CP2102 USB UART Board (Type C), USB To TTL (UART) Communication Module, USB-C Connector

SKU:20644
Part No.:CP2102 USB UART Board (Type C)
Brand:Waveshare

$5.59
PriceQuantity
$5.192+
$4.993+
$4.914+
Related Products:
Description

Details

CP2102 USB To UART (TTL) Communication Module, USB-C Connector
CP2102 USB-C To UART Module

adopts CP2102, compatible with 3.3V logic level

Features at a glance
  • Supports Mac OS, Linux, Android, WinCE, Windows 7/8/10/11...
  • Voltage output support: 5V or 3.3V
  • Integrated USB protection device: SP0503
  • 3x LED indicators: TXD LED, RXD LED, POWER LED
  • Pins accessible on pinheaders: TXD, RXD, RTS, CTS
  • Other pins are accessible on drilled holes, easily connected to user application system (the pin pitch is compatible with universal prototype board)
CP2102 solution
  • Single-Chip USB to UART Data Transfer
    • No external resistors required, no external crystal required
    • On-chip power-on reset circuit and voltage regulator
    • Integrated 1024-Byte EEPROM
  • USB Function Controller
    • USB Specification 2.0 compliant; full-speed (12 Mbps)
    • USB suspend state, supported via SUSPEND pins
  • UART
    • All handshaking and modem interface signals
    • Data formats:
      • Data bits: 5, 6, 7, 8
      • Stop bits: 1, 1.5, 2
      • Parity: odd, even, no parity
    • Baudrates: 300bps to 1Mbps
    • 576 byte receiving buffer; 640 byte transmitting buffer
    • Hardware or X-On/X-Off handshaking support
    • Event character support
  • Virtual COM Port Device Drivers
    • Windows 8/7/Vista/Server 2003/XP/2000
    • MAC OS-X/OS-9
    • Linux 2.40 or higher
  • USBXpress Direct Driver Support
    • Windows 7/Vista/Server 2003/XP/2000
    • Windows CE
  • Temperature Range
    • –40 to +85 °C
Hardware connection

In the case of working with MCU

  • VCCIO: 3.3V or 5V output (the module is powered from USB, and the onboard jumper should be shorted to 3.3V or 5V)
  • GND: connects to GND
  • TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX)
  • RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX)
  • RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS)
  • CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS)
CAUTION: the module is compatible with TTL level ONLY, to avoiding any damage, please DON'T direct connect it to RS232 circuit.
Outline Dimensions
Resources & Services

Weight: 0.011 kg

Quick Overview

  1. CP2102 USB UART Board (Type C) x1
  2. 6-pin custom connector jumper wire x1
  3. 4-pin male pinheader & 4-pin female pinheader x2
1
2
3