NAS Multi-functional Mini-Computer Designed for Raspberry Pi Compute Module 4 (NOT included), Network Storage, Dual Solid State Drive slots

SKU:24678
Part No.:CM4-NVME-NAS-BOX
Brand:Waveshare

$89.99
PriceQuantity
$89.192+
$88.793+
$88.634+
Description

Details

NAS Multi-functional Mini-Computer Designed for Raspberry Pi Compute Module 4 (NOT included), Network Storage, Dual Solid State Drive slots, Dual Gigabit Ethernet ports, 4G Network, Metal Case
CM4 NAS Mini-Computer Kit

Designed for Raspberry Pi Compute Module 4

Network Storage USB 3.2 Dual Gigabit Ethernet ports 4G

* the Compute Module 4 is NOT included.


Features At A Glance
  • All-in-one Mini-Computer, mainly designed for home, small home office, etc.
  • Provides a simple and easy-to-use solution, no expert knowledge of networking and storage systems required
  • Onboard 2× M.2 M KEY slots for installing NVME Solid State Drives
  • Onboard MINI PCIE connector for installing 4G module
  • 2× HDMI 4K output interfaces
  • Onboard USB3.2 ports, IR receiver, RTC, dual Gigabit Ethernet connectors, 3.5mm jack, etc.
Specifications
CM4 socket Suitable for all variants of Compute Module 4
NETWORKING Gigabit Ethernet RJ45 connector × 2 (Original Network port ETH0, and PCIE extended Network port ETH1)
MINI PCIE connector, supports 4G module (USB protocol, can not support PCIE protocol)
Nano-SIM card slot, supports standard Nano-SIM card for 4G/3G/2G Internet access
M.2 Dual NVME Solid State Drives slots (compatible with 2230, 2242, 2260, 2280)
USB USB 3.2 Gen1 (5Gbps) port× 2
CSI camera MIPI CSI-2 camera port × 2, 15pin 1.0mm FPC connector
HDMI HDMI × 2, supports 4K 30fps output
Audio 3.5mm earphone/mic jack
RTC Real-time clock with battery socket and ability to wake Compute Module 4
TF card slot TF card socket for Compute Module 4 Lite (without eMMC) variants
Power input Type-C (5V 4A)
Dimensions 128 × 122 × 36mm
Selection guide
CM4 Base Board Interface count and specifications
PoE Gigabit
ETH
40PIN
GPIO
PCIe USB① DSI HDMI CSI RTC Fan
Header
Power
Input
Features

NANO A
    2.0×1     ×1   5V CM4 sized

NANO B
×1   2.0×1 ×1 ×1 ×1   5V CM4 sized

NANO C
  2.0×1 ×1 ×1 ×1   5V Onboard Camera

mini Base A
×1 M.2 M 2.0×4 ×1 ×2 ×2 5V 5V mini size

mini Base B
×1 M.2 M 2.0×4 ×1 ×2 ×2 5V 5V mini size

mini Base C
×1 M.2 M 2.0×2 ×1 ×2 5V 5V Dedicated 40PIN LCD Connector

Touch screen
×1   M.2 M 2.0×4   ×1 ×1     5V IPS screen

Mini Dual Gigabit
×2   2.0×1         5V SH1.0 5V dual ETH

Binocular camera
×1 M.2 M 2.0×4   ×2       5V dual 8MP
cameras

4CH RS485
×1     2.0×2   ×1 ×2 ×1 5V 7-36V dual ETH

WIFI6 DUAL ETH
×1 M.2 E 2.0×3 ×1 ×2 ×2 ×1 5/12V 7-36V WIFI6 dual ETH

Dual Gigabit ETH
×2 3.0×3 ×1 ×2 ×2 5/12V 7-36V

IoT Dual Gigabit ETH
×2 3.0×2 ×1 ×2 ×2 5/12V 5V 5G/4G support

IoT Base
×1 Gen2×1 2.0×2 ×2 ×2 ×2 5/12V 7-36V 5G/4G support
RS232
RS485
ADC

PoE Base (B)
×1 Gen2×1 2.0×4 ×2 ×2 ×2 5/12V 5V RS232
RS485

PoE UPS Base
×1 M.2 M 2.0×4 ×1 ×2 ×2 5/12V 7-36V UPS

PoE Base
×1 3.0×4 ×2 ×2 ×2 5/12V 7-36V

Raspberry Pi official
×1 Gen2×1 2.0×4 ×2 ×2 ×2 12V 12V

Wireless base
  ×1   M.2 B /
Mini-PCIe
2.0×3   ×1 ×1 5/12V 5V or
7-36V
5G/4G support
RS485
CAN
rail-mount

UPS Wireless base
  ×1   M.2 B 2.0×3   ×1 ×1 5/12V 5V or
7-36V
With UPS
5G/4G support
RS485
CAN
rail-mount

NAS Mini Computer
  ×2 M.2 M×2/
Mini-PCIe
3.0×2   ×2 ×2   5V dual M.2 M KEY slots

5″ touch screen
×1 M.2 M 2.0×4   ×1 ×2 5/12V 5V  

7″ all-in-one
  ×1   M.2 M 2.0×4 used ×1 used 5/12V
used
7-36V touch screen
camera
speaker

13.3″ all-in-one
  ×1     2.0×2           12V HD touch screen

13.3″ Magic Mirror
  ×1     2.0×2           12V HD screen,
Speech Assistant
Note ① USB 3.0 is equivalent to USB 3.2 Gen1
② There's PoE header only on the Raspberry Pi official IO board without PoE circuit, that means additional PoE module is required for the official IO board to enable PoE feature.
Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A).
Dual Solid State Drives slots

Onboard 2× M.2 M KEY slots, support all sizes of NVME solid state drives
(2230, 2242, 2260, 2280)

VESA Mounting Support

Supports 100×100mm and 75×75mm Standard VESA Holes

for reference only, the stand and display are NOT included.

Onboard Rich Interfaces

Precise Cut-Out With Clear Label

Each Cut-Out Is Completely Aligned With The Connector

Application Example

Supports connecting with multiple peripheral devices, suitable for various application scenarios.

for reference only, please check the Package Content for the detailed part list

Product Show

Installation instruction

* for reference only, the CM4 is NOT included.


Outline dimensions
Resources & Services

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Weight: 0.551 kg

Quick Overview

  1. CM4-NVME-NAS-BASE x1
  2. Metal case (top and bottom, with cooling fan) x1
  3. Momentary push button switch ~12mm (with LED and four pre-wired cables) x1
  4. 30×40mm Silicone thermal tape x1
  5. 15×15mm Silicone thermal tape (2PCS) x1
  6. 7×7mm Silicone thermal tape (2PCS) x1
  7. Antenna connector rubber plug (2PCS) x1
  8. Screws pack x1