DC5-36-TO-DC3V3-5

DC5-36-TO-DC3V3-5 (SMD version) VIN/GND, VOUT/GND

DC5-36-TO-DC3V3-5 (With header and terminal) VIN/GND, VOUT/GND

{{{name3}}}

{{{name4}}}

{{{name5}}}

{{{name6}}}

Primary Attribute Category: {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: {{{website_en}}} Chinese: {{{website_cn}}}

Onboard Interfaces VOUT/GND VIN/GND

Related Products

Overview

Product overview

DC5-36-TO-DC3V3-5 is a compact DC-DC buck regulator module with a wide voltage input range, capable of switching between 3.3V and 5V output voltages

Features

• Supports a wide voltage input of 5~36V, with the ability to set the output to 5V or 3.3V, and the output current can reach 4A
  • The factory default is 5V output, and the input voltage range is: 6~36V
  • Can be set to 3.3V output by soldering, and the input voltage range is: 5~36V
• 3.3V or 5V buck-regulated regulated output, which can be selected by welding the switching resistor
• Adopts black immersion gold process, small in size and easy to integrate and embed
  

Version Options

      SMD version         With header and terminal

Specifications

Mode	5V mode (factory default)	3.3V mode (0R resistor must be soldered to 3.3V side)
Input voltage	DC 6~36V	DC 5~36V
Output voltage	DC 5V	DC 3.3V
Output current	0A~4A (up to 5Ain the extreme case, heat dissipation required)
Switching frequency	500KHz
Conversion efficiency	90%
Dimensions	33*16*5.7mm

• Note: When the current exceeds 3A, it is recommended to add heat dissipation
  

Interfaces

Left interface		Right interface
VIN+	Power input positive
		VOUT(+)	Power output positive
VIN-	Power input negative	GND(-)	Power output negative

Basic function

Using the DC5-36-TO-DC3V3-5 as a buck regulator module, it is connected in series between the power supply and the device, and can also be embedded in other products, thus realizing the reduction of input voltages ranging from 5V to 36V to 3.3V or 5V output voltages. The output voltage can be changed by soldering a switchable resistor

Dimensions

Resources

• Schematic diagram
• Board frame packaging

FAQ

Question:How do I switch the output voltage of this product?

 Answer:

You can switch the 0R resistor in the red box below with a soldering iron (3.3V on the left, 5V on the right)

Support

Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)

Submit Now