Open407V-D Standard, STM32F4 Development Board

SKU:5866
Part No.:Open407V-D Standard
Brand:Waveshare

¥4,568 DISCONTINUED

PriceQuantity
¥4,4312+
¥4,3553+
¥4,3094+

Description
Package Content

Details

STM32 development board designed for the ST official tool STM32F4DISCOVERY, and integrates various standard interfaces, pretty easy for peripheral expansions.

Overview

Open407V-D is an STM32 development board designed for the ST official tool STM32F4DISCOVERY, which features the STM32F407VGT6 microcontroller onboard.

The Open407V-D supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32F4 series microcontrollers.

What's on the mother board

STM32F407VGT6 development board on board resource

STM32F4DISCOVERY socket: for easily connecting the STM32F4DISCOVERY
USART2 interface: easily connects to RS232, RS485, USB TO 232, etc.
SPI1/SPI2 + AD/DA interface
- easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.
- SPI1 features AD/DA alternative function, supports connecting AD/DA module as well
CAN1 interface: communicates with accessory boards which feature the CAN device conveniently
CAN2 interface: communicates with accessory boards which feature the CAN device conveniently
I2C1/I2C2 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), FRAM (FM24CLxx), etc.
I2S2 / I2S3 / I2C1: for connecting I2S peripherals, such as Audio module
DCMI interface: for connecting camera module
SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI
FSMC + SPI interface (16-bit FSMC + SPI): for connecting touch screen LCD
FSMC interface (8-bit FSMC): easily connects to peripherals such as NandFlash, Ethernet, etc.
USART3 interface: easily connects to RS232, RS485, USB TO 232, etc.
ULPI interface: for connecting high-speed USB peripheral (the STM32F407V integrates USB HS controller without any PHY device)
Ethernet interface: easily connects the MCU to ethernet network by using an additional ethernet module
5V DC jack
5V/3.3 V power input/output: usually used as power output, also common-grounding with other user board
MCU pins connector: all the MCU pins are accessible on expansion connectors for further expansion
JTAG/SWD interface: for debugging/programming
SD Card Detect jumper
Joystick jumper
- short the jumper to connect the joystick to default I/Os used in example code
- open the jumper to connect the joystick to custom I/Os via jumper wires
Boot mode switch: for configuring BOOT0 pin
LCD backlight adjustment enable jumper
- short the jumper to enable LCD backlight adjustment
- open the jumper to disable, and set free the I/O port
AMS1117-3.3: 3.3V voltage regulator
Power supply switch: 5V DC on/off switch
Power indicator
Joystick: five positions

What's on the STM32F4DISCOVERY

STM32F407VGT6 microcontroller featuring 32-bit ARM Cortex-M4F core, 1 MB Flash, 192 KB RAM in an LQFP100 package
On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
Board power supply: through USB bus or from an external 5 V supply voltage
External application power supply: 3 V and 5 V
LIS302DL, ST MEMS motion sensor, 3-axis digital output accelerometer
MP45DT02, ST MEMS audio sensor, omni-directional digital microphone
CS43L22, audio DAC with integrated class D speaker driver
Eight LEDs:
- LD1 (red/green) for USB communication
- LD2 (red) for 3.3 V power on
- Four user LEDs, LD3 (orange), LD4 (green), LD5 (red) and LD6 (blue)
- 2 USB OTG LEDs LD7 (green) VBus and LD8 (red) over-current
Two push buttons (user and reset)
USB OTG FS with micro-AB connector
Extension header for all LQFP100 I/Os for quick connection to prototyping board and easy probing