- Description
- Package Content
Details
DC Motor Driver Module for Raspberry Pi Pico, driving up to 4x DC motors
DC Motor Driver Module for Pico
suitable for 2WD or 4WD driving
![](/img/devkit/accBoard/Pico-Motor-Driver/Pico-Motor-Driver-details-1.jpg)
Features at a glance
- Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
- I2C controlled, supports 32x different I2C addresses by setting the 5 address jumpers
- Onboard PCA9685 chip, provides 12-bit hardware PWM to adjust motor speed
- Onboard TB6612FNG dual H-bridge motor driver, high efficiency, low heating
- Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal
- Breakout unused pins of Pico for easy extension
- Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Specifications
Operating voltage | 6~12V (VIN terminals) | Logic level | 3.3V |
---|---|---|---|
PWM driver | PCA9685 | Motor driver | TB6612FNG |
Control interface | I2C | Dimensions | 65 × 56mm |
Raspberry Pi Pico header compatibility
onboard female pin header for direct attaching to Raspberry Pi Pico
![](/img/devkit/accBoard/Pico-Motor-Driver/Pico-Motor-Driver-details-3.jpg)
Onboard 5V regulator
![](/img/devkit/accBoard/Pico-Motor-Driver/Pico-Motor-Driver-details-7.jpg)
Pinout definition
![](/img/devkit/accBoard/Pico-Motor-Driver/Pico-Motor-Driver-details-inter.jpg)
Outline dimensions
![](/img/devkit/accBoard/Pico-Motor-Driver/Pico-Motor-Driver-details-size.jpg)
Resources & Services
![](/img/devkit/LCD/common/res_banner.png)
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Weight: 0.027 kg
Quick Overview
- Pico-Motor-Driver x1
1![](/img/devkit/accBoard/Pico-Motor-Driver/Pico-Motor-Driver-3_220.jpg)
![](/img/devkit/accBoard/Pico-Motor-Driver/Pico-Motor-Driver-3_220.jpg)