- Description
Details
Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian.
SIM7600E LTE Cat-1 HAT for Raspberry Pi, supports 3G / 2G, and GNSS positioning as well
For different regions, we provide multiple LTE Cat-4/Cat-1 HATs to choose from:
| SIM7600A-H 4G HAT | LTE Cat-4 | mainly applicable in North America (US, CA) |
| SIM7600E-H 4G HAT | LTE Cat-4 | mainly applicable in Europe, Southeast Asia, West Asia, Africa, China, South Korea |
| SIM7600E LTE Cat-1 HAT | LTE Cat-1 | |
| A7670E Cat-1 HAT | ||
| A7600E Cat-1/GSM/GPRS HAT | ||
| SIM7600SA-H 4G HAT | LTE Cat-4 | mainly applicable in Australia, New Zealand, Taiwan (China), Latin America |
| SIM7600CE 4G HAT | LTE Cat-4 | mainly applicable in China, and some Southeast Asia countries |
| SIM7600CE-CNSE 4G HAT | ||
| SIM7600CE-JT1S 4G HAT | ||
| A7600C1 Cat-1/GSM/GPRS HAT | LTE Cat-1 | |
| SIM7600G-H 4G HAT | LTE Cat-4 | the global version |
Please check the supported bands according to your local service provider, select the proper one when placing order.
LTE Cat-1 HAT for Raspberry Pi
enabling LTE Cat-1/3G/2G communication & GNSS positioning
Based on SIM7600E
Features at a glance
- Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
- Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
- Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
- Onboard CP2102 USB to UART converter, for serial debugging
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- SIM card slot, supports 1.8V/3V SIM card
- TF card slot for storing data like files, messages, etc.
- Onboard audio jack and audio decoder for making telephone call
- 2x LED indicators, easy to monitor the working status
- Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
- Baudrate: 300bps ~ 4Mbps (default: 115200bps)
- Autobauding baudrate: 9600bps ~ 115200bps
- Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
Specifications
| LTE Cat-1/3G/2G | |
|---|---|
| LTE Cat-1 | LTE-TDD: B38 / B40 / B41 |
| LTE-FDD: B1 / B3 / B5 / B7 / B8 / B20 | |
| 3G | UMTS / HSPA +: B1 / B5 / B8 |
| 2G | GSM / GPRS / EDGE: 900 / 1800 MHz |
| GNSS | |
| Receiver type | 16-channel |
| C/A Code | |
| Sensitivity | -159 dBm (GPS) / -158 dBm (GLONASS) / -159dBm (BeiDou) |
| Cold starts: -148 dBm | |
| Time-To-First-Fix (open air) | Cold starts: <35s |
| Hot starts: <1s | |
| SMS and Audio | |
| SMS | Supported types: MT, MO, CB, Text, PDU |
| Storage: USIM card and ME (default) | |
| Audio feature | Supports echo cancellation |
| Supports noise reduction | |
| Other | |
| Power supply | 5V |
| Operating voltage | 5V / 3.3V (configured via jumper) |
| Operating temperature | -30°C ~ 80°C |
| Storage temperature | -45°C ~ 90°C |
| Dimensions | 56.21mm × 65.15mm |
Standard Raspberry Pi 40PIN GPIO
Compatible with Raspberry Pi series boards, Jetson Nano
Dial-up on Windows/Linux
LTE Cat-1: up to 5Mbps (uplink) / up to 10Mbps (downlink) *
3G (HSPA+): up to 5.76Mbps (uplink) / up to 42Mbps (downlink) *
* stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc.
Cloud Communication
Supports communication protocols including TCP/UDP/FTP/FTPS/HTTP/HTTPS
GNSS positioning
Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
telephone call & SMS Support
Making telephone call or sending SMS by AT commands, with onboard audio jack
What's on board
- SIM7600E
- CP2102 USB to UART converter
- NAU8810 audio decoder
- TXS0108EPWR voltage translator
translates 3.3V/5V into 1.8V - MP2128DT power chip
- SPX29302 power chip
- Raspberry Pi GPIO header
- SIM7600 control interface
for connecting with host boards like Arduino/STM32 - SIM card slot
supports 1.8V/3V SIM card - TF card slot
for storing data like files, messages, etc. - 3.5mm earphone/mic jack
for audio actions like making telephone call - USB interface
for testing AT Commands, getting GPS positioning data, etc. - USB TO UART interface
for serial debugging, or login to Raspberry Pi
- MAIN antenna connector
- AUX antenna connector
- GNSS antenna connector
- Module power switch
- Network status indicator
- Power indicator
- Operating voltage selection jumper
configured via 0Ω resistor jumper
VCCIO - 3.3V: set operating voltage as 3.3V
VCCIO - 5V: set operating voltage as 5V - UART selection jumper
A: access Raspberry Pi via USB to UART
B: control the SIM7600 by Raspberry Pi
C: control the SIM7600 via USB to UART - PWR configuration jumper
PWR - 3V3: auto startup on power-up (default)
PWR - D6: startup/shutdown by the Raspberry Pi D6 pin
Flight mode configuration jumper
NC by default, no flight mode control pin
Flight - D4: flight mode is controlled by the Raspberry Pi D4 pin - USB connector solder pads
- BOOT forced programming solder pads
Pinout definition
Outline Dimensions
Resources & Services
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Selection Guide
| A7670E | A7600C1 | A7600E | SIM7600E | |
|---|---|---|---|---|
| Applicable regions | A7600C1: China A7670E / A7600E / SIM7600E: Europe, Southeast Asia, West Asia, Africa, China, South Korea |
|||
| Band | ||||
| LTE Cat-1 | LTE-FDD B1, B3, B5, B7, B8, B20 |
LTE-FDD B1, B3, B5, B8 LTE-TDD B34, B38, B39, B40, B41 |
LTE-FDD B1, B3, B5, B7, B8, B20 LTE-TDD B38, B40 |
LTE-FDD B1, B3, B5, B7, B8, B20 LTE-TDD B38, B40, B41 |
| 3G | N/A | UMTS/HSPA+ B1, B5, B8 |
||
| 2G | GSM/GPRS/EDGE 900/1800 MHz |
|||
| GNSS | N/A | GPS/Beidou/GLONASS/GALILEO/QZSS | ||
| Data Rate | ||||
| LTE Cat-1 | 10Mbps(DL)/5Mbps(UL) | |||
| 3G (HSPA+) | N/A | 42Mbps(DL)/5.76Mbps(UL) | ||
| 2G (GPRS/EDGE) | 236.8Kbps(DL/UL) | |||
| Software Features | ||||
| Network protocol | TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS | |||
| Dial-up protocol | PPP/RNDIS | PPP/NDIS/RNDIS | ||
| USB driver | Windows XP/7/8/10, Linux (driver free for Raspbian) | |||
| Hardware Interfaces | ||||
| SIM card slot | Compatible with 1.8V and 3V SIM card | |||
| UART | Supports AT commands through UART, compatible with 3.3V/5V operating voltage | |||
| USB port | Supports AT commands testing, network communication, firmware upgrading, etc. | |||
| USB to UART | N/A | Supports serial debugging, or login to Raspberry Pi | ||
| Audio jack | Supports audio actions like making telephoto call | |||
| Antenna connector | LTE main antenna | LTE main antenna + LTE diversity antenna + GNSS antenna | ||
| Dimensions | 65 × 30.5mm | 65 × 56.0mm | ||
| Applications | ||||
| Examples | Healthcare, smart payment, Internet talk, environmental monitoring, energy monitoring, fleet management, smart industry, intelligent agriculture, etc. | |||
Weight: 0.25 kg
Quick Overview
- SIM7600E LTE Cat-1 HAT x1
- LTE Antenna x1
- GPS External Antenna (B) x1
- USB-A to Micro-B cable x2
- RPi screws pack (2pcs) x1
1
2
3
4
5
