Robot-Chassis-S Assembly Graphic Tutorial

We will demonstrate how to assemble the Robot-Chassis-s series smart mobile robot chassis.
Use silver metal round head screws PM3*25 through the holes on both sides of the motor.

Put the black TT motor brackets in the holes where the screws go through.
Then tighten the screws with black metal hexagonal nuts M3.

This is the effect after installing four motors.

Install each of the four motors into the assembly holes of the large-size mounting plate.

Use black metal cup head hexagonal screws M3*10 and black metal hexagonal nuts M3 to fix the motor onto the mounting plate.

So, we have completed the installation of the motors.
Next, we attach a middle-size mounting plate to the other side of this mounting plate.
Use black metal countersunk screws KM2.5*8 to fix the hexagonal standoffs M2.5*20 onto the large-size mounting plate as support.

Finally, install the wheels.
Pay attention to installing the same Mecanum wheels in the diagonal direction.

After completing the above steps, you can easily assemble the Robot-Chassis-s series smart mobile robot chassis.