- Description
Details
5G DONGLE Module, quad antennas, USB3.1 port, Aluminum Alloy Heatsink, M.2 Key B Interface, Options For 5G Module
5G DONGLE Module
M.2 TO USB 3.1 port
Supports SIMCom / Quectel / Fibocom 5G Module
* Note: the 5G module is NOT included in the USB TO M.2 B KEY kit and needs be purchased separately. It is recommended to select the kits with 5G module, please refer to the Kit Selection table for more details.
Features at a glance
- Support 5G modules with M.2 (NGFF) Key B interface, compatible with SIMCom, Quectel, and Fibocom 5G modules
- Support 5G modules with 3042/3052 form factor, such as SIM82XX, and RM50XQ series 5G modules
- USB 3.1 Type A port for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G network
- 4x SMA antenna connectors, easy to install the antenna
- Onboard SIM card slot for NANO SIM card
- Onboard power and network indicators, with multiple reserved pads, for checking module operating status and testing other functions
- PCB ENIG process, reserved multi slots and positioning holes for integration
- Comes with customized aluminum alloy heatsink, good heat dissipation, nice-looking, protective and durable
Compatible 5G modules
| Model | SIM8202G-M2 | SIM8262E-M2 | SIM8262A-M2 | RM500U-CNV | RM500Q-GL /RM502Q-AE |
RM520N-GL | RM530N-GL |
|---|---|---|---|---|---|---|---|
| 5G Standard | 3GPP R15 | 3GPP R16 | 3GPP R15 | 3GPP R16 | |||
| Applicable regions | except Americas | Americas | China, EMEA, Asia-Pacific | RM500Q-GL: Global (except US) RM502Q-AE: Global (except China) |
Global | ||
| Chip | Qualcomm Snapdragon X55 | Qualcomm Snapdragon X62 | UNISOC | Qualcomm Snapdragon X55 | Qualcomm Snapdragon X62 | ||
| Frequency band | |||||||
| Sub-6G | n1, n2, n3, n5, n7, n8, n12, n20, n28, n38, n40, n41, n66, n71, n77, n78, n79 | n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77, n78, n79 | n2, n5, n7, n12, n13, n14, n25, n30, n41, n48, n66, n71, n77, n78, n79 | 5G NR NSA：n41, n78, n79; 5G NR SA：n1, n3, n5, n8, n28, n41, n77, n78, n7 |
RM500Q-GL: n41, n77, n78, n79; RM502Q-AE (5G NR NSA): n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 |
5G NR NSA:n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79 | |
| LTE-FDD | B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 | B1, B3, B5, B7, B8, B18, B19, B20, B26, B28, B32 | B2, B4, B5, B7, B12, B13, B14, B25, B26, B29, B30, B66, B71 | B1, B2, B3, B5, B7, B8 | B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 | ||
| LTE-TDD | B34, B38, B39, B40, B41, B42, B43, B48 | B38, B39, B40, B41, B42, B43 | B41, B46, B48 | B34, B38, B39, B40, B41 | B34, B38, B39, B40, B41, B42, B43, B48 | ||
| LAA | - | B46 | |||||
| WCDMA | B1, B2, B3, B4, B5, B8 | B1, B5, B8 | B2, B4, B5 | B1, B2, B5, B8 | B1, B2, B3, B4, B5, B6, B8, B19 | B1, B2, B4, B5, B8, B19 | |
| GNSS | RM500U-CNV: does not support GNSS RM500Q-GL, RM502Q-AE: supports GPS / GLONASS / BeiDou(Compass) / Galileo SIM8202G-M2, SIM8262X-M2, RM5X0N-GL: supports GPS / GLONASS / BeiDou(Compass) / Galileo / QZSS |
||||||
| Note: 5G module is optonal. This table only lists some supported models after actual testing, and the pin compatibility should be tested if used with other models. | |||||||
Multiple size compatibility
Compatible With 3042 / 3052 Form Factor
Connection examples
Supports directly connect or access via the USB cable to Windows PC, Raspberry Pi 4B/3B+, CM4-IO-BASE-A/B and Jetson Nano series
connecting with Raspberry Pi 4B
Connect to PC with USB cable
Connect to Jetson Nano
for reference only, the modules in the pictures are not included.
USB Cable Upgrade
Upgrades to a USB3.0 extension cable with an auxiliary power supply port, prevent the power insufficient issue of the USB port when 5G module power consumption is too high, which may affect the networking and speed measurement effect of the module
Multi system support, easy to use
Supports Windows/Linux
Just plug it into USB port, go through some simple configuration, the high speed 5G network connection will be ready to use
Aluminum Alloy Heatsink
Effective Heat Dissipation For 5G Module, Protect Your HAT At The Same Time
Product show
Outline Dimensions
* Note: The above dimensions are measured manually, there is a certain error
Kit Selection
| Model | Package | Description | Application |
|---|---|---|---|
| USB TO M.2 B KEY |  |
5G DONGLE module, Supports USB 3.1 to 5G, 5G module is NOT included and needs to be purchased separately | The 5G module needs to be purchased separately. Compatible with SIMCom/Quectel/Fibocom 5G modules in the table above |
| RM520N-GL 5G DONGLE |  |
5G DONGLE module, Supports USB 3.1 to 5G, includes RM520N-GL global band 5G module | Comes with Qualcomm global band RM520N-GL 5G Sub-6G module for testing and evaluating, supports accessing 5G network via USB3.1 port |
| RM530N-GL 5G DONGLE |  |
5G DONGLE module, Supports USB 3.1 to 5G, includes RM530N-GL global band 5G module | Comes with Qualcomm global band RM530N-GL 5G Sub-6G & mmWave module for testing and evaluating, supports accessing 5G network via USB3.1 port |
Quick Overview
USB TO M.2 B KEY
- USB TO M.2 B KEY x 1
- Aluminum Alloy case (top and bottom) x 1
- Antenna x 4
- IPEX adapter cable x 4
- USB3.0 female to dual USB male extension cable x 1
- SMA Protective Cap x 4
- Thermal tape x 1
- Screws pack x 1
RM520N-GL 5G DONGLE
- USB TO M.2 B KEY x 1
- RM520N-GL x 1
- Aluminum Alloy case (top and bottom) x 1
- Antenna x 4
- IPEX adapter cable x 4
- USB3.0 female to dual USB male extension cable x 1
- SMA Protective Cap x 4
- Thermal tape x 1
- Screws pack x 1
RM530N-GL 5G DONGLE
- USB TO M.2 B KEY x 1
- RM530N-GL x 1
- Aluminum Alloy case (top and bottom) x 1
- Antenna x 4
- IPEX adapter cable x 4
- USB3.0 female to dual USB male extension cable x 1
- SMA Protective Cap x 4
- Thermal tape x 1
- Screws pack x 1
