ESP32-S3-Relay-6CH-Web

Web Page Control

Use the Bluetooth debugging assistant on your mobile phone to connect to the ESP32-S3-Relay-6CH device, obtain the IP address after connecting to WIFI, and open the web page through the IP

AP Mode

• Connect the ESP32-S3-Relay-6CH device to WIFI, with WIFI name ESP32-S3-Relay-6CH and password waveshare

• Get the current IP via Bluetooth debugging assistant
• Open the Web page to control the relay (it takes a short time to configure after the device is powered on, and it may be slow to open the Web page for the first time after each power-up)

STA Mode

• After the device is powered on, it will automatically connect to the set WIFI (you need to modify the WIFI to be connected before flashing the program
• Get the current IP via Bluetooth debugging assistant
• Open the Web page to control the relay (it takes a short time to configure after the device is powered on, and it may be slow to open the Web page for the first time after each power-up)