PI5-CASE-ARGON-NEO

PI5-CASE-ARGON-NEO

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

{{{name6}}}

Primary Attribute Category: {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: Website Chinese: 官网

Onboard Interfaces

Related Products

Note: Please assemble the case before inserting the SD card!!!

User Manual

• PI5-CASE-ARGON-NEO User Manual

Assembly Guide

How to Assemble PI5-CASE-ARGON-NEO Case

How to Assemble PI5-CASE-ARGON-NEO-M.2 Case

Software Setting

Program Bookworm System

• Insert the TF card onto the PC and then click here to program the corresponding system imager.

• After writing the image, save it and then remove the TF card.
• Insert the TF card into the card slot after assembling the case.
• Connect the matched power adapter to boot the system.
• Note: Due to the case thickness, please ensure that the Type-C connector is fully inserted. Otherwise, poor contact at the Type-C interface will prevent the device from powering on normally.

Install ARGON NEO Power Button and Fan Control Script

Step 1: Configure EEPROM to Improve Power Supply and Boot From NVMe

• Connect to the network, please ensure Raspberry Pi Time is updated and execute the following code at the terminal:

curl https://download.argon40.com/argon-eeprom.sh | bash
sudo reboot

Step 2: Install Argon Control Script and Config.txt Setting

• Connect the network and execute the following code at the terminal:

curl https://download.argon40.com/argonneo5.sh | bash
sudo reboot

• To modify the setting, you can input the following commands:

argonone-config

• To delete the driver demo, you can input the following commands:

argonone-uninstall

• Note: Please reboot the system to make the setting effective after modifying the configuration or uninstalling any items.

FAQ

Question:Can't recognize Argon NEO nvme?

 Answer:

1. Check the hardware connection: please ensure that the PCIe cable is oriented correctly and fully inserted into the connector.

2. Check software driver: configure the EEPROM setting to improve the power supply and boot from NVMe.

• Connect to the network and ensure that Raspberry Pi Time is updated and execute the following code at the terminal:

curl https://download.argon40.com/argon-eeprom.sh | bash
sudo reboot

Note: Please reboot the system to make the setting effective.

Question:What nvme drivers are supported?

 Answer:

AData Legend 700
AData Legend 800
AData XPG SX8200 Pro
Axe Memory Generic Drive
Crucial P2 M.2
Crucial P3 M.2
Crucial P3 Plus M.2
Inland PCIe NVMe SSD
Kingston KC3000
Kioxia Exceria NVMe SSD
Kioxia Exceria G2 NVMe SSD
Lexar NM620
Lexar NM710
Netac NV2000 NVMe SSD
Netac NV3000 NVMe SSD
Origin Inception TLC830 Pro NVMe
Patriot P300
Patriot P310
PNY CS1030
Sabrent Rocket 4.0
Sabrent Rocket Nano
Samsung 980
Samsung 980 Pro (500GB/1TB)
Team MP33
Western Digital Black SN750 SE (Phison Controller)

Support

Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)

Submit Now