Details
suitable for evaluating the Raspberry Pi CM5 or being integrated into end products
PoE Base Board for all Compute Module 5 Variants
PoE Base Board
the base board only
PoE Mini-Computer Kit
PoE Base Board + metal case + power supply adapter
| CM5 socket | suitable for all variants of Compute Module 5 |
|---|---|
| Networking | Gigabit Ethernet RJ45 connector, integrates 802.3af/at-compliant PoE circuit (5V/5A) |
| Connector | Raspberry Pi 40PIN GPIO header |
| USB | USB 3.2 Gen1 × 2 |
| USB 2.0 × 2 | |
| MIPI | 4-lane MIPI interface × 2 (22pin 0.5mm FPC connector) |
| Video | HDMI port × 2, supports 4K output |
| RTC | CR / ML2032 battery holder |
| Storage | TF card slot for Compute Module 5 Lite (without eMMC) variants |
| Fan connector | 5V, JST-SH PWM 4PIN connector |
| NVMe | PCIe Gen2/3 × 1 |
| Power input | 5V 5A |
| Dimensions | the base board: 160 × 90 (mm) |
| with metal case: 200.5 × 97.5 × 31.0 (mm) |
standard CM5 socket and Raspberry Pi 40PIN GPIO header
suitable for all variants of Compute Module 5
providing both network connection and power supply for your Raspberry Pi in one cable
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, support booting Raspberry Pi from NVMe Solid State Drive
* for reference only, please refer to the Package Content for detailed part list
Note: Only supports the NVMe Protocol Solid State Drives.
onboard connectors including MIPI / M.2 / HDMI / USB / ETH / TF Card Slot
each cut-out is completely aligned with the connector
comes with cooling fan, combined with the airflow vent, better heat dissipation
wall mount holes on two sides, handy for mounting
Ideal for Raspberry Pi applications with multiple peripheral requirements, or other industrial context
* for reference only, please refer to the Package Content for detailed part list
- CM5 socket
Suitable for all variants of Compute Module 5 - USB Type-C power supply / programming
5V/5A power supply, also allows burning system image into Compute Module 5 variants - M.2 Solid State Drive indicator
Keeps blinking while reading/writing - M.2 M key
Compatible with 2280/2260/2242/2230 NVMe drives or AI accelerator module - Dual MIPI interfaces
for connecting DSI LCDs or CSI cameras - PSW button
power button - 40PIN GPIO header
for connecting various HATs - RTC battery holder
Supports CR/ML2032 button cell - HDMI ports
2x HDMI ports, supports dual 4K output - Status indicators
ACT: Raspberry Pi operating status indicator
PWR: Raspberry Pi power indicator
- USB2.0 ports
2x USB2.0 ports, for connecting sorts of USB devices - USB 3.2 Gen1 ports
2x USB 3.2 Gen1 high-speed ports, supports 5Gbps synchronous operation - Gigabit Ethernet connector
Gigabit Ethernet RJ45 with PoE support - FAN connector
for connecting cooling fan - Misc configurations
for extending other functions - IO-VREF/PoE selection
CM5 IO logic level: 3.3V or 1.8V
PoE: enable (EN) or disable (DIS) - CAM1 and DISP1 I2C bus
fit the jumpers when using CAM1 or DISP1 - TF card slot (bottom side)
insert a TF card with pre-burnt system, to start up Compute Module 5 Lite
PoE Base Board
PoE Mini-Computer Kit
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Quick Overview
CM5-PoE-BASE-A
- CM5-PoE-BASE-A x1
- Screws pack x1
CM5-POE-BOX-A
- Metal case (top and bottom) x1
- CM5-PoE-BASE-A x1
- CM4-IO-BOARD-CASE-A-ADAPTER x1
- CM5-FAN-4010-5V x1
- OPTIONS 27W USB-C power supply x1
- Screwdriver x1
- Antenna connector rubber plug x1
- Button cap x1
- Screws pack x1
