- Description
- Package Content
Details
GNSS module based on NEO-M8T for Raspberry Pi, single-satellite timing feature
accurate & fast positioning with minor drifting, low power consumption, outstanding ability for anti-spoofing & anti-jamming
![](/img/devkit/accBoard/NEO-M8T-GNSS-TIMING-HAT/NEO-M8T-GNSS-TIMING-HAT-details-1.jpg)
This is a Raspberry Pi GNSS HAT based on NEO-M8T with multi-constellation receiver support, as well as precise single-satellite timing feature. It supports concurrent reception of up to 3 GNSS (GPS, Beidou, Galileo, GLONASS) and augment systems like SBAS, QZSS, IMES, and D-GPS. It features accurate & fast positioning with minor drifting, low power consumption, outstanding ability for anti-spoofing & anti-jamming, and so on.
By simply attaching it onto the Pi, it is fairly easy to enable GNSS capability for your Raspberry Pi.
- Precise timing feature, high availability even with one single satellite
- High dynamic range radios with both analog and digital interference mitigation, supporting applications in wireless communications equipment
- Multi-constellation receiver support, concurrent reception of up to 3 types of GNSS satellite systems from GPS, Beidou, Galileo, and GLONASS, and still retains low power consumption
- Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location
- A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity
- Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing
- Supports U-Center, an easy way to config the module
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Breakouts the module's UART and I2C interface, for connecting with host boards like Arduino/STM32
- Baudrate range: 4800~921600bps (9600bps by default)
- Supports DDC (I2C compliant) interface: up to 400KHz (max)
- Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
- 4x LEDs for indicating the module operating status
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
GNSS Specifications | ||||||
---|---|---|---|---|---|---|
NEO-M8T | GPS & GLONASS | GPS | GLONASS | BeiDou | Galileo | |
Frequency band | 72-channel u-blox M8 engine GPS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1 SAIF, GLONASS L1OF, BeiDou B1, Galileo E1B/C |
|||||
Horizontal positioning accuracy | Autonomous | 2.5m CEP | 2.5m CEP | 4.0m CEP | 3.0m CEP | - |
SBAS | 2.0m CEP | 2.0m CEP | - | - | - | |
Max navigation update rate | 4Hz | 10Hz | 10Hz | 10Hz | 10Hz | |
Time-To-First-Fix | Cold starts | 25s | 29s | 30s | 34s | 45s |
Hot starts | 1s | 1s | 1s | 1s | 1s | |
Aided starts | 2s | 2s | 2s | 3s | 7s | |
Sensitivity | Tracking and navigating | -167 dBm | -166 dBm | -166 dBm | -159 dBm | -159 dBm |
Aided acquisition | -157 dBm | -157 dBm | -151 dBm | -146 dBm | -142 dBm | |
Re-acquisition | -160 dBm | -160 dBm | -156 dBm | -156 dBm | -153 dBm | |
Cold starts | -148 dBm | -148 dBm | -145 dBm | -143 dBm | -138 dBm | |
Hot starts | -160 dBm | -160 dBm | -156 dBm | -155 dBm | -151 dBm | |
Velocity accuracy | 0.05 m/s | 0.05 m/s | 0.1 m/s | 0.1 m/s | 0.1 m/s | |
Heading accuracy | 0.3 degree | 0.3 degree | 0.4 degree | 0.5 degree | 0.5 degree | |
PPS accuracy | Clear sky | ≤20ns | ||||
Indoor | ≤500ns | |||||
Jitter | ±11ns | |||||
PPS frequency | 0.25Hz…10MHz (configurable) | |||||
Operational limits | Acceleration (max): 4g | |||||
Altitude (max): 50000m | ||||||
Velocity (max): 500m/s | ||||||
Other Specifications | ||||||
Communication interface | USB, UART (4800~921600bps, 9600bps by default), I2C (max 400KHz) | |||||
Update rate | 1Hz (default), 10Hz (max) | |||||
Protocol | NMEA 0183 Version 4.0 (V2.3 or V4.1 selectable), UBX, RTCM 2.3 | |||||
Power supply | 5V | |||||
Overall current | <45mA@5V (Continue mode) | |||||
Module current | 32mA@3V (Continue mode) | |||||
Operating temperature | -40℃ ~ 85℃ | |||||
Dimensions | 65mm × 30.5mm |
Compatible with Raspberry Pi series boards, Jetson Nano
![](/img/devkit/accBoard/NEO-M8T-GNSS-TIMING-HAT/NEO-M8T-GNSS-TIMING-HAT-details-3.jpg)
high integrity, precise timing feature, high availability even with one single satellite
Cost effective, high precision, easy implement
![](/img/devkit/accBoard/NEO-M8T-GNSS-TIMING-HAT/NEO-M8T-GNSS-TIMING-HAT-details-5.jpg)
concurrent reception of up to 3 types of GNSS satellite systems, and still retains low power consumption
Supports GPS, Beidou, Galileo, and GLONASS
![](/img/devkit/accBoard/NEO-M8T-GNSS-TIMING-HAT/NEO-M8T-GNSS-TIMING-HAT-details-7.jpg)
Augment system is aimed at improving the accuracy, integrity, reliability, and availability of positioning and navigation
Supports augment systems including SBAS, QZSS, IMES, D-GPS
![](/img/devkit/accBoard/NEO-M8T-GNSS-TIMING-HAT/NEO-M8T-GNSS-TIMING-HAT-details-9.jpg)
Features -167dBm navigating sensitivity, outstanding ability for anti-spoofing & anti-jamming
![](/img/devkit/general/geo-fencing.jpg)
an easy way to config the module
![](/img/devkit/accBoard/NEO-M8T-GNSS-TIMING-HAT/NEO-M8T-GNSS-TIMING-HAT-details-13.jpg)
Ideal for fleet management, asset tracking, financial transaction, smart electricity grids, security systems, industrial PDA, GIS app, etc.
![](/img/devkit/accBoard/MAX-M8Q-GNSS-HAT/MAX-M8Q-GNSS-HAT-details-3.jpg)
![](/img/devkit/accBoard/NEO-M8T-GNSS-TIMING-HAT/NEO-M8T-GNSS-TIMING-HAT-details-intro.jpg)
- NEO-M8T module
- RT9193-33 power chip
- TXS0108EPWR voltage translator
- Status indicators
RXD/TXD: UART TX/RX indicator
PPS: GPS status indicator
PWR: power indicator - Battery holder
supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
- Raspberry Pi GPIO header
for connecting with Raspberry Pi - USB port
- UART, I2C interface
for connecting with other MCUs - GNSS antenna connector
![](/img/devkit/accBoard/NEO-M8T-GNSS-TIMING-HAT/NEO-M8T-GNSS-TIMING-HAT-details-inter.jpg)
![](/img/devkit/accBoard/NEO-M8T-GNSS-TIMING-HAT/NEO-M8T-GNSS-TIMING-HAT-details-size.jpg)
![](/img/devkit/LCD/common/res_banner.png)
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Weight: 0.131 kg