Difference between revisions of "Test"
(Created page with "<div class="wiki-pages jet-green-color"> {{Infobox item|colorscheme=green |img=File:7.9inchLCD.jpg|400px|{{Amazon_nolink|default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amaz...") |
|||
| Line 10: | Line 10: | ||
|interface1=DSI | |interface1=DSI | ||
}} | }} | ||
| + | |||
| + | =Overview= | ||
| + | ==Feature== | ||
| + | *7.9inch IPS display with capacitive touch panel, hardware resolution is 400 x 1280. | ||
| + | *Capacitive touch, supports up to 5-point touch. | ||
| + | *Toughened glass capacitive touch panel, 6H hardness. | ||
| + | *DSI interface, refresh rate up to 60Hz. | ||
| + | *Working with Raspberry Pi, we provide the driver for Raspberry Pi OS. | ||
| + | *Brightness is adjustable by software. | ||
| + | *Support Pi 4B/3B+/3A+, CM3+/4 ,must be used with [https://www.waveshare.com/dsi-cable-15cm.htm adapter cable]. | ||
| + | |||
| + | =Hardware Connection= | ||
| + | ==Working with Pi4B/3B+/3B/3A+== | ||
| + | 1. Use a 15PIN FPC cable to connect the DSI interface of the display screen to the DSI interface of the Raspberry Pi board. | ||
| + | 2. Install the Raspberry Pi on the display board with the back facing down, and connect the 5V power supply and I2C communication through the 4PIN. | ||
| + | The final connection is shown below:<br/> | ||
| + | [[File:7.9inch DSI LCD2.png]]<br/> | ||
| + | ==Working with Pi5/CM4/CM3+/CM3== | ||
| + | 1. Use the "DSI-Cable-12cm" cable to connect the display's DSI interface to the 22-pin DSI1 interface on the Raspberry Pi board.<br> | ||
| + | 2. Use the "PH2.0 4PIN connection cable" to connect the display screen's 4-pin header to the 5V and GND pins on the Raspberry Pi board. (By default, it uses the I2C0 of the DSI interface. If using the I2C1 mode, you will need to additionally connect the SDA and SCL pins.) | ||
| + | |||
| + | |||
| + | |||
| + | =Resource= | ||
| + | ==Software== | ||
| + | *[https://files.waveshare.com/upload/d/d7/Panasonic_SDFormatter.zip Panasonic_SDFormatter] | ||
| + | *[https://files.waveshare.com/upload/7/76/Win32DiskImager.zip Win32DiskImager] | ||
| + | *[https://files.waveshare.com/upload/5/56/Putty.zip putty] | ||
| + | ==Pre-installed images== | ||
| + | *[https://drive.google.com/file/d/1p7Ke8DKQ8Ru9muEfswhfgCT6HF6sedta/view?usp=sharing 7.9inch DSI LCD_220906_32_bullseye] | ||
| + | *[https://drive.google.com/file/d/1JmA8A_h7qf5HROfE6fVvRA8H0eCe7daX/view Waveshare DSI LCD - Pi4 pre-install image] | ||
| + | *[https://drive.google.com/file/d/1lJLzrlXGnWi1E_Yby3tWqKlB50TGtJpn/view?usp=sharing Waveshare DSI LCD - Pi3 pre-install image] | ||
| + | |||
| + | ==3D Drawing== | ||
| + | *[https://files.waveshare.com/upload/b/bf/79inch-lcd-dsi-asm-20221112.zip 7.9inch DSI LCD 3D Drawing] | ||
| + | =FAQ= | ||
| + | {{FAQ|How to replace the Raspberry Pi boot logo image? | ||
| + | | | ||
| + | Just replace the customized image with one from this directory /usr/share/plymouth/themes/pix/splash.png. | ||
| + | ||}} | ||
| + | |||
| + | =Support= | ||
| + | {{Servicebox1}} | ||
Latest revision as of 03:06, 13 March 2024
| ||
Overview
Feature
- 7.9inch IPS display with capacitive touch panel, hardware resolution is 400 x 1280.
- Capacitive touch, supports up to 5-point touch.
- Toughened glass capacitive touch panel, 6H hardness.
- DSI interface, refresh rate up to 60Hz.
- Working with Raspberry Pi, we provide the driver for Raspberry Pi OS.
- Brightness is adjustable by software.
- Support Pi 4B/3B+/3A+, CM3+/4 ,must be used with adapter cable.
Hardware Connection
Working with Pi4B/3B+/3B/3A+
1. Use a 15PIN FPC cable to connect the DSI interface of the display screen to the DSI interface of the Raspberry Pi board.
2. Install the Raspberry Pi on the display board with the back facing down, and connect the 5V power supply and I2C communication through the 4PIN.
The final connection is shown below:
Working with Pi5/CM4/CM3+/CM3
1. Use the "DSI-Cable-12cm" cable to connect the display's DSI interface to the 22-pin DSI1 interface on the Raspberry Pi board.
2. Use the "PH2.0 4PIN connection cable" to connect the display screen's 4-pin header to the 5V and GND pins on the Raspberry Pi board. (By default, it uses the I2C0 of the DSI interface. If using the I2C1 mode, you will need to additionally connect the SDA and SCL pins.)
Resource
Software
Pre-installed images
- 7.9inch DSI LCD_220906_32_bullseye
- Waveshare DSI LCD - Pi4 pre-install image
- Waveshare DSI LCD - Pi3 pre-install image
3D Drawing
FAQ
Just replace the customized image with one from this directory /usr/share/plymouth/themes/pix/splash.png.
{{{5}}}
Support
Technical Support
If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)