Features

• Compatible with UART GPS NEO-6M
• NEO-6M-C onboard, with high-gain active antenna
• IPX interface, for connecting different active antennas
• Chargeable backup battery, keeps the ephemeris data when power down, supports hot starts
• Onboard EEPROM for storing config information

Specifications

• TTL level, compatible with 3.3V/5V systems
• Default baud rate 9600, configurable via u-center
• Operating voltage: 2.7V-5.0V (VCC input)
• Operating current: 45mA
• TXD/RXD impedance: 510Ω

Applications

• GPS Navigator
• Quadcopter Positioning

How to Use

In the case of working with a MCU:

• VCC: connects to 3.3V/5V
• GND: connects to GND
• TXD: connects to MCU.RX
• RXD: connects to MCU.TX
• PPS: connects to MCU.IO, timepulse output (optional)

Software Demo

The UART GPS NEO-6M-C module supports software like u-center, GoogleEarth, etc., pretty easy to use. The following pictures show that using the module with u-center:

u-center user interface:

Positioning info on the text console:

Photos

Recommended Items

• For debugging the GPS module indoor, you need: Bluetooth Master UART Board and Bluetooth Slave UART Board each 1 pcs
• Antenna: GPS External Antenna (B)

Downloads

Development resources: demo codes, schematic, datasheets, etc.
Wiki: www.waveshare.com/wiki/UART_GPS_NEO-6M-C

Selection Guide

• UART GPS NEO-6M-C × 1