Details
Embedded with ST7789V2 Display Driver, Supports 90° Hardware Rotation

- Processor
LX7 Dual-core Processor
- Wi-Fi
2.4GHz Wi-Fi
- Bluetooth
BLE 5
- Antenna
Onboard Antenna
- Power Supply
Type-C Port
- Size
1.3″
- Resolution
240 × 240
- Display Color
262K Color
- Interface
SPI
- Driver
ST7789
- Viewing Angle
160°
- Display Panel
IPS
- Card Slot
TF Card Slot
- Sensor
QMI8658 6-Axis IMU
- Serial Chip
CH343P
The ESP32-S3-LCD-1.3 is a low-cost, high-performance MCU board equipped with 240MHz dual-core processor. It is compact in size, with onboard 1.3inch 262K color LCD display, Lithium battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RGB LCD, and Wi-Fi / Bluetooth antenna, which makes it easy for you to develop and integrate it into products quickly.
- Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
- Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
- Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory
- Type-C connector, keeps it up to date, easier to use
- Onboard 1.3inch 240×240 pixels 262K display for clear and colorful pictures
- Built-in ST7789V2 display driver, using SPI communication, effectively saving the IO resources
- Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures and other applications
- Onboard 3.7V MX1.25 lithium battery recharge / discharge header
- Adapting 13PIN 2.54mm GPIO header for connecting peripherals and debugging, supports flexible configuration of pin functions
- Optional for prism cube to enhance the optical display effect and greater expandability

ESP32-S3-LCD-1.3
Standard version

ESP32-S3-LCD-1.3-B
With plastic case

ESP32-S3-LCD-1.3-C
With plastic case and prism cube
Colorful display effect

6-Axis IMU enhances playability
The display effect with prism cube


- ESP32-S3R8
Dual-core processor, up to 240MHz operating frequency - Onboard ceramic antenna
- 16MB Flash
- TF card slot
- Charge indicator
off when fully charged
- PL4054 battery recharge manager
- ME6217C33M5G
Low dropout regulator, 800mA output (Max.) - MX1.25 battery header
- QMI8658 (back side)
6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer
Standard version

With plastic case

With plastic case and prism cube

Model | display | onboard resources | Peripheral interfaces | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
pixels | Interface | Display | Touch | IMU | RTC | TF | Buzzer | Speaker | mic | battery header | antenna | ||||
AMOLED display | |||||||||||||||
![]() ESP32-S3-Touch-AMOLED-2.41 |
600 × 450 | QSPI | RM690B0 | FT6336 | √ | √ | √ | - | - | - | √ | √ | I2C, UART, USB, 34PIN GPIO header | ||
![]() ESP32-S3-Touch-AMOLED-2.41-B |
600 × 450 | QSPI | RM690B0 | FT6336 | √ | √ | √ | - | - | - | √ | √ | I2C, UART, USB, 34PIN GPIO header, with case | ||
![]() ESP32-S3-Touch-AMOLED-1.91 |
240 × 536 | QSPI | RM67162 | FT3168 | √ | - | √ | - | - | - | √ | √ | 40PIN header | ||
![]() ESP32-S3-AMOLED-1.91 |
240 × 536 | QSPI | RM67162 | - | √ | - | √ | - | - | - | √ | √ | 40PIN header | ||
![]() ESP32-S3-Touch-AMOLED-1.8 |
368 × 448 | QSPI | SH8601 | FT3168 | √ | √ | √ | - | √ | √ | √ | √ | I2C, UART, GPIO pads | ||
![]() ESP32-S3-Touch-AMOLED-1.43 |
466 × 466 | QSPI | SH8601/C05300 | FT3168 | √ | √ | √ | - | - | - | √ | √ | I2C, UART, USB, 2 × 14PIN headers | ||
![]() ESP32-S3-Touch-AMOLED-1.43-B |
466 × 466 | QSPI | SH8601/C05300 | FT3168 | √ | √ | √ | - | - | - | √ | √ | I2C, UART, USB, 2 × 14PIN headers | ||
LCD display | |||||||||||||||
![]() ESP32-S3-Touch-LCD-2.8 |
240 × 320 | SPI | ST7789 | CST328 | √ | √ | √ | - | √ | - | √ | √ | I2C, UART, SH1.0 12PIN header | ||
![]() ESP32-S3-LCD-2.8 |
240 × 320 | SPI | ST7789 | - | √ | √ | √ | - | √ | - | √ | √ | I2C, UART, SH1.0 12PIN header | ||
![]() ESP32-S3-LCD-2.8B |
480 × 640 | SPI | ST7701 | - | √ | √ | √ | √ | - | - | √ | √ | 20PIN header | ||
![]() ESP32-S3-Touch-LCD-2.8B |
480 × 640 | SPI | ST7701 | GT911 | √ | √ | √ | √ | - | - | √ | √ | 20PIN header | ||
![]() ESP32-S3-LCD-2.8C |
480 × 480 | RGB | ST7701 | - | √ | √ | √ | √ | - | - | √ | √ | I2C, UART, SH1.0 12PIN header | ||
![]() ESP32-S3-Touch-LCD-2.8C |
480 × 480 | RGB | ST7701 | GT911 | √ | √ | √ | √ | - | - | √ | √ | I2C, UART, SH1.0 12PIN header | ||
![]() ESP32-S3-Touch-LCD-2.1 |
480 × 480 | RGB | ST7701 | CST820 | √ | √ | √ | √ | - | - | √ | √ | I2C, UART, SH1.0 12PIN header | ||
![]() ESP32-S3-Touch-LCD-2.1B |
480 × 480 | RGB | ST7701 | CST820 | √ | √ | √ | √ | - | - | √ | √ | I2C, UART, SH1.0 12PIN header | ||
![]() ESP32-S3-Touch-LCD-2 |
240 × 320 | SPI | ST7789T3 | CST816 | √ | - | √ | - | - | - | √ | √ | 28PIN header, camera interface | ||
![]() ESP32-S3-LCD-2 |
240 × 320 | SPI | ST7789T3 | - | √ | - | √ | - | - | - | √ | √ | 28PIN header, camera interface | ||
![]() ESP32-S3-Touch-LCD-1.85C |
360 × 360 | QSPI | ST77916 | CST816 | - | √ | √ | - | √ | √ | √ | √ | I2C, UART, 2×14PIN header (1.27mm pitch) | ||
![]() ESP32-S3-Touch-LCD-1.85C-BOX |
360 × 360 | QSPI | ST77916 | CST816 | - | √ | √ | - | √ | √ | √ | √ | I2C, UART, 2×14PIN header (1.27mm pitch) | ||
![]() ESP32-S3-Touch-LCD-1.85 |
360 × 360 | QSPI | ST77916 | CST816 | √ | √ | √ | - | √ | √ | √ | √ | I2C, UART, GPIO pads | ||
![]() ESP32-S3-LCD-1.85 |
360 × 360 | QSPI | ST77916 | - | √ | √ | √ | - | √ | √ | √ | √ | I2C, UART, GPIO pads | ||
![]() ESP32-S3-Touch-LCD-1.69 |
240 × 280 | SPI | ST7789 | CST816 | √ | √ | - | √ | - | - | √ | √ | I2C, UART, GPIO pads | ||
![]() ESP32-S3-LCD-1.69 |
240 × 280 | SPI | ST7789 | - | √ | √ | - | √ | - | - | √ | √ | SH1.0 12PIN header | ||
![]() ESP32-S3-LCD-1.47 |
172 × 320 | SPI | ST7789 | - | - | - | √ | - | - | - | - | √ | 18PIN header | ||
![]() ESP32-C6-LCD-1.47 |
172 × 320 | SPI | ST7789 | - | - | - | √ | - | - | - | - | √ | 18PIN header | ||
![]() ESP32-S3-Touch-LCD-1.46B |
412 × 412 | QSPI | SPD2010 | SPD2010 | √ | √ | √ | - | √ | √ | √ | √ | 20pin GPIO header | ||
![]() ESP32-S3-Touch-LCD-1.46 |
412 × 412 | QSPI | SPD2010 | SPD2010 | √ | √ | √ | - | √ | √ | √ | √ | 20pin GPIO header | ||
![]() ESP32-S3-LCD-1.3 |
240 × 240 | SPI | ST7789 | - | √ | - | √ | - | - | - | √ | √ | 2.54mm 13PIN header | ||
![]() ESP32-S3-LCD-1.3-B |
240 × 240 | SPI | ST7789 | - | √ | - | √ | - | - | - | √ | √ | 2.54mm 13PIN header, with case | ||
![]() ESP32-S3-LCD-1.3-C |
240 × 240 | SPI | ST7789 | - | √ | - | √ | - | - | - | √ | √ | 2.54mm 13PIN header, with case and prism cube | ||
![]() ESP32-S3-Touch-LCD-1.28 |
240 × 240 | SPI | GC9A01A | CST816 | √ | - | - | - | - | - | √ | √ | SH1.0 12PIN header | ||
![]() ESP32-S3-LCD-1.28 |
240 × 240 | SPI | GC9A01A | - | √ | - | - | - | - | - | √ | √ | 2 × 20PIN header (1.27mm pitch) | ||
![]() ESP32-C3-LCD-0.71 |
160 × 160 | SPI | GC9D01 | - | - | - | - | - | - | - | √ | √ | 12PIN GPIO pads | ||
![]() ESP32-S3-GEEK |
240 × 135 | SPI | GC9A01A | - | - | - | √ | - | - | - | - | √ | I2C, UART, GPIO |