- Description
Details
Active Digital isolated Serial Converter
Adopts SP3232EEN and SP485EEN chips solution, provides stable communication with built-in galvanic isolation, lightningproof and anti-electrostatic protection and so on, it is an ideal choice for industrial control equipments and/or applications with high communication requirement.
- Onboard SP3232EEN and SP485EEN chips. Fast communication, stable and reliable, better compatibility
- Stable transmission at the rate of 300~921600bps
- Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
- Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
- Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic
- Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock proof performance
- Onboard 15KV ESD isolation protection and 600W lightningproof & anti-surge protection
- Onboard 120R terminal resistor on the RS485/RS422 interface, disable by default, configurable by jumper
- Onboard power supply screw terminal, allows 5V~36V DC wide range input
- 3 LEDs for indicating the power and transceiver status
- Industrial rail-mount ABS case design, small in size, easy to install, and cost-effective
RS232 TO RS485/422
RS232 DB9 male port
RS232 TO RS485/422 (F)
RS232 DB9 female port
| PRODUCT TYPE | Active digital isolated RS232 to RS485/422 serial converter | |
|---|---|---|
| POWER SUPPLY INTERFACE | Power supply | 5~36V DC |
| Protection | Anti-reverse | |
| Baud rate | 300 ~ 921600bps (300~115200bps is recommended for long-distance reliable communication) | |
| Device port | RS232, RS485/422 | |
| RS232 | Connector | DB9 male/female |
| Transmission distance | about 15m | |
| Transmission mode | point-to-point | |
| RS485/422 | Connector | Screw terminal |
| Direction control | Hardware automatic control | |
| Protection | 600W lightningproof and surge-suppress, 15KV ESD protection | |
| Terminal resistor | 120R, enabled/disabled via switch | |
| Transmission distance | About 1.2km | |
| Transmission mode | Point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more) | |
| Appearance | Enclosure | Rail-mount ABS case, suitable for 35mm DIN rail |
| Dimensions | 81.9 × 54.0 × 32.0mm | |
Converting the RS232 signal into balanced differential RS485/422 signal for interface converting, expanding nodes and long-distance communication.
- Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
- Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock proof performance.
The RS232 signal can be converted into a balanced differential RS485/422 signal with stable transmission rate, the transmission distance is about 1.2km for RS485/422
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Quick Overview
RS232 TO RS485/422
- RS232 TO RS485/422 x1
- Screwdriver x1
RS232 TO RS485/422 (F)
- RS232 TO RS485/422 (F) x1
- Screwdriver x1
