- Description
- Package Content
Details
240 MHz Xtensa single-core 32-bit LX7 microcontroller
for C/C++ SDK, MicroPython, CircuitPython development
![](/img/devkit/ESP32-S2-Pico/ESP32-S2-Pico-details-1.jpg)
optional LCD / pinheader
![](/img/devkit/ESP32-S2-Pico/ESP32-S2-Pico-details-3.jpg)
This is a WiFi development board with compact size, plenty peripheral interfaces, integrated low-power Wi-Fi System-on-Chip (SoC) and mass memory, supporting Raspberry Pi Pico expansion board ecosystem. Equipped with hardware crypto accelerator, RNG, HMAC and Digital Signature module, it can meet the security requirements of the Internet of Things. Multiple low-power operating states to satisfy power requirements in IoT, mobile devices, wearable electronics, smart home and other application scenarios, etc.
ESP32-S2 Standard Ver. key features include:
- Support Raspberry Pi Pico expansion board ecosystem to satisfy creative IoT application development
- Xtensa single-core 32-bit LX7 microprocessor, ESP32-S2FH4, support clock frequency up to 240 MHz
- Integrated 320KB SRAM, 128KB ROM, 8MB PSRAM, 4MB Flash memory
- Support IEEE802.11 b/g/n, on-board 2.4 GHz WiFi ceramic antenna, up to 150 Mbps data transfer rate
- USB-C connector, no more plug orientation problem
- On-chip integrated full-speed USB OTG interface, LCD interface (8-bit serial RGB/8080/6800), TWAI controller (ISO11898-1 compatible), capacitive sensor GPIO, temperature sensor and RMT (TX/RX)
- Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current
- Support a variety of low-power operating states for adjusting the optimal balance between communication distance, data rate and power consumption, to meet the power requirements of various application scenarios
- Castellated module allows soldering direct to user-designed carrier boards
ESP32-S2 LCD Ver. key features include:
- All features of the ESP32-S2 Standard Ver.
- On-board 0.96inch 160×80 pixels 65K color IPS LCD display
- On-board single 3.7V lithium battery charge/discharge header, suitable for mobile IoT product design
Comprehensive SDK, dev resources, tutorials to help you easily get started
![](/img/devkit/ESP32-S2-Pico/ESP32-S2-Pico-details-5.jpg)
Xtensa single-core 32-bit LX7 microprocessor, up to 240 MHz frequency
![](/img/devkit/ESP32-S2-Pico/ESP32-S2-Pico-details-7.jpg)
configurable pin function, allows flexible development and integration
ESP32-S2 Standard Ver. Pinout
![](/img/devkit/ESP32-S2-Pico/ESP32-S2-Pico-details-9-1.jpg)
ESP32-S2 LCD Ver. Pinout
![](/img/devkit/ESP32-S2-Pico/ESP32-S2-Pico-details-9-2.jpg)
ESP32-S2 Standard Ver. Resources
![](/img/devkit/ESP32-S2-Pico/ESP32-S2-Pico-details-intro-1.jpg)
- ESP32-S2FH4
Xtensa single-core 32-bit LX7 microprocessor - APS6404L-3SQR-SN
8MB PSRAM - BOOT button
BOOT button, press BOOT and then RESET button to enter download mode - RESET button
- MP28164
high efficiency DC-DC buck-boost chip
- WS2812B
user RGB LED (not power indicator) - USB Type-C connector
for programming, serial printing, etc. - Pinout
compatible with Raspberry Pi Pico - USB test points
connecting to USB interface - BOOT test point
connecting to BOOT button - WiFi ceramic antenna
ESP32-S2 LCD Ver. Resources
![](/img/devkit/ESP32-S2-Pico/ESP32-S2-Pico-details-intro-2.jpg)
- ESP32-S2FH4
Xtensa single-core 32-bit LX7 microprocessor - APS6404L-3SQR-SN
8MB PSRAM - MP28164
high efficiency DC-DC buck-boost chip - ETA6096
high efficiency Lithium battery recharge manager - Battery header
MX1.25 header, for 3.7V Lithium battery charging/discharging
- WiFi ceramic antenna
- Pinout
compatible with Raspberry Pi Pico - USB Type-C connector
for programming, serial printing, etc. - BOOT button
BOOT button, press BOOT and then RESET button to enter download mode - RESET button
- 0.96inch IPS LCD
160×80 resolution, 65K colors
![](/img/devkit/ESP32-S2-Pico/ESP32-S2-Pico-details-size.jpg)
![](/img/devkit/LCD/common/res_banner.png)
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Weight: 0.007 kg
Quick Overview
ESP32-S2-Pico
- ESP32-S2-Pico (Standard Ver.) x1
![ESP32-S2-Pico](/img/devkit/ESP32-S2-Pico/ESP32-S2-Pico-details-pack.jpg)
ESP32-S2-Pico-M
- ESP32-S2-Pico-M (Standard Ver. with pinheader) x1
![ESP32-S2-Pico-M](/img/devkit/ESP32-S2-Pico-M/ESP32-S2-Pico-M-details-pack.jpg)
ESP32-S2-LCD-0.96
- ESP32-S2-LCD-0.96 (LCD Ver.) x1
![ESP32-S2-LCD-0.96](/img/devkit/ESP32-S2-LCD-0.96/ESP32-S2-LCD-0.96-details-pack.jpg)
ESP32-S2-LCD-0.96-M
- ESP32-S2-LCD-0.96-M (LCD Ver. with pinheader) x1
![ESP32-S2-LCD-0.96-M](/img/devkit/ESP32-S2-LCD-0.96-M/ESP32-S2-LCD-0.96-M-details-pack.jpg)