Raspberry Pi Zero W Package D

From Waveshare Wiki
Jump to: navigation, search
Raspberry Pi Zero Package D
Raspeberry Pi Zero W Package D
Raspberry Pi Zero WH Package D

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

{{{name6}}}

Instroduction

The Raspberry Pi Zero is half the size of a Model A+, with twice the utility. A tiny Raspberry Pi that’s affordable enough for any project!

Note: this is the original Pi Zero V1.3, for the new version with built-in WiFi, please check

Difference among Zero, Zero W, and the Zero WH

The Raspberry Pi Zero is the basic version of the Raspberry Pi Zero series without WiFi and Bluetooth functions. The Raspberry Pi WH has a wireless card featuring WiFI and Bluetooth functions. The Raspberry Pi Zero WH version has a pre-soldered 40PIN pin-header based on the Raspberry Pi W for easy use.

Parameters Comparision

Item Raspberry Pi Zero Raspberry Pi Zero W Raspberry Pi Zero WH
SoC (System on Chip) BCM2835 (CPU, GPU DSP and SDRAM)
CPI (Central Processing Unit) ARM11 single core 700MHz
Memory 512MB
USB 2.0 1x Micro USB port (supports USB HUB expansion)
Video output Supports PAL and NTSC formats, supports HDMI (1.3 and 1.4) and supports PAL and NTSC formats from 640 x 350 to 1920 x 1200.
Audio output HDMI (High Definition Multiple Audio/Video Interface)
Network Access None WIFI and Bluetooth 4.1
Extended interface 40
Power Input 5v via MicroUSB or pin
Overall size 65 × 30 x 5 mm
Operating System Debian GNU/Linux, Fedora, Arch Linux, RISC OS, etc.

Raspberry Pi Zero vs Raspberry Pi W

The Raspberry Pi W has a wireless card, which supports WiFi and Bluetooth.

Zero vs Zero W.png

USB HUB HAT

Interface

Label Description
USB HUB USB HUB interface, connect to the USB port of the Raspberry Pi
USB1-USB4 USB extended port, can connect to the USB device
USB to UART Raspberry Pi Serial Port

Hardware Connection

  • Using the Raspberry Pi Zero W as an example:
  1. Insert the module into the 40Pin GPIO interface of the ZERO, and at the same time connect the USB interface of the Zero W to the USB HUB interface of the module with the Micro USB connector.
  2. Connect the Micro USB to the USB to UART interface of the module, and the other end to the computer, the power indicator of the module lights up, at this time, you can log in to the Raspberry Pi through the serial port on the computer side (the Raspberry Pi needs to be enabled for serial control).
  3. Connect the USB device to the ports of USB1~USB4, the corresponding LEDs D1~D4 are lit, then the device works normally.

Raspberry Pi Serial Porrt

There is a switch on the back of the module, the switch can select the serial port, two switches are turned ON, and the Raspberry Pi's serial port leads to.

General Tutorial Series

Support



Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)