Rail-mount TTL To RS422 Galvanic isolated Converter, Anti-surge, Multiple Isolation Protection

SKU:23652
Part No.:TTL TO RS422 (B)
Brand:Waveshare

$9.99
PriceQuantity
$9.592+
$9.393+
$9.314+
Related Products:
Description

Details

Rail-mount TTL To RS422 Galvanic isolated Converter, Anti-surge, Multiple Isolation Protection
Rail-mount TTL To RS422 (B)

Galvanic isolated Serial Port Converter

Features at a glance
  • Compatible with TTL/RS422 standard, converting the TTL signal into differential RS422 signal, support full duplex communication
  • Compatible with 3.3V ~ 5V TTL signal level, provides anti-reverse and over-voltage protection for power supply interface
  • Onboard unibody power supply isolation, provides stable isolated voltage and needs no extra power supply for the isolated terminal
  • Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
  • Onboard TVS (Transient Voltage Suppressor), effectively suppresses surge voltage and transient spike voltage in the circuit, anti-electrostatic
  • Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provide over-current/over-voltage protection, improve shock proof performance
  • Onboard RS422 input and output terminal 120R resistor, enabled/disabled via jumper
  • Industrial rail-mount ABS case design, small in size, easy to install, and cost-effective
Specifications
Product Type Galvanic isolated TTL to RS422 converter
Power supply interface Power supply 3.3V ~ 5V
Protection over-voltage, reverse-proof
Device Port TTL/RS422 standard compatible
TTL Connector screw terminal
Transmission distance about 10m
Transmission mode point-to-point
RS422 Connector screw terminal
Protection surge-suppress and 15KV ESD protection
Terminal resistor 120R, enabled/disabled via jumper (inside the case)
Transmission Distance About 1.2km
Transmission Mode full duplex mode, point-to-multipoint (up to 256 nodes, it is recommended to use repeaters for 16 nodes or more)
Appearance Case Rail-mount ABS case, suitable for 35mm DIN rail
Dimensions 106.0 × 58.6 × 36.0mm

Primary function

Converting the TTL signal into balanced differential RS422 signal
for interface converting, expanding nodes and long-distance communication

Rail-Mount Support

Easy To Combine Multi Rail-Mounted Serial Server Together, More Freely

Multiple Protection, Safe And Stable

Onboard power and signal isolation, provide stable isolated voltage, high reliability and strong anti-interference. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, anti-electrostatic. Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage protection, improves shock proof performance

Interface Introduction
Top side screw terminal Bottom side screw terminal
VCC Power Input
DC 3.3V~5V power supply
R+ RS422 differential signal receive positive
GND Ground R- RS422 differential signal receive negative
TXD TTL transmit data pin T- RS422 differential signal transmit negative
RS485 differential signal negative (B-)*
RXD TTL receive data pin T+ RS422 differential signal transmit positive
RS485 differential signal positive (A+)*
GND TTL signal ground GND RS485/422 signal ground

* Note: the TTL TO RS422 (B) is designed to be used with RS422 devices, however, it is also possible to be used with RS485 devices (yet only sending is available). It is recommended to use TTL TO RS485 (B) for RS485 device.

Communication Connection Diagram

TTL convert to RS422, point to point, full duplex communication, suitable for interface conversion


TTL convert to RS422, point-to-multipoint, full duplex communication, suitable for expanding nodes


Two groups TTL to RS422 conversion, point-to-point, full duplex communication, suitable for extending the communication distance of TTL


Application Examples

The TTL TO RS422 (B) can be widely used for point-to-point, point-to-multipoint, long distance cascaded communication network between two hosts, or between host and MCU/Peripheral. It also can be used in the application scenarios that require TTL to RS422 conversion such as Industrial Automation and IoT.

Product Show
Dimensions
Resources & Services

Weight: 0.068 kg

Quick Overview

  1. TTL TO RS422 (B) x1
  2. Screwdriver x1
1
2