Open429I-C Package A, STM32F4 Development Board

SKU:9187
Part No.:Open429I-C Package A
Brand:Waveshare

$121.99 Qty:

PriceQuantity
1
$117.992
$115.993
$115.194+

Description
Package Content

Details

STM32 development board designed for STM32F429I, features the STM32F429IGT6 MCU, and integrates various standard interfaces, pretty easy for peripheral expansions.

Overview

Open429I-C is an STM32 development board designed for the STM32F429IGT6 microcontroller, consists of the mother board and the MCU core board Core429I.

The Open429I-C supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32 series microcontrollers.

What's on the mother board

STM32F429ZIT6 development board on board resource

MCU core board connector: for easily connecting the Core429I
USART3 interface: easily connects to RS232, RS485, USB TO 232, etc.
DCMI interface: for connecting camera
Capacitive touch panel interface: for connecting capacitive touch panel
CAN2 interface: for connecting CAN modules
CAN1 interface: for connecting CAN modules
SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI
ULPI interface: for connecting high-speed USB peripheral (the STM32F429I integrates USB HS controller without any PHY device)
LCD interface 1: for connecting 7inch LCD
ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
LCD interface 2: for connecting 4.3inch LCD
I2C2/I2C3 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), EEPROM (AT24Cxx), etc.
SAI1 interface: for connecting audio modules
Ethernet interface: for connecting Ethernet modules
USB connector: USB to UART via the onboard convertor PL2303
SPI1/SPI2 interfaces:
- easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.
- easily connects to AD/DA modules (SPI1 features AD/DA alternative function)
I2S2/I2S3/I2C1 interface: easily connects to I2S peripherals such as audio module, etc.
8-bit FMC interface: easily connects to peripherals such as NandFlash
5V DC jack
5V/3.3V power input/output: usually used as power output, also common-grounding with other user board
MCU pins connector: all the MCU I/O ports are accessible on expansion connectors for further expansion
PL2303: USB to UART convertor
LEDs: convenient for indicating I/O status and/or program running state
PL2303 TX-LED / RX-LED
12MHz crystal: for PL2303
Joystick: five positions
WAKE UP button: used as regular button, and/or wake up the STM32 MCU from sleep
USB to UART jumper
LED jumper
- short the jumper to connect to default I/Os used in example code
- open the jumper to connect to custom I/Os via jumper wires
Button/Joystick jumper
- short the jumper to connect to default I/Os used in example code
- open the jumper to connect to custom I/Os via jumper wires

What's on the Core429I

STM32F429IGT6 development board on board resource

STM32F429IGT6:the high performance STM32 MCU which features:
- Core: Cortex-M4 32-bit RISC
- Feature: single-cycle DSP instructions
- Operating Frequency: 180MHz, 225 DMIPS/1.25 DMIPS/MHz
- Operating Voltage: 1.8V-3.6V
- Package: LQFP176
- Memories: 1024kB Flash, 256+4kB SRAM
- MCU communication Interfaces:
  - 6 x SPI, 4 x USART, 4 x UART, 2 x I2S, 1 x SAI, 3 x I2C
  - 1 x FMC, 1 x SDIO, 2 x CAN
  - 1 x LCD-TFT
  - 1 x USB 2.0 HS/FS controller (with dedicated DMA)
  - 1 x USB HS ULPI (external PHY required)
  - 1 x 10/100 Ethernet MAC
  - 1 x 8 to 14-bit camera interface
- AD & DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)
- Debugging/Programming: supports JTAG/SWD interfaces, supports IAP
IS42S16400J: SDRAM 1 Meg Bits x 16 Bits x 4 Banks (64-MBIT)
AMS1117-3.3: 3.3V voltage regulator
MIC2075: onboard USB power management device
Power supply switch, powered from 5Vin or USB connection
Boot mode selection, for configuring BOOT0 pin
Power indicator
VBUS LED
Reset button
8M crystal
32.768K crystal, for internal RTC with calibration
JTAG/SWD interface: for debugging/programming
USB connector, supports Device and/or Host
MCU pins expander, VCC, GND and all the I/O pins are accessible on expansion connectors for further expansion
5Vin pinheader, 5V power supply is required when using USB HOST/OTG
USB OTG/HOST jumper
- short the jumper when using USB OTG/HOST
- open the jumper to disconnect from related I/O port
VBAT selection jumper
- short the jumper to use system power supply
- open the jumper to connect the VBAT to external power, such as battery
VREF selection jumper
- short the jumper to connect VREF+ to VCC
- open the jumper to connect VREF+ to other custom pin via jumper wire