PoE HAT (F)

PoE HAT (F) RPi Power Over Ethernet HAT (F) For Raspberry Pi 5

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

{{{name6}}}

Primary Attribute Category: {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: Website Chinese: 官网

Onboard Interfaces

Related Products

Overview

Introduction

The PoE HAT (F) is an 802.3af/at-compliant Power Over Ethernet(POE) expansion board for the Raspberry Pi 5. Suitable for use with a PoE router or switch that supports the IEEE 802.3af/at networking standard, the Raspberry PI can be networked and powered with only one network cable.

Features

• Based on Raspberry Pi 40PIN GPIO interface, supports Raspberry Pi 5 (not suitable for PI4B and PI3B).
• PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant.
• Fully isolated switched-mode power supply (SMPS).
• Onboard high-speed active cooling fan, with metal heatsink, better heat dissipation.

Parameters

• POE input voltage: 37V-57V DC input
• POE - GPIO header: 5V 4.5A (MAX)
• POE - 2P header: 12V 2A (MAX)
• Network standard: Support IEEE 802.3af/at PoE
• Dimensions: 56.5 × 70.0mm

Work with Raspberry Pi

Connect the PoE_HAT(F) to the Raspberry Pi 5 as shown below:

Installation

Install the heatsink as shown below:

Dimensions

Resource

3D Drawing

• 3D File

FAQ

Question:Can the PoE HAT (F) be used on the PI4B or PI3B+?

 Answer:

No, PoE HAT (F) only supports PI5.

{{{5}}}

Question:Are there any drivers that need to be compiled/installed?

 Answer:

No, there is no driver needed for the PoE HAT (F).

{{{5}}}

Support

Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)

Submit Now