| ESP32-C6-Zero
|
|
|
| with pin header
|
ESP32-C6
USB Type-C
|
|
|
|
|
|
|
|
|
|
|
Primary Attribute
|
|
|
| Category:
|
| {{{userDefinedInfo}}}:
|
{{{userdefinedvalue}}}
|
| Brand: Waveshare
|
|
|
|
|
|
|
|
Overview
The ESP32-C6-Zero is a low-cost, high-performance microcontroller development board with a compact size and rich peripheral interfaces.
Adopts ESP32-C6-MINI-1 as the main chip, with RISC-V 32-bit single-core processor, support up to 160 MHz, and built-in 320KB ROM 512KB HP SRAM, 16KB LP SRAM, and 4 MB flash. Onboard standard Raspberry Pi Pico pin headers, it can be compatible with multiple peripheral devices and is easier to use in different application scenarios.
You can choose ESP-IDF and Arduino in software so that you can easily and quickly get started and apply it to the product.
Features
- Adopts ESP32-C6-MINI-1 as the main chip, with RISC-V 32-bit single-core processor, support up to 160 MHz.
- Integrated 320KB ROM, 512KB HP SRAM, 16KB LP SRAM, and 4MB Flash memory.
- Integrated 2.4GHz WiFi 6 and BLE (Bluetooth LE) dual-mode wireless communication, with superior RF performance.
- Type-C connector, easier to use.
- Rich peripheral interfaces, including standard Raspberry Pi Pico interfaces, better compatibility and expandability.
- Castellated module allows soldering directly to carrier boards.
- Support multiple low-power modes, easy to adjust communication distance, data rate, and power consumption, to meet various application scenarios with power consumption requirements.
- Please use the provided " WS_TCA9554PWR " file to set GPIO22（SDA）and GPIO23（SCL）as I2C functions for GPIO extension to make the device function complete.
- Please note that GPIO22 (SDA) and GPIO23（SCL） are used for TCA9554PWR, and you only can connect these pins to I2C slave device, and do not connect to others.
