Details
ESP32-S3 2.8inch Display Development Board, 240×320, IPS, 32-bit LX7 Dual-core Processor, Up to 240MHz Frequency, Supports WiFi & Bluetooth, With Onboard Antenna, ESP32 With Display
ESP32-S3-Touch-LCD-2.8
Integrates SPI interface display, 240×320 Pixels, multiple peripheral interfaces
Version Options
ESP32-S3-LCD-2.8
without touch control
ESP32-S3-Touch-LCD-2.8
with touch control
Features
This product is a microcontroller development board with 2.4GHz WiFi and Bluetooth BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 2.8inch LCD screen (optional for touch function) can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.
- Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
- Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
- Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
- Onboard 2.8inch LCD display, 240×320 resolution, 262K color
- Optional for capacitive touch function controlled via I2C interface, 5-point touch, with interrupt support
- Adapting UART, I2C and some IO interfaces, integrates full-speed USB port
- Onboard speaker, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
- Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
Application Scenarios
IPS Display Panel
Excellent display performance, 262K color, wide viewing angle
Capacitive 5-point touch
Optional for capacitive touch function controlled via I2C interface for flexible operation and smooth UI interaction, 5-point touch, with interrupt support
* the touch function is only available on ESP32-S3-Touch-LCD-2.8 version
Supports multiple peripherals
Supports the expansion of multiple peripherals via GPIO, UART and I2C interfaces, etc.
Application Example
* the Lithium battery is NOT Included, please refer to the Package Content for the detailed part list
What's On Board
- ESP32-S3R8
dual-core processor, up to 240MHz operating frequency - 16MB Flash
- QST attitude sensor
QMI8658C (6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer) - RTC chip
PCF85063 RTC chip - PCM5101 audio decoder
- Amplifier chip
- Volume adjustment knob
- Battery recharge manager
- ME6217C33M5G
Low dropout regulator, 800mA output (Max.) - Onboard ceramic antenna
- IPEX1 connector and switching resistor
Switching to use external antenna via resoldering the resistor - TF card slot
Supports TF card up to 16GB - Battery power supply control button
Relevant driver program is required
- RESET button
- BOOT button
- USB Type-C port
- 12PIN multi-functional pin header
- I2C header
connecting with internal chip, only supports the I2C peripherals and cannot be mapped to other functions - UART header
- MX1.25 battery header
MX1.25 2PIN connector, for 3.7V Lithium battery, supports charging and discharging - RTC battery header
for connecting rechargeable RTC battery - Speaker header
Comes with 8Ω 2W 2030 speaker - Power indicator
- Charge indicator
Lithium battery charge indicator, lights up when charging, off when fully charged (the light status is uncertain when the battery is not connected)
outline dimensions
ESP32-S3-LCD-2.8
ESP32-S3-Touch-LCD-2.8
ESP32 LCD Selection
| Model | display | onboard resources | Peripheral interfaces | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| pixels | Interface | Display | Touch | IMU | RTC | TF | Buzzer | Speaker | mic | battery header |
antenna | ||||
| AMOLED display | |||||||||||||||
 ESP32-S3-Touch-AMOLED-1.91 |
240 × 536 | QSPI | RM67162 | FT3168 | √ | - | √ | - | - | - | √ | √ | 40PIN header | ||
 ESP32-S3-AMOLED-1.91 |
240 × 536 | QSPI | RM67162 | - | √ | - | √ | - | - | - | √ | √ | 40PIN header | ||
 ESP32-S3-Touch-AMOLED-1.8 |
368 × 448 | QSPI | SH8601 | FT3168 | √ | √ | √ | - | √ | √ | √ | √ | I2C, UART, GPIO pads | ||
 ESP32-S3-Touch-AMOLED-1.43 |
466 × 466 | QSPI | SH8601/C05300 | FT3168 | √ | √ | √ | - | - | - | √ | √ | I2C, UART, USB, 2 × 14PIN headers | ||
 ESP32-S3-Touch-AMOLED-1.43-B |
466 × 466 | QSPI | SH8601/C05300 | FT3168 | √ | √ | √ | - | - | - | √ | √ | I2C, UART, USB, 2 × 14PIN headers | ||
| LCD display | |||||||||||||||
 ESP32-S3-Touch-LCD-2.8 |
240 × 320 | SPI | ST7789 | CST328 | √ | √ | √ | - | √ | - | √ | √ | I2C, UART, SH1.0 12PIN header | ||
 ESP32-S3-LCD-2.8 |
240 × 320 | SPI | ST7789 | - | √ | √ | √ | - | √ | - | √ | √ | I2C, UART, SH1.0 12PIN header | ||
 ESP32-S3-LCD-2.8B |
480 × 640 | SPI | ST7701 | - | √ | √ | √ | - | √ | √ | √ | √ | 20PIN header | ||
 ESP32-S3-Touch-LCD-2.8B |
480 × 640 | SPI | ST7701 | GT911 | √ | √ | √ | - | √ | √ | √ | √ | 20PIN header | ||
 ESP32-S3-Touch-LCD-2.8C |
480 × 480 | RGB | ST7701 | GT911 | √ | √ | √ | √ | - | - | √ | √ | I2C, UART, SH1.0 12PIN header | ||
 ESP32-S3-Touch-LCD-2.1 |
480 × 480 | RGB | ST7701 | CST820 | √ | √ | √ | √ | - | - | √ | √ | I2C, UART, SH1.0 12PIN header | ||
 ESP32-S3-Touch-LCD-2 |
240 × 320 | SPI | ST7789T3 | CST816 | √ | - | √ | - | - | - | √ | √ | 28PIN header, camera interface | ||
 ESP32-S3-LCD-2 |
240 × 320 | SPI | ST7789T3 | - | √ | - | √ | - | - | - | √ | √ | 28PIN header, camera interface | ||
 ESP32-S3-Touch-LCD-1.85 |
360 × 360 | QSPI | ST77916 | CST816 | √ | √ | √ | - | √ | √ | √ | √ | I2C, UART, GPIO pads | ||
 ESP32-S3-LCD-1.85 |
360 × 360 | QSPI | ST77916 | - | √ | √ | √ | - | √ | √ | √ | √ | I2C, UART, GPIO pads | ||
 ESP32-S3-Touch-LCD-1.69 |
240 × 280 | SPI | ST7789 | CST816 | √ | √ | - | √ | - | - | √ | √ | I2C, UART, GPIO pads | ||
 ESP32-S3-LCD-1.69 |
240 × 280 | SPI | ST7789 | - | √ | √ | - | √ | - | - | √ | √ | SH1.0 12PIN header | ||
 ESP32-S3-LCD-1.47 |
172 × 320 | SPI | ST7789 | - | - | - | √ | - | - | - | - | √ | 18PIN header | ||
 ESP32-C6-LCD-1.47 |
172 × 320 | SPI | ST7789 | - | - | - | √ | - | - | - | - | √ | 18PIN header | ||
 ESP32-S3-Touch-LCD-1.46B |
412 × 412 | QSPI | SPD2010 | SPD2010 | √ | √ | √ | - | √ | √ | √ | √ | 20pin GPIO header | ||
 ESP32-S3-Touch-LCD-1.46 |
412 × 412 | QSPI | SPD2010 | SPD2010 | √ | √ | √ | - | √ | √ | √ | √ | 20pin GPIO header | ||
 ESP32-S3-Touch-LCD-1.28 |
240 × 240 | SPI | GC9A01A | CST816 | √ | - | - | - | - | - | √ | √ | SH1.0 12PIN header | ||
 ESP32-S3-LCD-1.28 |
240 × 240 | SPI | GC9A01A | - | √ | - | - | - | - | - | √ | √ | 2 × 20PIN header (1.27mm pitch) | ||
 ESP32-C3-LCD-0.71 |
160 × 160 | SPI | GC9D01 | - | - | - | - | - | - | - | √ | √ | 12PIN GPIO pads | ||
 ESP32-S3-GEEK |
240 × 135 | SPI | GC9A01A | - | - | - | √ | - | - | - | - | √ | I2C, UART, GPIO | ||
Quick Overview
ESP32-S3-LCD-2.8
- ESP32-S3-LCD-2.8 x1
- SH1.0 12PIN cable ~100mm ×1
- SH1.0 4PIN cable ~100mm (2pcs) ×1
- 2030 speaker ×1
ESP32-S3-Touch-LCD-2.8
- ESP32-S3-Touch-LCD-2.8 x1
- SH1.0 12PIN cable ~100mm ×1
- SH1.0 4PIN cable ~100mm (2pcs) ×1
- 2030 speaker ×1
