2.7inch e-Paper HAT
From Waveshare Wiki
| ||
| ||
Introduction
Note: As the raw panel requires a driver board, we recommend you to buy the HAT or buy a driver board for use, or you need to make the driver board by yourself. And this instruction is based on the version with PCB or driver board.
264x176, 2.7inch E-Ink display HAT for Raspberry Pi, SPI interface
More |
Resources
Documentation
Demo code
Datasheets
Related Resources
This is a post in Arduino Form about our SPI e-Paper thanks to ZinggJM, maybe you want to refer to.
FAQ
Answer:
- Two-color B/W e-paper
- 【Working】Temperature: 0~50°C; Humidity: 35%~65%RH
- 【Storage】Temperature: ≤30°C; Humidity: ≤55%RH; Max storage time: 6 months
- 【Transport】Temperature: -25~70°C; Max transport time: 10 days
- 【Unpack】Temperature: 20°C±5°C; Humidity: 50%RH±5%RH; Max storage time: Should be assembled in 72h
- Three-Color e-Paper
- 【Working】Temperature: 0~40°C; Humidity: 35%~65%RH
- 【Storage】Temperature: ≤30°C; Humidity: ≤55%RH; Max storage time: 3 months
- 【Transport】Temperature: -25~60°C; Max transport time: 10 days
- 【Unpack】Temperature: 20°C±5°C; Humidity: 50%RH±5%RH; Max storage time: Should be assembled in 72h
When store three-color e-Paper, please refresh it to white, and keep the screen upward. Note that you need to update it at least every three months.
Support
Support
If you require technical support, please go to the Support page and open a ticket.