STLINK-V3MINI
| ||
Introduction
The STLINK-V3MINI is stand-alone debugging and programming mini probe for STM32 microcontrollers.
The JTAG/SWD interfaces are used to communicate with any STM32 microcontroller located on an application board.
The STLINK-V3MINI also provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART.
The STLINK-V3MINI is a portable version, easy-to-use debugger/programmer including STDC14 interface with its flat cable.
| More |
User guide
Supports devices
All products of STM32 series which has JTAG/SWD interface
Hardware connection
- Connect STLINK-V3MINI to host PC
- Connect micro USB interface of STLINK-V3MINI, generally, it driver will be auto installed by ST-Link tool.
- You can check the programmer is recognized by PC
- Sometimes, the driver may not be installed properly, you can also install it manually.
- Download it from the #Resources
- Right-click ST-Link Debug, and ST-Link VCP Ctrl to update the driver.
- Connect the programmer to the target board
- Connect the STLINK-V3MINI to JTAG/SWD interface of STM32 board by adapter boards
Software setting
- Connect the programmer to the target board and power on it. If all the connections are normally, you can read the information of the target board
- Then you can compile and program target board by the STLINK-V3MINI
Resources
Support
Technical Support
If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)