- Description
Details
Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian.
SIM7000E is mainly applicable in Europe, Africa, Australia, Southeast Asia, SIM7000C is mainly applicable in Asia-Pacific region.
Please check the supported bands according to your local service provider, select the proper one when placing order.
Please check the supported bands according to your local service provider, select the proper one when placing order.
SIM7000E NB-IoT / Cat-M / EDGE / GPRS HAT for Raspberry Pi, GNSS positioning, for Europe, Africa, Australia, Southeast Asia
NB-IoT / Cat-M / GPRS / GNSS HAT
Low power narrow band cellular IoT communication module for Raspberry Pi
Based on SIM7000E
This is a telecommunication HAT for Raspberry Pi which supports NB-IoT, Cat-M, EDGE, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.
Features at a glance
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.
- Supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
- Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor
- SIM card slot, compatible with both normal SIM card and NB-IoT specific card
- 2x LED indicators, easy to monitor the working status
- Baudrate: 300bps~3686400bps
- Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
| NB-IoT / Cat-M / 2G | |
|---|---|
| Band | NB-IoT/Cat-M: FDD-LTE B3/B8/B20/B28 |
| GPRS/EDGE: 900/1800 MHz | |
| Data rate | NB-IoT: 34(DL)/66(UL) |
| Cat-M: 300(DL)/375(UL) | |
| EDGE: 236.8(DL)/236.8(UL) | |
| GPRS: 85.6(DL)/85.6(UL) | |
| SIM card support | NB-IoT: NB Specific (Not Included) |
| Cat-M/GPRS/EDGE: Normal SIM (Not Included) | |
| Applicable region | Europe, Africa, Australia, Southeast Asia |
| GNSS | |
| Satellite systems | GPS, BeiDou, GLONASS, Galileo |
| Receiver type | 16-channel |
| C/A Code | |
| Sensitivity | Tracking: -162 dBm (GPS) / -157 dBm (GLONASS) / TBD (BD) |
| Cold starts: -148 dBm | |
| Time-To-First-Fix | Cold starts: <35s |
| Hot starts: <1s | |
| Accuracy | Position: <2.5m CEP |
| Other | |
| Power supply | 5V |
| Operating voltage | 5V / 3.3V (3.3V by default) |
| Sleep Mode current | 1.2mA (@DRX=2.56s) |
| Power Save Mode current | 9uA |
| Operating temperature | -40°C ~ 85°C |
| Storage temperature | -45°C ~ 90°C |
| Dimensions | 30.2mm x 65mm |
Standard Raspberry Pi 40PIN GPIO
Compatible with Raspberry Pi series boards
NB-IoT / Cat-M / EDGE / GPRS support
Cloud Communication
Supports communication protocols including
TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail...
GNSS positioning
Supports GPS, BeiDou, GLONASS, Galileo positioning
What's on board
- SIM7000E
- SPX29302 power chip
- RT9193-33 power chip
- Raspberry Pi GPIO header
for connecting with Raspberry Pi - USB interface
for testing AT Commands, getting GPS positioning data, etc. - SIM7000E control interface
for connecting with host boards like Arduino/STM32 - SIM card slot
supports 1.8V/3V SIM card - GNSS antenna connector
- LTE antenna connector
- Network status indicator
- Power indicator
- Operating voltage selection jumper
configured via 0Ω resistor jumper
A: set operating voltage as 5V
B: set operating voltage as 3.3V (default) - DTR configuration jumper
configured via 0Ω resistor jumper
A: DTR is controlled by the Raspberry Pi P26 pin
B: NC (default) - PWR configuration jumper
configured via 0Ω resistor jumper
A: startup/shutdown by the Raspberry Pi P4 pin
B: auto startup on power-up (default)
Pinout definition
Outline Dimensions
Resources & Services
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Selection Guide
| Cat-M & NB-IoT & GSM | Cat-M & NB-IoT | NB-IoT | ||||
|---|---|---|---|---|---|---|
| SIM7000C / SIM7000E | SIM7000G | SIM7070G | SIM7080G | SIM7020C / SIM7020E | SIM7028 | |
| Applicable regions | SIM7000C: China SIM7000E: Europe / Africa / Australia / Southeast Asia |
Global | SIM7020C: China SIM7020E: Europe / Africa / Australia / Southeast Asia |
Global | ||
| Band | ||||||
| NB-IoT | SIM7000C: LTE-FDD: B1, B3, B5, B8 SIM7000E: LTE-FDD: B3, B8, B20, B28 |
B1, B2, B3, B4, B5, B8, B12, B13, B17, B18, B19, B20, B25, B26, B28 | B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66, B71, B85 | SIM7020C: LTE-FDD: B1, B3, B5, B8 SIM7020E: LTE-FDD: B1, B3, B5, B8, B20, B28 |
B1, B2, B3, B4, B5, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B66, B70, B85 | |
| Cat-M | B1, B2, B3, B4, B5, B8, B12, B13, B17, B18, B19, B20, B25, B26, B28, B39 | B1, B2, B3, B4, B5, B8, B12, B13, B14, B18, B19, B20, B25, B26, B27, B28, B66, B85 | N/A | |||
| GSM | GPRS/EDGE 900/1800 MHz | GSM/GPRS/EDGE 850/900/1800/1900MHz | N/A | N/A | ||
| GNSS | SIM7000C/SIM7000G: GPS, GLONASS, BeiDou SIM7000E/SIM7070G/SIM7080G: GPS, GLONASS, BeiDou, Galileo | N/A | ||||
| Data Rate | ||||||
| NB-IoT(Kbps) | 34(DL)/66(UL) | 136(DL)/150(UL) | 26.15(DL)/62.5(UL) | 127(DL)/159(UL) | ||
| Cat-M(Kbps) | 300(DL)/375(UL) | 589(DL)/1119(UL) | ||||
| EDGE(Kbps) | 236.8(DL)/236.8(UL) | 236.8(DL)/236.8(UL) | ||||
| GPRS(Kbps) | 85.6(DL)/85.6(UL) | 85.6(DL)/85.6(UL) | ||||
| Software Features | ||||||
| Network protocol | TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT, etc. | |||||
| Firmware upgrade | USB | UART | UART/USB | |||
| Hardware Interfaces | ||||||
| SIM card slot | 1.8V/3V | 1.8V | 1.8V | 1.8V/3V | 1.8V/3V | |
| UART | Supports AT commands | Supports AT commands, firmware upgrading | ||||
| USB | Supports AT commands testing, GPS positioning, firmware upgrading, etc. | For external power supply ONLY | Supports AT commands, firmware upgrading | |||
| Antenna connector | LTE antenna (SMA) + GNSS antenna (IPEX) | LTE antenna (IPEX) + GNSS antenna (IPEX) | LTE antenna (SMA) | |||
| Applications | ||||||
| Examples | Meters, remote control, smart home, smart city, intelligent agriculture, and so on | |||||
Weight: 0.132 kg
Quick Overview
- SIM7000E NB-IoT HAT x1
- GSM Antenna x1
- GPS External Antenna (B) x1
- USB-A to Micro-B cable x1
- Standoffs pack x1
1
2
3
4
5
