CC2530 Eval Kit5

CC2530 Eval Kit5 ZigBee development/evaluation kit designed for CC2530F256

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

{{{name6}}}

Primary Attribute Category: ZigBee, Modules {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: Website Chinese: 官网

Onboard Interfaces ZigBee UART

Related Products Core2530 (B) XBee USB Adapter

Introduction

ZigBee development/evaluation kit designed for CC2530F256

More

Resources

• Core2530 (B)
• XBee USB Adapter
• Core2530 (B) reprogram bootloader
• Core2530-B-Serial-Firmware
• Bootloader
• Development resources

FAQ

Question:When registering MSCOMM32.OCX, it prompts: "The module 'mscom32.ocx' is loaded, but the call to DllRegisterServer failed with error code 0x8002801c, how to solve this?

 Answer:

On 64-bit systems, you need to copy MSCOMM32.OCX to C:\Windows\SysWOW64 and then run the registration script. Note: If you still get the same error as above, you also need to copy MSCOMM32.OCX to C:\Windows\System32 and run the registration script.

{{{5}}}

Question:How does Core2530 (B) switch to the external antenna?

 Answer:

There is a 0R resistor on the onboard antenna of the PCB board. When use the external antenna, you can adjust the 0R to the external antenna side.

Note: 0R is for switching, and you can directly connect it.

{{{5}}}

Question:What antenna does the Core2530 suitable for?

 Answer:

IPEX antenna with 50ohm and 2.4G frequency band.

{{{5}}}

Question:Can Core2530 (B) only download bin format? If I am writing my own work in hex format, how can I link it if I want to use cc debugger?

 Answer:

How_to_Use_CC_Debugger_to_Burn_Core2530_(B)

{{{5}}}

Question:I bought Core2530 (B), but not XBee USB Adapter, is there any other way to burn it?

 Answer:

Two ways to enter the burn-in mode:
1. When not yet powered on first keep P2_1 ground, then power on, and then remove GND (not remove can also be), at this time has entered the burn-in firmware mode, you can re-burn the firmware.
2, When the power is on, always keep P2_1 ground, at this time has entered the burn firmware mode, you can re-burn the firmware. (Note that after burning the firmware, to remove the P2_1 ground, the module can work properly).

{{{5}}}

Support

Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)

Submit Now