PiRacer, AI Racing Robot Powered by Raspberry Pi 4, Supports DonkeyCar Project

$161.99 - $222.99
Pi4 + TF Card
Related Products:

Details

PiRacer — AI Autonomous Racing Robot Powered by Raspberry Pi 4, Supports DonkeyCar Project, Deep Learning, Self Driving

Note: the Raspberry Pi 4 is optional.

SAFETY CAUTIONS

  • Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they're not properly recharged or used.
  • Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery.
  • Do not mix use old batteries with new ones, avoid using batteries of different brands.
  • When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.
  • Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.
  • Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.
Resources & Services
Raspberry Pi AI Robot Selection Guide
 
PiRacer

PiRacer Pro
Controller Raspberry Pi 4 Model B
OS Raspberry Pi OS (Raspbian)
Language Python
Camera 5MP HD resolution, 160° FOV wide angle camera
OLED 0.91" 128×32 pixels
Wireless 2.4GHz / 5GHz dual-band WiFi, Bluetooth 5.0
Teleoperation Gamepad, webpage
Communication WiFi
Protection over charge/discharge protection, over current protection, short circuit protection, reverse proof
Driving Type Ackerman steering
Dual gearmotor rear wheel drive
Ackerman steering
High speed motors 4WD
Front and rear axle differentials
Shock absorber N/A Adjustable oil-filled shocks
4WD independent suspension
Power supply 12.6V, 18650 battery × 3
(connected in series)
8.4V, 18650 battery × 4
(two in parallel, two in series)
Note: the 18650 batteries are NOT included.
motor 37-520 DC gearmotor
Reduction rate 1:10
Idle speed 740RPM
RC380 high speed carbon brushed motor
Idle speed 15000RPM
Servo 9kg/cm torque 6kg/cm torque
Chassis Aluminum alloy chassis Quality rugged plastic chassis
Crashproof Front sponge
Program library DonkeyCar
Suggestion Competition level
Experienced programming skill required
High speed competition level
Experienced programming skill required

Quick Overview

  • The 18650 batteries are NOT included
  • Please note that the battery length SHOULD be less than 67mm, some batteries with protection plate in the market are NOT supported, learn more
  1. OPTIONS PI4B-4GB
  2. OPTIONS TF Card 32GB
  3. PiRacer metal kit 6PCS
  4. EVA felt pad 2PCS
  5. 3D-printed motor lid
  6. PiRacer expansion board
  7. RPi Camera (G)
  8. Acrylic piece
  9. Servo mount
  10. Metal Gearmotor 2PCS
  11. Tire 4PCS
  12. Coupler 2PCS
  13. MG996R servo
  14. MG996R servo wheel
  15. Steering knuckle 2PCS
  16. Ball bearing 4PCS
  17. M3 plastic ball joint 4PCS
  18. M3 pull bar 2PCS
  19. 12.6V battery charger + EU head
  20. Wireless gamepad
  21. 6Pin cable
  22. Spanner 2PCS
  23. Screwdriver 2PCS
  24. Mini cross wrench sleeve
  25. TF card reader
  26. Screws pack
  27. Track map