onboard Interfaces

Related Products

Resource

• User Manual
• STLINK-V3SET Driver
• ST Resource
• Demo video

FAQ

Question:When downloading, it prompts that there is no target board, what should I do?

 Answer:

1. Confirm that the target board has been powered on.

2. Sometimes the target board does not supply power to ST-LINK. At this time, it is necessary to short-circuit pins 2 and 19 of ST-LINK to supply power to ST-LINK.

{{{5}}}

Question:When using STLINK-V3SET, the downloader can be recognized by the keil software and the chip ID can be read, but the following error is reported?

 Answer:

Check the Keil version, which must be at least 5.25.

{{{5}}}

Question:After connecting ST-LINK to the computer, the following error is prompted: ST-LINK USB communication eror?

 Answer:

This is generally caused by firmware problems, which can be upgraded with ST-link firmware to upgrade the software.

{{{5}}}

Question:In keil, the program can be downloaded and run normally, but when debugging I get errors like the following: Cannot access Memory Error while accessing a target resyntaxhighlight. The resyntaxhighlight is perhaps not available or a wrong access was attempted. *** error 57: illegal address (0x08000000)

 Answer:

Uncheck the Download to Flash option in the Options for Target->Debug->Settings->Debug->Download Options dialog box.

{{{5}}}

Question:How to download STVP software from ST official website?

 Answer:

*Open the STVP download link:

http://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/stvp-stm32.html

• "Get Software"

• Click "Agree"

• Fill in the name and email address, check it, and click "download" to download, ST will send a link to your email, click the link, and repeat "Step 1" to download the software.

{{{5}}}

Question:ST-LINK can sometimes be downloaded, but sometimes the computer cannot recognize it and cannot download it?

 Answer:

1. If the USB port is in poor contact, try another USB port, or try another computer.
2. If the USB cable is loose and other problems, change a USB cable to test.
3. ST-LINK firmware problem, use utility to upgrade the firmware.

{{{5}}}

Support

Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)

Submit Now