- Description
- Package Content
Details
USB TO RS232/485/422/TTL
Original FT232RNL | Stable transmission | Multiple devices applicable | Multi-OS compatible
- Adopt original FT232RNL chip, fast communicating, stable and reliable, better compatibility
- Supports multiple communication interface conversion: USB to RS232, USB to RS485, USB to RS422, USB to TTL
- Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
- Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
- Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection
- Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock proof performance
- Fully automatic transceiver circuit with no delay, ensures the USB port communicates with different interfaces fastly and stably, without interfering with each other
- Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch
- 3 LEDs for indicating the power and transceiver status
- High quality USB-B and RS232 connectors, smoothly plug/pull
- Industrial grade metal case, supports wall-mount and rail-mount installations, solid and beautiful, easy to install
PRODUCT TYPE | Industrial grade digital isolated converter | |
---|---|---|
USB | Operating voltage | 5V |
Connector | USB-B | |
Protection | 200mA self-recovery fuse, isolated output | |
RS232 | Connector | DB9 male |
Protection | TVS diode, surge protection & ESD protection | |
Transmission mode | Point-to-point | |
Baud rate | 300bps ~ 921600bps | |
RS485/422 | Connector | Screw terminal |
Direction control | Hardware automatic control | |
Protection | 600W lightningproof and surge-suppress, 15KV ESD protection (reserved two 120R balancing resistors, enabled/disabled via jumper) | |
Transmission mode | Point-to-multipoints (485 mode: up to 32 nodes, it is recommended to use repeaters for 16 nodes or more; 422 mode: up to 256 nodes, it is recommended to use repeaters for 16 nodes or more) | |
Baud rate | 300bps ~ 2Mbps | |
TTL (UART) | Operating voltage | 3.3V / 5V |
Connector | Screw terminal | |
Pins | TXD, RXD, GND, 5V/3.3V | |
Protection | clamp protection diode, over-voltage/negative-voltage proof, shock proof | |
Transmission mode | Point-to-point | |
Baud rate | 300bps ~ 2Mbps | |
Indicators | PWR | Red power indicator, light up when there is USB connection and voltage is detected |
TXD | TX indicator, light up when the USB port sends data | |
RXD | RX indicator, light up when the device ports send data back | |
Operating environment | Temperature | -40℃ ~ 85℃ |
Humidity | 5%RH ~ 95%RH | |
Operating system | Mac, Linux, Android, Windows 11 / 10 / 8.1 / 8 / 7 |
Onboard original FT232RNL chip,
Fast communication, stable & reliable, better compatibility
- Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
- Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock proof performance.
Supports Mac, Linux, Android, Windows 11 / 10 / 8.1 / 8 / 7, etc.
Aluminium alloy enclosure with sand blasting and anodic oxidation
Solid and durable, Fashionable and good hand feeling
Wall-Mount And Rail-Mount Support, More flexible for industrial installation
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Weight: 0.204 kg
Quick Overview
- USB TO RS232/485/422/TTL x1
- Rail-mount buckle x1
- USB type A to type B cable ~1.2m x1
- Screwdriver x1