Open429Z-D Package A, STM32F4 Development Board

SKU:8894
Part No.:Open429Z-D Package A
Brand:Waveshare

$112.99 Qty:

PriceQuantity
$110.392+
$108.793+
$107.894+

Related Products:

32F429IDISCOVERY / STM32F429I-DISC1, STM32F4 Discovery Kit

Open429Z-D Package B, STM32F4 Development Board

Open429Z-D Standard, STM32F4 Development Board

Description
Package Content

Details

STM32 development board designed for the ST official tool 32F429IDISCOVERY, and integrates various standard interfaces, pretty easy for peripheral expansions.

Overview

Open429Z-D is an STM32 development board designed for the ST official tool 32F429IDISCOVERY, which features the STM32F429ZIT6 microcontroller onboard.

The Open429Z-D supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32 series microcontrollers.

What's on the mother board

STM32F429ZIT6 development board on board resource

32F429IDISCOVERY socket: for easily connecting the 32F429IDISCOVERY
MCU pins connector: all the MCU I/O ports are accessible on expansion connectors for further expansion
USB connector: USB to UART via the onboard convertor PL2303
I2C1/I2C2 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), FRAM (FM24CLxx), etc.
I2S2/I2S3/I2C1 interface: easily connects to I2S peripherals such as audio module, etc.
DCMI interface: for connecting camera
SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI
CAN1 interface: communicates with accessory boards which feature the CAN device conveniently
CAN2 interface: communicates with accessory boards which feature the CAN device conveniently
UART3 interface: easily connects to RS232, RS485, USB TO 232, etc.
SPI1/SPI4 + AD/DA interfaces:
- easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.
- easily connects to AD/DA modules (SPI1 features AD/DA alternative function)
UART2 interface: easily connects to RS232, RS485, USB TO 232, etc.
8-bit FMC interface: easily connects to peripherals such as NandFlash
SAI1 interface: for connecting audio modules
ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
5V DC jack
5V/3.3V power input/output: usually used as power output, also common-grounding with other user board
JTAG/SWD interface: for debugging/programming
Joystick jumper
- short the jumper to connect the joystick to default I/Os used in example code
- open the jumper to connect the joystick to custom I/Os via jumper wires
Boot mode switch: for configuring BOOT0 pin
USB to UART jumper
AMS1117-3.3: 3.3V voltage regulator
PL2303: USB to UART convertor
12MHz crystal
5V DC power switch
Power indicator
UART1 indicator
Joystick: five positions

What's on the 32F429IDISCOVERY

STM32F429ZIT6 microcontroller featuring 2 Mbytes of Flash memory, 256 Kbytes of RAM in an LQFP144 package
On-board ST-LINK/V2-B
mbed™ -enabled (mbed.org)
USB functions:
- debug port
- virtual COM port
- mass storage
Board power supply: through the USB bus or from an external 3 V or 5 V supply voltage
2.4" QVGA TFT LCD
64-Mbit SDRAM
L3GD20, ST MEMS motion sensor 3-axis digital output gyroscope
Six LEDs:
- LD1 (red/green) for USB communication
- LD2 (red) for 3.3 V power-on
- Two user LEDs: LD3 (green), LD4 (red)
- Two USB OTG LEDs: LD5 (green) VBUS and LD6 (red) OC (over-current)
Two push-buttons (user and reset)
USB OTG with micro-AB connector
Extension header for LQFP144 I/Os for a quick connection to the prototyping board and an easy probing
Comprehensive free software including a variety of examples, part of STM32CubeF4 package or STSW-STM32138 for legacy standard libraries usage