Details
PCIe protocol, supports 5G high-speed networking
* for reference only, the Raspberry Pi 5 is NOT included.
- Comes with PCIe TO 5G HAT+
- Onboard M.2(NGFF) Key B slot, supports SIM82XX and RM5XX series 5G modules and is compatible with 3042/3052 packages
- Onboard PCIE connector, can be directly connected to Raspberry Pi 5 PCIe interface for 5G networking, supports Raspberry Pi OS and OpenWRT
- Onboard Type-C port for 5G networking of Raspberry Pi or PC via USB cable, firmware updating, or external power supply input
- HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion
- Onboard power monitoring chip for real-time measurement of voltage, current and power
- Onboard SIM card slot for NANO SIM card
- Onboard Reset button, power and network indicators for easy debugging and monitoring the operating status
- Provides options for 5G module, please refer to the module specifications and applicable region below to choose your 5G HAT kit before placing order
- Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation
Tested to support multiple SIMCom/Quectel Qualcomm 5G modules
compatible with 3042 / 3052 size 5G M.2 modules
Model | RM502Q-AE 5G HAT+ | RM520N-GL 5G HAT+ | RM530N-GL 5G HAT+ | SIM8262E-M2 5G HAT+ | SIM8262A-M2 5G HAT+ | ||||
---|---|---|---|---|---|---|---|---|---|
5G Module | RM502Q-AE |
RM520N-GL |
RM530N-GL |
SIM8262E-M2 |
SIM8262A-M2 |
||||
5G Standard | 3GPP R15 | 3GPP R16 | |||||||
5G | Sub-6 GHz | Sub-6G & mmWave | Sub-6 GHz | ||||||
Applicable Region | Global (except China) | Global | except Americas | Americas | |||||
Dimensions | 30.0 × 52.0 × 2.3 (mm) | 30.0 × 42.0 × 2.3 (mm) | |||||||
Frequency band | |||||||||
5G | 5G NR | - | n257, n258, n260, n261 | n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77, n78, n79 | n2, n5, n7, n12, n13, n14, n25, n30, n41, n48, n66, n71, n77, n78, n79 | ||||
5G NR NSA | n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 | n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79 | |||||||
5G NR SA | n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 | n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79 | |||||||
LTE | LTE-FDD | B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 | B1, B3, B5, B7, B8, B18, B19, B20, B26, B28, B32 | B2, B4, B5, B7, B12, B13, B14, B25, B26, B29, B30, B66, B71 | |||||
LTE-TDD | B34, B38, B39, B40, B41, B42, B43, B48 | B38, B39, B40, B41, B42, B43 | B41, B46, B48 | ||||||
LAA | B46 | - | |||||||
UMTS | WCDMA | B1, B2, B3, B4, B5, B6, B8, B19 | B1, B2, B4, B5, B8, B19 | B1, B5, B8 | B2, B4, B5 | ||||
GNSS | GPS / GLONASS / BeiDou (Compass) / Galileo / QZSS (QZSS is not supported on RM502Q-AE) | GPS / GLONASS / BeiDou / Galileo / QZSS | |||||||
Data rate | |||||||||
5G mmWave | - | downlink 4 Gbps; uplink 1.4 Gbps |
- | ||||||
5G SA Sub-6 | downlink 4.2 Gbps; uplink 450 Mbps |
downlink 2.4 Gbps; uplink 900 Mbps |
downlink 2.4 Gbps; uplink 500 Mbps |
||||||
5G NSA Sub-6 | downlink 5 Gbps; uplink 650 Mbps |
downlink 3.4 Gbps; uplink 550 Mbps |
|||||||
LTE | downlink 2 Gbps; uplink 200 Mbps |
downlink 1.6 Gbps; uplink 200 Mbps |
downlink 1.0 Gbps; uplink 200 Mbps |
||||||
UMTS | downlink 42 Mbps; uplink 5.76 Mbps |
||||||||
Note: The above are the supported 5G modules after testing; If you need to use with other 5G modules, please confirm with the module manufacturer for interface and mode compatibility. |
Supports 5G NSA (4G And 5G Co-Networking) And SA (5G Separate Networking); Supports 4G/3G Internet
* the frequency band diagram above is for reference only, please confirm the supported bands according to your local service provider.
Onboard PCIe connector, can be directly connected to Raspberry Pi 5 PCIe interface for 5G networking via 16PIN cable
* for reference only, please refer to the Package Content for detailed part list
The Raspberry Pi 5 can load the module via PCIe MHI driver
compatible with the latest Raspberry Pi OS and OpenWRT system
Raspberry Pi OS
OpenWRT
Networking other devices via network cable
Individually powered and sharing WIFI
Onboard Type-C port, supports connecting to Windows/Linux host via USB cable for 5G networking, firmware updating or debugging
Connecting to the Raspberry Pi 4B
Connecting to the PC
supports Windows/Linux systems via USB port
Supports top and bottom mounting, easy to install, good communication effect
Install on the Bottom
Install on the Top
for real-time monitoring voltage, current and power of module Via I2C
supports saving HAT+ ID and product information, compatible with HAT+ standard
Industrial Routers, Home Gateways, Set Top Boxes, Industrial Laptops, Consumer Laptops, Industrial PDAs, Rugged Industrial PCs, And Digital Signage...
Quick Overview
RM520N-GL 5G HAT+
- PCIe TO 5G HAT+ x1
- 5G-4IN1-PCB Antenna x1
- RM520N-GL 5G module x1
- Heatsink x1
- 16P-Cable-40mm cable x1
- 2x20PIN female header x1
- IPEX1 to IPEX4 cable 4PCS x1
- Screws pack x1
RM530N-GL 5G HAT+
- PCIe TO 5G HAT+ x1
- 5G-4IN1-PCB Antenna x1
- RM530N-GL 5G module x1
- Heatsink x1
- 16P-Cable-40mm cable x1
- 2x20PIN female header x1
- IPEX1 to IPEX4 cable 4PCS x1
- Screws pack x1
RM502Q-AE 5G HAT+
- PCIe TO 5G HAT+ x1
- 5G-4IN1-PCB Antenna x1
- RM502Q-AE 5G module x1
- Heatsink x1
- 16P-Cable-40mm cable x1
- 2x20PIN female header x1
- IPEX1 to IPEX4 cable 4PCS x1
- Screws pack x1
SIM8262E-M2 5G HAT+
- PCIe TO 5G HAT+ x1
- 5G-4IN1-PCB Antenna x1
- SIM8262E-M2 5G module x1
- Heatsink x1
- 16P-Cable-40mm cable x1
- 2x20PIN female header x1
- IPEX1 to IPEX4 cable 4PCS x1
- Screws pack x1
SIM8262A-M2 5G HAT+
- PCIe TO 5G HAT+ x1
- 5G-4IN1-PCB Antenna x1
- SIM8262A-M2 5G module x1
- Heatsink x1
- 16P-Cable-40mm cable x1
- 2x20PIN female header x1
- IPEX1 to IPEX4 cable 4PCS x1
- Screws pack x1