- Description
- Package Content
Details
For different regions, we provide multiple LTE Cat-4/Cat-1 HATs to choose from:
SIM7600A-H 4G HAT | LTE Cat-4 | mainly applicable in North America (US, CA) |
SIM7600E-H 4G HAT | LTE Cat-4 | mainly applicable in Europe, Southeast Asia, West Asia, Africa, China, South Korea |
SIM7600E LTE Cat-1 HAT | LTE Cat-1 | |
A7670E Cat-1 HAT | ||
A7600E Cat-1/GSM/GPRS HAT | ||
SIM7600SA-H 4G HAT | LTE Cat-4 | mainly applicable in Australia, New Zealand, Taiwan (China), Latin America |
SIM7600CE 4G HAT | LTE Cat-4 | mainly applicable in China, and some Southeast Asia countries |
SIM7600CE-CNSE 4G HAT | ||
SIM7600CE-JT1S 4G HAT | ||
A7600C1 Cat-1/GSM/GPRS HAT | LTE Cat-1 | |
SIM7600G-H 4G HAT | LTE Cat-4 | the global version |
Please check the supported bands according to your local service provider, select the proper one when placing order.
enabling 4G / 3G / 2G communication & LBS positioning
Based on SIM7600CE-JT1S
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
- Supports LBS base station positioning
- Onboard USB interface, for testing AT Commands, establishing network connection, and so on
- Onboard CP2102 USB to UART converter, for serial debugging
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- SIM card slot, supports 1.8V/3V SIM card
- TF card slot for storing data like files, messages, etc.
- Onboard audio jack and audio decoder for making telephone call
- 2x LED indicators, easy to monitor the working status
- Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
- Baudrate: 300bps ~ 4Mbps (default: 115200bps)
- Autobauding baudrate: 9600bps ~ 115200bps
- Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Frequency band | |
---|---|
LTE Cat-4 | LTE-FDD: B1/B3/B5/B8 LTE-TDD: B38/B39/B40/B41 |
3G | TD-SCDMA:B34, B39 UMTS/HSDPA/HSPA+: B1, B8 CDMA: 1X/EVDO BC0 |
2G | GSM/GPRS/EDGE: 900/1800 MHz |
SMS and Audio | |
SMS | Supported types: MT, MO, CB, Text, PDU |
Storage: USIM card and ME (default) | |
Audio feature | Supports echo cancellation |
Supports noise reduction | |
Others | |
Power supply | 5V |
Operating voltage | 5V / 3.3V (configured via jumper) |
Operating temperature | -30°C ~ 80°C |
Storage temperature | -45°C ~ 90°C |
Dimensions | 56.01mm × 65.00mm |
Compatible with Raspberry Pi series boards, Jetson Nano
LTE Cat-4: up to 50Mbps (uplink) / up to 150Mbps (downlink) *
3G (HSPA+): up to 5.76Mbps (uplink) / up to 42Mbps (downlink) *
* stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc.
Supports communication protocols including TCP/UDP/FTP/FTPS/HTTP/HTTPS
Making telephone call or sending SMS by AT commands, with onboard audio jack
- SIM7600CE-JT1S
- CP2102 USB to UART converter
- NAU8810 audio decoder
- TXS0108EPWR voltage translator
- translates 3.3V/5V into 1.8V
- MP2128DT power chip
- SPX29302 power chip
- Raspberry Pi GPIO header
- for connecting with Raspberry Pi
- SIM7600 control interface
- for connecting with host boards like Arduino/STM32
- SIM card slot
- supports 1.8V/3V SIM card
- TF card slot
- for storing data like files, messages, etc.
- 3.5mm earphone/mic jack
- for audio actions like making telephone call
- USB interface
- for testing AT Commands, and so on
- USB TO UART interface
- for serial debugging, or login to Raspberry Pi
- MAIN antenna connector
- Module power switch
- Network status indicator
- Power indicator
- UART selection jumper
- A: access Raspberry Pi via USB to UART
- B: control the SIM7600 by Raspberry Pi
- C: control the SIM7600 via USB to UART
- PWR selection jumper
- PWR - 3V3: auto startup on power-up
- PWR - D6: startup/shutdown by the Raspberry Pi D6 pin
- Flight mode selection jumper
- NC by default, no flight mode control pin
- Flight - D4: flight mode is controlled by the Raspberry Pi D4 pin
- Operating voltage selection jumper
- VCCIO - 3.3V: set operating voltage as 3.3V
- VCCIO - 5V: set operating voltage as 5V
- USB connector solder pads
- BOOT forced programming solder pads
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
SIM7600CE-JT1S | SIM7600CE-T | SIM7600E | SIM7600E-H | SIM7600A-H | SIM7600G-H | |
---|---|---|---|---|---|---|
Applicable regions | China | Europe/Southeast Asia/West Asia/Africa/China/South Korea | North America | Global | ||
Band | ||||||
LTE Cat-4 | LTE-FDD B1/B3/B5/B8 LTE-TDD B38/B39/B40/B41 |
LTE-FDD B1/B3/B5/B7/B8/B20 LTE-TDD B38/B40/B41 |
LTE-FDD B2/B4/B12 |
LTE-FDD B1/B2/B3/B4/B5/B7 /B8/B12/B13/B18/B19 /B20/B25/B26/B28/B66 LTE-TDD B34/B38 /B39/B40/B41 |
||
3G | UMTS/HSDPA/HSPA+ B1/B8 TD-SCDMA B34/B39 CDMA 1X/EVDO BC0 |
UMTS/HSPA+ B1/B5/B8 |
UMTS/HSPA+ B2/B5 |
UMTS/HSDPA/HSPA+ B1/B2/B4/B5/B6/B8/B19 |
||
2G | GSM/GPRS/EDGE 900/1800 MHz |
N/A | GSM/GPRS/EDGE 850/900/1800/1900MHz |
|||
GNSS | N/A | GPS/Beidou/GLONASS/GALILEO/QZSS | ||||
Data Rate | ||||||
LTE Cat-4 | 150Mbps(DL)/50Mbps(UL) | N/A | 150Mbps(DL)/50Mbps(UL) | |||
LTE Cat-1 | N/A | 10Mbps(DL) /5Mbps(UL) |
N/A | |||
3G (HSPA+) | 42Mbps(DL)/5.76Mbps(UL) | |||||
2G (EDGE) | 236.8Kbps(DL/UL) | N/A | 236.8Kbps(DL/UL) | |||
2G (GPRS) | 85.6Kbps(DL/UL) | N/A | 85.6Kbps(DL/UL) | |||
Software Features | ||||||
Network protocol | TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS | |||||
Dial-up protocol | PPP/NDIS/RNDIS | |||||
USB driver | Windows XP/7/8/10, Linux (driver free for Raspbian) | |||||
Hardware Interfaces | ||||||
SIM card slot | Compatible with 1.8V and 3V SIM card | |||||
UART | Supports AT commands through UART, compatible with 3.3V/5V operating voltage | |||||
USB port | Supports AT commands testing, network communication, firmware upgrading, etc. | |||||
USB to UART | Supports serial debugging, or login to Raspberry Pi | |||||
Audio jack | Supports audio actions like making telephoto call | |||||
TF card slot | Yes, for storing data like files, messages, etc. | N/A | Yes | |||
Antenna connector | LTE main antenna | LTE main antenna + LTE diversity antenna + GNSS antenna | ||||
Applications | ||||||
Examples | Healthcare, smart payment, Internet talk, environmental monitoring, energy monitoring, fleet management, smart industry, intelligent agriculture, etc. |
Weight: 0.186 kg